kernel/linux.git/drivers/gpu/drm/bridge, branch v6.11.8

drm/bridge: Fix assignment of the of_node of the parent to aux bridge

2024-11-01T01:02:42+00:00

commit 85e444a68126a631221ae32c63fce882bb18a262 upstream. The assignment of the of_node to the aux bridge needs to mark the of_node as reused as well, otherwise resource providers like pinctrl will report a gpio as already requested by a different device when both pinconf and gpios property are present. Fix that by using the device_set_of_node_from_dev() helper instead. Fixes: 6914968a0b52 ("drm/bridge: properly refcount DT nodes in aux bridge drivers") Cc: stable@vger.kernel.org # 6.8 Cc: Dmitry Baryshkov Signed-off-by: Abel Vesa Reviewed-by: Dmitry Baryshkov Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20241018-drm-aux-bridge-mark-of-node-reused-v2-1-aeed1b445c7d@linaro.org Signed-off-by: Greg Kroah-Hartman

drm/bridge: lontium-lt8912b: Validate mode in drm_bridge_funcs::mode_valid()

2024-10-04T14:37:46+00:00

[ Upstream commit fe828fbd87786238b30f44cafd698d975d956c97 ] If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set, this driver won't initialize a connector and hence display mode won't be validated in drm_connector_helper_funcs::mode_valid(). So, move the mode validation from drm_connector_helper_funcs::mode_valid() to drm_bridge_funcs::mode_valid(), because the mode validation is always done for the bridge. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Liu Ying Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com Signed-off-by: Sasha Levin

drm/bridge-connector: move to DRM_DISPLAY_HELPER module

2024-09-03T08:18:31+00:00

drm_bridge_connector is a "leaf" driver, belonging to the display helper, rather than the "CRTC" drm_kms_helper module. Move the driver to the drm/display and add necessary Kconfig selection clauses. Suggested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.org Signed-off-by: Maxime Ripard

Merge tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel

2024-07-18T16:34:02+00:00

Pull drm updates from Dave Airlie: "There's a lot of stuff in here, amd, i915 and xe have new platform work, lots of core rework around EDID handling, some new COMPILE_TEST options, maintainer changes and a lots of other stuff. Summary: core: - deprecate DRM data and return 0 date - connector: Create a set of helpers to help with HDMI support - Remove driver owner assignments - Allow more drivers to compile with COMPILE_TEST - Conversions to drm_edid - Sprinkle MODULE_DESCRIPTIONS everywhere they are missing - Remove drm_mm_replace_node - print: Add a drm prefix to warn level messages too, remove ___drm_dbg, consolidate prefix handling - New monochrome TV mode variant ttm: - improve number of page faults on some platforms - fix test builds under PREEMPT_RT - more test coverage ci: - Require a more recent version of mesa - improve farm setup and test generation dma-buf: - warn if reserving 0 fence slots - internal API heap enhancements fbdev: - Create memory manager optimized fbdev emulation panic: - Allow to select fonts - improve drm_fb_dma_get_scanout_buffer - Allow to dump kmsg to the screen bridge: - Remove redundant checks on bridge->encoder - Remove drm_bridge_chain_mode_fixup - bridge-connector: Plumb in the new HDMI helper - analogix_dp: Various improvements, handle AUX transfers timeout - samsung-dsim: Fix timings calculation - tc358767: Plenty of small fixes, fix no connector attach, fix clocks - sii902x: state validation improvements panels: - Switch panels from register table initialization to proper code - Now that the panel code tracks the panel state, remove every ad-hoc implementation in the panel drivers - More cleanup of prepare / enable state tracking in drivers - edp: Drop legacy panel compatibles - simple-bridge: Switch to devm_drm_bridge_add - New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology 13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0, BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView PM070WL4, Lincoln Technologies LCD197, Ortustech COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti amdgpu: - DCN 4.0.x support - GC 12.0 support - GMC 12.0 support - SDMA 7.0 support - MES12 support - MMHUB 4.1 support - GFX12 modifier and DCC support - lots of IP fixes/updates amdkfd: - Contiguous VRAM allocations - GC 12.0 support - SDMA 7.0 support - SR-IOV fixes - KFD GFX ALU exceptions i915: - Battlemage Xe2 HPD display enablement - Panel Replay enabling - DP AUX-less ALPM/LOBF - Enable link training failure fallback for DP MST links - CMRR (Content Match Refresh Rate) enabling - Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps - Enable eDP AUX based HDR backlight - Support replaying GPU hangs with captured context image - Automate CCS Mode setting during engine resets - lots of refactoring - Support replaying GPU hangs with captured context image - Increase FLR timeout from 3s to 9s - Enable w/a 16021333562 for DG2, MTL and ARL [guc] xe: - update MAINATINERS - New uapi adding OA functionality to Xe - expose l3 bank mask - fix display detect on ADL-N - runtime PM Fixes - Fix silent backmerge issues - More prep for SR-IOV - HWmon additions - per client usage info - Rework GPU page fault handling - Drop EXEC_QUEUE_FLAG_BANNED - Add BMG PCI IDs - Scheduler fixes and improvements - Rename xe_exec_queue::compute to xe_exec_queue::lr - Use ttm_uncached for BO with NEEDS_UC flag - Rename xe perf layer as xe observation layer - lots of refactoring radeon: - Backlight workaround for iMac - Silence UBSAN flex array warnings msm: - Validate registers XML description against schema in CI - core/dpu: SM7150 support - mdp5: Add support for MSM8937 - gpu: Add param for userspace to know if raytracing is supported - gpu: X185 support (aka gpu in X1 laptop chips) - gpu: a505 support ivpu: - hardware scheduler support - profiling support - improvements to the platform support layer - firmware handling improvements - clocks/power mgmt improvements - scheduler/logging improvements habanalabs: - Gradual sleep in polling memory macro - Reduce Gaudi2 MSI-X interrupt count to 128 - Add Gaudi2-D revision support - Add timestamp to CPLD info - Gaudi2: Assume hard-reset by firmware upon MC SEI severe error - Align Gaudi2 interrupt names - Check for errors after preboot is ready - Change habanalabs maintainer and git repo path mgag200: - refactoring and improvements - Add BMC output - enable polling nouveau: - add registry command line v3d: - perf counters improvements zynqmp: - irq and debugfs improvements atmel-hlcdc: - Support XLCDC in sam9x7 mipi-dbi: - Remove mipi_dbi_machine_little_endian - make SPI bits per word configurable - support RGB888 - allow pixel formats to be specified in the DT sun4i: - Rework the blender setup for DE2 panfrost: - Enable MT8188 support vc4: - Monochrome TV support exynos: - fix fallback mode regression - fix memory leak - Use drm_edid_duplicate() instead of kmemdup() etnaviv: - fix i.MX8MP NPU clock gating - workaround FE register cdc issues on some cores - fix DMA sync handling for cached buffers - fix job timeout handling - keep TS enabled on MMUv2 cores for improved performance mediatek: - Convert to platform remove callback returning void- - Drop chain_mode_fixup call in mode_valid() - Fixes the errors of MediaTek display driver found by IGT - Add display support for the MT8365-EVK board - Fix bit depth overwritten for mtk_ovl_set bit_depth() - Fix possible_crtcs calculation - Fix spurious kfree() ast: - refactor mode setting code stm: - Add LVDS support - DSI PHY updates" * tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits) drm/amdgpu/mes12: add missing opcode string drm/amdgpu/mes11: update opcode strings Revert "drm/amd/display: Reset freesync config before update new state" drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB drm/xe: Drop trace_xe_hw_fence_free drm/xe/uapi: Rename xe perf layer as xe observation layer drm/amdgpu: remove exp hw support check for gfx12 drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed drm/amdgpu: flush all cached ras bad pages to eeprom drm/amdgpu: select compute ME engines dynamically drm/amd/display: Allow display DCC for DCN401 drm/amdgpu: select compute ME engines dynamically drm/amdgpu/job: Replace DRM_INFO/ERROR logging drm/amdgpu: select compute ME engines dynamically drm/amd/pm: Ignore initial value in smu response register drm/amdgpu: Initialize VF partition mode drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping MAINTAINERS: fix Xinhui's name MAINTAINERS: update powerplay and swsmu drm/qxl: Pin buffer objects for internal mappings ...

drm/bridge: adv7511: Fix Intermittent EDID failures

2024-07-08T13:03:11+00:00

In the process of adding support for shared IRQ pins, a scenario was accidentally created where adv7511_irq_process returned prematurely causing the EDID to fail randomly. Since the interrupt handler is broken up into two main helper functions, update both of them to treat the helper functions as IRQ handlers. These IRQ routines process their respective tasks as before, but if they determine that actual work was done, mark the respective IRQ status accordingly, and delay the check until everything has been processed. This should guarantee the helper functions don't return prematurely while still returning proper values of either IRQ_HANDLED or IRQ_NONE. Reported-by: Liu Ying Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins") Signed-off-by: Adam Ford Tested-by: Liu Ying # i.MX8MP EVK ADV7535 EDID retrieval w/o IRQ Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240630221931.1650565-1-aford173@gmail.com Signed-off-by: Dmitry Baryshkov V3: Remove unnecessary declaration of ret by evaluating the return code of regmap_read directly. V2: Fix uninitialized cec_status Cut back a little on error handling to return either IRQ_NONE or IRQ_HANDLED.

Merge v6.10-rc6 into drm-next

2024-07-05T08:47:28+00:00

The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter

drm/bridge: analogix_dp: handle AUX transfer timeouts

2024-06-27T09:52:19+00:00

Timeouts on the AUX bus are to be expected in certain normal operating conditions. There is no need to raise an error log or re-initialize the whole AUX state machine. Simply acknowledge the AUX_ERR interrupt and let upper layers know about the timeout. Signed-off-by: Lucas Stach Reviewed-by: Robert Foss Tested-by: Heiko Stuebner Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-14-l.stach@pengutronix.de

drm/bridge: analogix_dp: only read AUX status when an error occured

2024-06-27T09:52:18+00:00

All AUX error responses raise the AUX_ERR interrupt, so there is no need to read the AUX status register in normal operation. Only read the status when an error occurred and we can expect a different status than OK. Signed-off-by: Lucas Stach Reviewed-by: Robert Foss Tested-by: Heiko Stuebner Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-13-l.stach@pengutronix.de

drm/bridge: analogix_dp: simplify and correct PLL lock checks

2024-06-27T09:52:16+00:00

Move the wait loop into its own function, so it doesn't need to be replicated in multiple locations. Also move the PLL lock checks between setting the link bandwidth, which may cause the PLL to unlock, and the MACRO_RST which needs the PLL to be locked. Signed-off-by: Lucas Stach Reviewed-by: Robert Foss Tested-by: Heiko Stuebner Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-12-l.stach@pengutronix.de

drm/bridge: analogix_dp: don't wait for PLL lock too early

2024-06-27T09:52:14+00:00

The PLL will be reconfigured later, which may cause it to go out of lock anyway, so there is no point in waiting for the PLL to lock here. Instead we can continue execution of the link setup, which will properly set the PLL parameters and will wait for the PLL to lock at the appropriate times. Signed-off-by: Lucas Stach Reviewed-by: Robert Foss Tested-by: Heiko Stuebner Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240619182200.3752465-11-l.stach@pengutronix.de