kernel/linux.git/drivers/gpu/drm/bridge, branch v6.1.168

drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output

2026-03-25T10:03:16+00:00

[ Upstream commit d0d727746944096a6681dc6adb5f123fc5aa018d ] Dual LVDS output (available on the SN65DSI84) requires HSYNC_PULSE_WIDTH and HORIZONTAL_BACK_PORCH to be divided by two with respect to the values used for single LVDS output. While not clearly stated in the datasheet, this is needed according to the DSI Tuner [0] output. It also makes sense intuitively because in dual LVDS output two pixels at a time are output and so the output clock is half of the pixel clock. Some dual-LVDS panels refuse to show any picture without this fix. Divide by two HORIZONTAL_FRONT_PORCH too, even though this register is used only for test pattern generation which is not currently implemented by this driver. [0] https://www.ti.com/tool/DSI-TUNER Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Cc: stable@vger.kernel.org Reviewed-by: Marek Vasut Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-2-2e15f5a9a6a0@bootlin.com Signed-off-by: Luca Ceresoli [ adapted variable declaration placement ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/bridge: ti-sn65dsi86: Add support for DisplayPort mode with HPD

2026-03-25T10:03:11+00:00

commit 9133bc3f0564890218cbba6cc7e81ebc0841a6f1 upstream. Add support for DisplayPort to the bridge, which entails the following: - Get and use an interrupt for HPD; - Properly clear all status bits in the interrupt handler; Signed-off-by: John Ripple Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20250915174543.2564994-1-john.ripple@keysight.com Signed-off-by: Greg Kroah-Hartman

drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding

2026-03-25T10:03:09+00:00

commit 2f22702dc0fee06a240404e0f7ead5b789b253d8 upstream. The DSI frequency must be in the range: (CHA_DSI_CLK_RANGE * 5 MHz) <= DSI freq < ((CHA_DSI_CLK_RANGE + 1) * 5 MHz) So the register value should point to the lower range value, but DIV_ROUND_UP() rounds the division to the higher range value, resulting in an excess of 1 (unless the frequency is an exact multiple of 5 MHz). For example for a 437100000 MHz clock CHA_DSI_CLK_RANGE should be 87 (0x57): (87 * 5 = 435) <= 437.1 < (88 * 5 = 440) but current code returns 88 (0x58). Fix the computation by removing the DIV_ROUND_UP(). Fixes: ceb515ba29ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Cc: stable@vger.kernel.org Reviewed-by: Marek Vasut Link: https://patch.msgid.link/20260226-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v1-1-2e15f5a9a6a0@bootlin.com Signed-off-by: Luca Ceresoli Signed-off-by: Greg Kroah-Hartman

drm/bridge: ti-sn65dsi86: Enable HPD polling if IRQ is not used

2026-03-25T10:03:08+00:00

commit 0b87d51690dd5131cbe9fbd23746b037aab89815 upstream. Fallback to polling to detect hotplug events on systems without interrupts. On systems where the interrupt line of the bridge is not connected, the bridge cannot notify hotplug events. Only add the DRM_BRIDGE_OP_HPD flag if an interrupt has been registered otherwise remain in polling mode. Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type") Cc: stable@vger.kernel.org # 6.16: 9133bc3f0564: drm/bridge: ti-sn65dsi86: Add Signed-off-by: Franz Schnyder Reviewed-by: Douglas Anderson [dianders: Adjusted Fixes/stable line based on discussion] Signed-off-by: Douglas Anderson Link: https://patch.msgid.link/20260206123758.374555-1-fra.schnyder@gmail.com Signed-off-by: Greg Kroah-Hartman

drm/bridge: display-connector: don't set OP_DETECT for DisplayPorts

2025-12-06T21:12:19+00:00

[ Upstream commit cb640b2ca54617f4a9d4d6efd5ff2afd6be11f19 ] Detecting the monitor for DisplayPort targets is more complicated than just reading the HPD pin level: it requires reading the DPCD in order to check what kind of device is attached to the port and whether there is an actual display attached. In order to let DRM framework handle such configurations, disable DRM_BRIDGE_OP_DETECT for dp-connector devices, letting the actual DP driver perform detection. This still keeps DRM_BRIDGE_OP_HPD enabled, so it is valid for the bridge to report HPD events. Currently inside the kernel there are only two targets which list hpd-gpios for dp-connector devices: arm64/qcom/qcs6490-rb3gen2 and arm64/qcom/sa8295p-adp. Both should be fine with this change. Cc: Bjorn Andersson Cc: Konrad Dybcio Cc: linux-arm-msm@vger.kernel.org Acked-by: Laurent Pinchart Link: https://lore.kernel.org/r/20250802-dp-conn-no-detect-v1-1-2748c2b946da@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/bridge: lt9211: Drop check for last nibble of version register

2025-10-29T13:04:34+00:00

[ Upstream commit db74b04edce1bc86b9a5acc724c7ca06f427ab60 ] There is now a new LT9211 rev. U5, which reports chip ID 0x18 0x01 0xe4 . The previous LT9211 reported chip ID 0x18 0x01 0xe3 , which is what the driver checks for right now. Since there is a possibility there will be yet another revision of the LT9211 in the future, drop the last version nibble check to allow all future revisions of the chip to work with this driver. This fix makes LT9211 rev. U5 work with this driver. Fixes: 8ce4129e3de4 ("drm/bridge: lt9211: Add Lontium LT9211 bridge driver") Signed-off-by: Marek Vasut Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251011110017.12521-1-marek.vasut@mailbox.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm: bridge: cdns-mhdp8546: Fix missing mutex unlock on error path

2025-09-25T08:58:54+00:00

[ Upstream commit 288dac9fb6084330d968459c750c838fd06e10e6 ] Add missing mutex unlock before returning from the error path in cdns_mhdp_atomic_enable(). Fixes: 935a92a1c400 ("drm: bridge: cdns-mhdp8546: Fix possible null pointer dereference") Reported-by: Hulk Robot Signed-off-by: Qi Xi Reviewed-by: Luca Ceresoli Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20250904034447.665427-1-xiqi2@huawei.com Signed-off-by: Luca Ceresoli Signed-off-by: Sasha Levin

drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ

2025-09-25T08:58:53+00:00

[ Upstream commit a10f910c77f280327b481e77eab909934ec508f0 ] If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference. Signed-off-by: Loic Poulain Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20250709085438.56188-1-loic.poulain@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm/bridge: ti-sn65dsi86: fix REFCLK setting

2025-09-09T16:54:22+00:00

[ Upstream commit bdd5a14e660062114bdebaef9ad52adf04970a89 ] The bridge has three bootstrap pins which are sampled to determine the frequency of the external reference clock. The driver will also (over)write that setting. But it seems this is racy after the bridge is enabled. It was observed that although the driver write the correct value (by sniffing on the I2C bus), the register has the wrong value. The datasheet states that the GPIO lines have to be stable for at least 5us after asserting the EN signal. Thus, there seems to be some logic which samples the GPIO lines and this logic appears to overwrite the register value which was set by the driver. Waiting 20us after asserting the EN line resolves this issue. Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by: Michael Walle Reviewed-by: Douglas Anderson Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20250821122341.1257286-1-mwalle@kernel.org Signed-off-by: Sasha Levin

drm/bridge: ti-sn65dsi86: Remove extra semicolon in ti_sn_bridge_probe()

2025-08-15T10:04:47+00:00

[ Upstream commit 15a7ca747d9538c2ad8b0c81dd4c1261e0736c82 ] As reported by the kernel test robot, a recent patch introduced an unnecessary semicolon. Remove it. Fixes: 55e8ff842051 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202506301704.0SBj6ply-lkp@intel.com/ Reviewed-by: Devarsh Thakkar Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20250714130631.1.I1cfae3222e344a3b3c770d079ee6b6f7f3b5d636@changeid Signed-off-by: Sasha Levin