kernel/linux.git/drivers/gpu/drm/bridge, branch v5.4.292

drm: adv7511: Drop dsi single lane support

2025-01-09T12:23:37+00:00

commit 79d67c499c3f886202a40c5cb27e747e4fa4d738 upstream. As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Reported-by: Hien Huynh Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart Reviewed-by: Adam Ford Signed-off-by: Biju Das Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-4-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Greg Kroah-Hartman

drm/bridge: adv7511_audio: Update Audio InfoFrame properly

2025-01-09T12:23:34+00:00

[ Upstream commit 902806baf3c1e8383c1fe3ff0b6042b8cb5c2707 ] AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1 while updating Audio InfoFrame information and then set to 0 when done. Otherwise partially updated Audio InfoFrames could be sent out. Two cases where this rule were not followed are fixed: - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated before/after setting ADV7511_REG_AUDIO_INFOFRAME. - In audio_startup() use the correct register for clearing AUDIO_UPDATE bit. The problem with corrupted audio infoframes were discovered by letting a HDMI logic analyser check the output of ADV7535. Note that this patchs replaces writing REG_GC(1) with REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field GC_PP[3:0] and that field doesn't control audio infoframe and is read- only. My conclusion therefore was that the author if this code meant to clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning. Tested-by: Biju Das Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support") Signed-off-by: Stefan Ekenberg Reviewed-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin

drm: bridge: adv7511: Enable SPDIF DAI

2025-01-09T12:23:34+00:00

[ Upstream commit f7f436b99364a3904387eba613fc69853cc2f220 ] ADV7511 support I2S or SPDIF as audio input interfaces. This commit enable support for SPDIF. Signed-off-by: Bogdan Togorean Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20200413113513.86091-1-bogdan.togorean@analog.com Stable-dep-of: 902806baf3c1 ("drm/bridge: adv7511_audio: Update Audio InfoFrame properly") Signed-off-by: Sasha Levin

drm/bridge: analogix_dp: properly handle zero sized AUX transactions

2024-08-19T03:33:53+00:00

commit e82290a2e0e8ec5e836ecad1ca025021b3855c2d upstream. Address only transactions without any data are valid and should not be flagged as short transactions. Simply return the message size when no transaction errors occured. CC: stable@vger.kernel.org Signed-off-by: Lucas Stach Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20240318203925.2837689-1-l.stach@pengutronix.de Signed-off-by: Greg Kroah-Hartman

drm/bridge/panel: Fix runtime warning on panel bridge release

2024-07-05T07:08:17+00:00

[ Upstream commit ce62600c4dbee8d43b02277669dd91785a9b81d9 ] Device managed panel bridge wrappers are created by calling to drm_panel_bridge_add_typed() and registering a release handler for clean-up when the device gets unbound. Since the memory for this bridge is also managed and linked to the panel device, the release function should not try to free that memory. Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will fail in this case and emit a warning because the panel bridge resource is no longer on the device resources list (it has been removed from there before the call to release handlers). Fixes: 67022227ffb1 ("drm/bridge: Add a devm_ allocator for panel bridge.") Signed-off-by: Adam Miotk Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240610102739.139852-1-adam.miotk@arm.com Signed-off-by: Sasha Levin

drm/bridge: nxp-ptn3460: simplify some error checking

2024-02-23T07:24:52+00:00

commit 28d3d0696688154cc04983f343011d07bf0508e4 upstream. The i2c_master_send/recv() functions return negative error codes or they return "len" on success. So the error handling here can be written as just normal checks for "if (ret < 0) return ret;". No need to complicate things. Btw, in this code the "len" parameter can never be zero, but even if it were, then I feel like this would still be the best way to write it. Fixes: 914437992876 ("drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking") Suggested-by: Neil Armstrong Signed-off-by: Dan Carpenter Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/04242630-42d8-4920-8c67-24ac9db6b3c9@moroto.mountain Signed-off-by: Greg Kroah-Hartman

drm/bridge: nxp-ptn3460: fix i2c_master_send() error checking

2024-02-23T07:24:52+00:00

commit 914437992876838662c968cb416f832110fb1093 upstream. The i2c_master_send/recv() functions return negative error codes or the number of bytes that were able to be sent/received. This code has two problems. 1) Instead of checking if all the bytes were sent or received, it checks that at least one byte was sent or received. 2) If there was a partial send/receive then we should return a negative error code but this code returns success. Fixes: a9fe713d7d45 ("drm/bridge: Add PTN3460 bridge driver") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/0cdc2dce-ca89-451a-9774-1482ab2f4762@moroto.mountain Signed-off-by: Greg Kroah-Hartman

drm/bridge: tc358767: Fix return value on error case

2024-01-25T22:34:28+00:00

[ Upstream commit 32bd29b619638256c5b75fb021d6d9f12fc4a984 ] If the hpd_pin is invalid, the driver returns 'ret'. But 'ret' contains 0, instead of an error value. Return -EINVAL instead. Fixes: f25ee5017e4f ("drm/bridge: tc358767: add IRQ and HPD support") Acked-by: Maxime Ripard Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-4-c22b2444f5f5@ideasonboard.com Signed-off-by: Sasha Levin

drm: adv7511: Fix low refresh rate register for ADV7533/5

2023-09-23T08:59:45+00:00

[ Upstream commit d281eeaa4de2636ff0c8e6ae387bb07b50e5fcbb ] For ADV7533 and ADV7535 low refresh rate is selected using bits [3:2] of 0x4a main register. So depending on ADV model write 0xfb or 0x4a register. Fixes: 2437e7cd88e8 ("drm/bridge: adv7533: Initial support for ADV7533") Reviewed-by: Robert Foss Reviewed-by: Nuno Sa Signed-off-by: Bogdan Togorean Signed-off-by: Alexandru Ardelean Reviewed-by: Frieder Schrempf Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro Signed-off-by: Sasha Levin

drm/bridge: tc358764: Fix debug print parameter order

2023-09-23T08:59:43+00:00

[ Upstream commit 7f947be02aab5b154427cb5b0fffe858fc387b02 ] The debug print parameters were swapped in the output and they were printed as decimal values, both the hardware address and the value. Update the debug print to print the parameters in correct order, and use hexadecimal print for both address and value. Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver") Signed-off-by: Marek Vasut Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20230615152817.359420-1-marex@denx.de Signed-off-by: Sasha Levin