kernel/linux.git/drivers/gpu/drm/bridge, branch v6.18.34

drm/bridge: megachips: remove bridge when irq request fails

2026-06-01T15:50:48+00:00

commit d45d5c819f2cd0b6b5d76a194a537a5f4aeefecb upstream. If devm_request_threaded_irq() fails after drm_bridge_add(), remove the bridge before returning. Keep drm_bridge_add() rather than devm_drm_bridge_add(): registration is tied to the STDP4028 device while ge_b850v3_register() may complete from either I2C probe; devm would not unwind the bridge if the other client's probe fails. Signed-off-by: Osama Abdelkader Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Tested-by: Ian Ray Link: https://patch.msgid.link/20260430195700.80317-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman

drm/bridge: it66121: acquire reset GPIO in probe

2026-06-01T15:50:47+00:00

commit e02b5262fd288cc235f14e12233ea54e78c04611 upstream. The it66121_ctx structure has a gpio_reset field, and it66121_hw_reset() calls gpiod_set_value() on it. However, the GPIO descriptor is never acquired via devm_gpiod_get(), leaving gpio_reset as NULL throughout the driver lifetime. gpiod_set_value() silently returns when passed a NULL descriptor, so the hardware reset sequence in it66121_hw_reset() is a no-op. This leaves the chip in an undefined state at probe time, which can prevent it from responding on the I2C bus. The DT binding marks reset-gpios as a required property, so all compliant device trees provide this GPIO. Add the missing devm_gpiod_get() call after enabling power supplies and before the hardware reset, so the chip is properly reset with power applied. Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Cc: stable@vger.kernel.org Signed-off-by: Julien Chauveau Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Link: https://patch.msgid.link/20260324193011.16583-1-chauveau.julien@gmail.com Signed-off-by: Javier Martinez Canillas Signed-off-by: Greg Kroah-Hartman

drm/bridge: chipone-icn6211: use devm_drm_bridge_add in i2c probe

2026-06-01T15:50:46+00:00

commit 73d01051e8040c0b1de7fd26b3b8d0c2ffa6895c upstream. Use devm_drm_bridge_add() so the bridge is released if probe fails after registration, and drop drm_bridge_remove() in chipone_i2c_probe. Signed-off-by: Osama Abdelkader Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20260430194944.78119-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman

drm/bridge: cadence: cdns-mhdp8546-core: Handle HDCP state in bridge atomic check

2026-05-23T11:06:35+00:00

[ Upstream commit 4a8edd658489ec2a3d7e20482fa9e8d366153d8d ] Now that we have DRM_BRIDGE_ATTACH_NO_CONNECTOR framework, handle the HDCP state change in bridge atomic check as well to enable correct functioning for HDCP in both DRM_BRIDGE_ATTACH_NO_CONNECTOR and !DRM_BRIDGE_ATTACH_NO_CONNECTOR case. Without this patch, when using DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, HDCP state changes would not be properly handled during atomic commits, potentially leading to HDCP authentication failures or incorrect protection status for content requiring HDCP encryption. Fixes: 6a3608eae6d33 ("drm: bridge: cdns-mhdp8546: Enable HDCP") Signed-off-by: Harikrishna Shenoy Reviewed-by: Luca Ceresoli Reviewed-by: Tomi Valkeinen Link: https://patch.msgid.link/20251209120332.3559893-4-h-shenoy@ti.com Signed-off-by: Luca Ceresoli Signed-off-by: Sasha Levin

drm/bridge: cadence: cdns-mhdp8546-core: Add mode_valid hook to drm_bridge_funcs

2026-05-23T11:06:35+00:00

[ Upstream commit 6dbff34016052b099558b76632e4983e2df13fed ] Add cdns_mhdp_bridge_mode_valid() to check if specific mode is valid for this bridge or not. In the legacy usecase with !DRM_BRIDGE_ATTACH_NO_CONNECTOR we were using the hook from drm_connector_helper_funcs but with DRM_BRIDGE_ATTACH_NO_CONNECTOR we need to have mode_valid() in drm_bridge_funcs. Without this patch, when using DRM_BRIDGE_ATTACH_NO_CONNECTOR flag, the cdns_mhdp_bandwidth_ok() function would not be called during mode validation, potentially allowing modes that exceed the bridge's bandwidth capabilities to be incorrectly marked as valid. Fixes: c932ced6b585 ("drm/tidss: Update encoder/bridge chain connect model") Reviewed-by: Tomi Valkeinen Signed-off-by: Jayesh Choudhary Signed-off-by: Harikrishna Shenoy Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20251209120332.3559893-3-h-shenoy@ti.com Signed-off-by: Luca Ceresoli Signed-off-by: Sasha Levin

drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable()

2026-05-23T11:06:35+00:00

[ Upstream commit 43d6508ddbf9fb974fbc359a033154f78c9d4c8b ] In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read() in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit NULL pointer while trying to access the mutex. We need the connector to be set before that. Unlike in legacy cases with flag !DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised in bridge_attach(), so add the mhdp->connector_ptr in device structure to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and !DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to avoid possible NULL pointer dereference in recovery paths like modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set. Fixes: c932ced6b585 ("drm/tidss: Update encoder/bridge chain connect model") Signed-off-by: Jayesh Choudhary Signed-off-by: Harikrishna Shenoy Reviewed-by: Luca Ceresoli Reviewed-by: Tomi Valkeinen Link: https://patch.msgid.link/20251209120332.3559893-2-h-shenoy@ti.com Signed-off-by: Luca Ceresoli Signed-off-by: Sasha Levin

drm/bridge: tda998x: Use __be32 for audio port OF property pointer

2026-05-17T15:15:33+00:00

commit 2a46a9356ba7b1bdd741c8b41e5374edcd960557 upstream. of_get_property() returns a pointer to big-endian (__be32) data, but port_data in tda998x_get_audio_ports() was declared as const u32 *, causing a sparse endianness type mismatch warning. Fix the declaration to use const __be32 *. Fixes: 7e567624dc5a4 ("drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding") Cc: stable@vger.kernel.org Signed-off-by: Kory Maincent (TI) Reviewed-by: Russell King (Oracle) Link: https://patch.msgid.link/20260428090457.121894-1-kory.maincent@bootlin.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman

drm/bridge: dw-hdmi-qp: fix multi-channel audio output

2026-03-25T10:10:45+00:00

[ Upstream commit cffcb42c57686e9a801dfcf37a3d0c62e51c1c3e ] Channel Allocation (PB4) and Level Shift Information (PB5) are configured with values from PB1 and PB2 due to the wrong offset being used. This results in missing audio channels or incorrect speaker placement when playing multi-channel audio. Use the correct offset to fix multi-channel audio output. Fixes: fd0141d1a8a2 ("drm/bridge: synopsys: Add audio support for dw-hdmi-qp") Reported-by: Christian Hewitt Signed-off-by: Jonas Karlman Signed-off-by: Christian Hewitt Reviewed-by: Cristian Ciocaltea Link: https://patch.msgid.link/20260228112822.4056354-1-christianshewitt@gmail.com Signed-off-by: Luca Ceresoli Signed-off-by: Sasha Levin

drm/bridge: ti-sn65dsi86: Add support for DisplayPort mode with HPD

2026-03-19T15:08:51+00:00

commit 9133bc3f0564890218cbba6cc7e81ebc0841a6f1 upstream. Add support for DisplayPort to the bridge, which entails the following: - Get and use an interrupt for HPD; - Properly clear all status bits in the interrupt handler; Signed-off-by: John Ripple Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20250915174543.2564994-1-john.ripple@keysight.com Signed-off-by: Greg Kroah-Hartman

drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output

2026-03-19T15:08:41+00:00

commit d0d727746944096a6681dc6adb5f123fc5aa018d upstream. Dual LVDS output (available on the SN65DSI84) requires HSYNC_PULSE_WIDTH and HORIZONTAL_BACK_PORCH to be divided by two with respect to the values used for single LVDS output. While not clearly stated in the datasheet, this is needed according to the DSI Tuner [0] output. It also makes sense intuitively because in dual LVDS output two pixels at a time are output and so the output clock is half of the pixel clock. Some dual-LVDS panels refuse to show any picture without this fix. Divide by two HORIZONTAL_FRONT_PORCH too, even though this register is used only for test pattern generation which is not currently implemented by this driver. [0] https://www.ti.com/tool/DSI-TUNER Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Cc: stable@vger.kernel.org Reviewed-by: Marek Vasut Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-2-2e15f5a9a6a0@bootlin.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman