kernel/linux.git/drivers/gpu/drm/bridge, branch v7.0-rc7

drm/bridge: dw-hdmi-qp: fix multi-channel audio output

2026-03-17T17:15:16+00:00

Channel Allocation (PB4) and Level Shift Information (PB5) are configured with values from PB1 and PB2 due to the wrong offset being used. This results in missing audio channels or incorrect speaker placement when playing multi-channel audio. Use the correct offset to fix multi-channel audio output. Fixes: fd0141d1a8a2 ("drm/bridge: synopsys: Add audio support for dw-hdmi-qp") Reported-by: Christian Hewitt Signed-off-by: Jonas Karlman Signed-off-by: Christian Hewitt Reviewed-by: Cristian Ciocaltea Link: https://patch.msgid.link/20260228112822.4056354-1-christianshewitt@gmail.com Signed-off-by: Luca Ceresoli

drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output

2026-03-09T21:32:22+00:00

Dual LVDS output (available on the SN65DSI84) requires HSYNC_PULSE_WIDTH and HORIZONTAL_BACK_PORCH to be divided by two with respect to the values used for single LVDS output. While not clearly stated in the datasheet, this is needed according to the DSI Tuner [0] output. It also makes sense intuitively because in dual LVDS output two pixels at a time are output and so the output clock is half of the pixel clock. Some dual-LVDS panels refuse to show any picture without this fix. Divide by two HORIZONTAL_FRONT_PORCH too, even though this register is used only for test pattern generation which is not currently implemented by this driver. [0] https://www.ti.com/tool/DSI-TUNER Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Cc: stable@vger.kernel.org Reviewed-by: Marek Vasut Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-2-2e15f5a9a6a0@bootlin.com Signed-off-by: Luca Ceresoli

drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding

2026-03-09T21:32:05+00:00

The DSI frequency must be in the range: (CHA_DSI_CLK_RANGE * 5 MHz) <= DSI freq < ((CHA_DSI_CLK_RANGE + 1) * 5 MHz) So the register value should point to the lower range value, but DIV_ROUND_UP() rounds the division to the higher range value, resulting in an excess of 1 (unless the frequency is an exact multiple of 5 MHz). For example for a 437100000 MHz clock CHA_DSI_CLK_RANGE should be 87 (0x57): (87 * 5 = 435) <= 437.1 < (88 * 5 = 440) but current code returns 88 (0x58). Fix the computation by removing the DIV_ROUND_UP(). Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Cc: stable@vger.kernel.org Reviewed-by: Marek Vasut Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-1-2e15f5a9a6a0@bootlin.com Signed-off-by: Luca Ceresoli

Merge drm/drm-fixes into drm-misc-fixes

2026-02-23T09:09:45+00:00

7.0-rc1 was just released, let's merge it to kick the new release cycle. Signed-off-by: Maxime Ripard

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook

drm/bridge: samsung-dsim: Fix memory leak in error path

2026-02-20T12:56:14+00:00

In samsung_dsim_host_attach(), drm_bridge_add() is called to add the bridge. However, if samsung_dsim_register_te_irq() or pdata->host_ops->attach() fails afterwards, the function returns without removing the bridge, causing a memory leak. Fix this by adding proper error handling with goto labels to ensure drm_bridge_remove() is called in all error paths. Also ensure that samsung_dsim_unregister_te_irq() is called if the attach operation fails after the TE IRQ has been registered. samsung_dsim_unregister_te_irq() function is moved without changes to be before samsung_dsim_host_attach() to avoid forward declaration. Fixes: e7447128ca4a ("drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge") Cc: stable@vger.kernel.org Signed-off-by: Osama Abdelkader Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20260209184115.10937-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli

drm/bridge: synopsys: dw-dp: Check return value of devm_drm_bridge_add() in dw_dp_bind()

2026-02-20T12:47:09+00:00

Return the value of devm_drm_bridge_add() in order to propagate the error properly, if it fails due to resource allocation failure or bridge registration failure. This ensures that the bind function fails safely rather than proceeding with a potentially incomplete bridge setup. Fixes: b726970486d8 ("drm/bridge: synopsys: dw-dp: add bridge before attaching") Signed-off-by: Chen Ni Reviewed-by: Andy Yan Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20260206040621.4095517-1-nichen@iscas.ac.cn Signed-off-by: Luca Ceresoli

drm/bridge: ti-sn65dsi86: Enable HPD polling if IRQ is not used

2026-02-13T20:42:34+00:00

Fallback to polling to detect hotplug events on systems without interrupts. On systems where the interrupt line of the bridge is not connected, the bridge cannot notify hotplug events. Only add the DRM_BRIDGE_OP_HPD flag if an interrupt has been registered otherwise remain in polling mode. Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type") Cc: stable@vger.kernel.org # 6.16: 9133bc3f0564: drm/bridge: ti-sn65dsi86: Add Signed-off-by: Franz Schnyder Reviewed-by: Douglas Anderson [dianders: Adjusted Fixes/stable line based on discussion] Signed-off-by: Douglas Anderson Link: https://patch.msgid.link/20260206123758.374555-1-fra.schnyder@gmail.com

Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel

2026-02-11T20:55:44+00:00

Pull drm updates from Dave Airlie: "Highlights: - amdgpu support for lots of new IP blocks which means newer GPUs - xe has a lot of SR-IOV and SVM improvements - lots of intel display refactoring across i915/xe - msm has more support for gen8 platforms - Given up on kgdb/kms integration, it's too hard on modern hw core: - drop kgdb support - replace system workqueue with percpu - account for property blobs in memcg - MAINTAINERS updates for xe + buddy rust: - Fix documentation for Registration constructors - Use pin_init::zeroed() for fops initialization - Annotate DRM helpers with __rust_helper - Improve safety documentation for gem::Object::new() - Update AlwaysRefCounted imports - mm: Prevent integer overflow in page_align() atomic: - add drm_device pointer to drm_private_obj - introduce gamma/degamma LUT size check buddy: - fix free_trees memory leak - prevent BUG_ON bridge: - introduce drm_bridge_unplug/enter/exit - add connector argument to .hpd_notify - lots of recounting conversions - convert rockchip inno hdmi to bridge - lontium-lt9611uxc: switch to HDMI audio helpers - dw-hdmi-qp: add support for HPD-less setups - Algoltek AG6311 support panels: - edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H - st75751: add SPI support - Sitronix ST7920, Samsung LTL106HL02 - LG LH546WF1-ED01, HannStar HSD156J - BOE NV130WUM-T08 - Innolux G150XGE-L05 - Anbernic RG-DS dma-buf: - improve sg_table debugging - add tracepoints - call clear_page instead of memset - start to introduce cgroup memory accounting in heaps - remove sysfs stats dma-fence: - add new helpers dp: - mst: avoid oob access with vcpi=0 hdmi: - limit infoframes exposure to userspace gem: - reduce page table overhead with THP - fix leak in drm_gem_get_unmapped_area gpuvm: - API sanitation for rust bindings sched: - introduce new helpers panic: - report invalid panic modes - add kunit tests i915/xe display: - Expose sharpness only if num_scalers is >= 2 - Add initial Xe3P_LPD for NVL - BMG FBC support - Add MTL+ platforms to support dpll framework _ fix DIMM_S DRM decoding on ICL - Return to using AUX interrupts - PSR/Panel replay refactoring - use consolidation HDMI tables - Xe3_LPD CD2X dividier changes xe: - vfio: add vfio_pci for intel GPU - multi queue support - dynamic pagemaps and multi-device SVM - expose temp attribs in hwmon - NO_COMPRESSION bo flag - expose MERT OA unit - sysfs survivability refactor - SRIOV PF: add MERT support - enable SR-IOV VF migration - Enable I2C/NVM on Crescent Island - Xe3p page reclaimation support - introduce SRIOV scheduler groups - add SoC remappt support in system controller - insert compiler barriers in GuC code - define NVL GuC firmware - handle GT resume failure - fix drm scheduler layering violations - enable GSC loading and PXP for PTL - disable GuC Power DCC strategy on PTL - unregister drm device on probe error i915: - move to kernel standard fault injection - bump recommended GuC version for DG2 and MTL amdgpu: - SMUIO 15.x, PSP 15.x support - IH 6.1.1/7.1 support - MMHUB 3.4/4.2 support - GC 11.5.4/12.1 support - SDMA 6.1.4/7.1/7.11.4 support - JPEG 5.3 support - UserQ updates - GC 9 gfx queue reset support - TTM memory ops parallelization - convert legacy logging to new helpers - DC analog fixes amdkfd: - GC 11.5.4/12.1 suppport - SDMA 6.1.4/7.1 support - per context support - increase kfd process hash table - Reserved SDMA rework radeon: - convert legacy logging to new helpers - use devm for i2c adapters msm: - GPU - Document a612/RGMU dt bindings - UBWC 6.0 support (for A840 / Kaanapali) - a225 support - DPU: - Switch to use virtual planes by default - Fix DSI CMD panels on DPU 3.x - Rewrite format handling to remove intermediate representation - Fix watchdog on DPU 8.x+ - Fix TE / Vsync source setting on DPU 8.x+ - Add 3D_Mux on SC7280 - Kaanapali platform support - Fix UBWC register programming - Make RM reserve DSPP-enabled mixers for CRTCs with LMs - Gamma correction support - DP: - Enable support for eDP 1.4+ link rate tables - Fix MDSS1 DP indices on SA8775P, making them to work - Fix msm_dp_ctrl_config_msa() to work with LLVM 20 - DSI: - Document QCS8300 as compatible with SA8775P - Kaanapali platform support - DSI PHY: - switch to divider_determine_rate() - MDP5: - Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU) - MDSS: - Kaanapali platform support - Fixed UBWC register programming nova-core: - Prepare for Turing support. This includes parsing and handling Turing-specific firmware headers and sections as well as a Turing Falcon HAL implementation - Get rid of the Result> anti-pattern - Relocate initializer-specific code into the appropriate initializer - Use CStr::from_bytes_until_nul() to remove custom helpers - Improve handling of unexpected firmware values - Clean up redundant debug prints - Replace c_str!() with native Rust C-string literals - Update nova-core task list nova: - Align GEM object size to system page size tyr: - Use generated uAPI bindings for GpuInfo - Replace manual sleeps with read_poll_timeout() - Replace c_str!() with native Rust C-string literals - Suppress warnings for unread fields - Fix incorrect register name in print statement nouveau: - fix big page table support races in PTE management - improve reclocking on tegra 186+ amdxdna: - fix suspend race conditions - improve handling of zero tail pointers - fix cu_idx overwritten during command setup - enable hardware context priority - remove NPU2 support - update message buffer allocation requirements - update firmware version check ast: - support imported cursor buffers - big endian fixes etnaviv: - add PPU flop reset support imagination: - add AM62P support - introduce hw version checks ivpu: - implement warm boot flow panfrost: - add bo sync ioctl - add GPU_PM_RT support for RZ/G3E SoC panthor: - add bo sync ioctl - enable timestamp propagation - scheduler robustness improvements - VM termination fixes - huge page support rockchip: - RK3368 HDMI Support - get rid of atomic_check fixups - RK3506 support - RK3576/RK3588 improved HPD handling rz-du: - RZ/V2H(P) MIPI-DSI Support v3d: - fix DMA segment size - convert to new logging helpers mediatek: - move DP training to hotplug thread - convert logging to new helpers - add support for HS speed DSI - Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support atmel-hlcdc: - switch to drmm resource - support nomodeset - use newer helpers hisilicon: - fix various DP bugs renesas: - fix kernel panic on reboot exynos: - fix vidi_connection_ioctl using wrong device - fix vidi_connection deref user ptr - fix concurrency regression with vidi_context vkms: - add configfs support for display configuration * tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits) drm/xe/pm: Disable D3Cold for BMG only on specific platforms drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early drm/xe: Fix kerneldoc for xe_migrate_exec_queue drm/xe/query: Fix topology query pointer advance drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header drm/xe/guc: Fix CFI violation in debugfs access. accel/amdxdna: Move RPM resume into job run function accel/amdxdna: Fix incorrect DPM level after suspend/resume nouveau/vmm: start tracking if the LPT PTE is valid. (v6) nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2) nouveau/vmm: rewrite pte tracker using a struct and bitfields. accel/amdxdna: Fix incorrect error code returned for failed chain command accel/amdxdna: Remove hardware context status drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe() drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc drm/i915/display: fix the pixel normalization handling for xe3p_lpd drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free drm/exynos: vidi: fix to avoid directly dereferencing user pointer drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() ...