kernel/linux.git/drivers/gpu/drm/bridge, branch v5.10.45

drm: bridge/panel: Cleanup connector on bridge detach

2021-05-14T07:50:01+00:00

commit 4d906839d321c2efbf3fed4bc31ffd9ff55b75c0 upstream. If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.") Cc: # 4.12+ Cc: Andrzej Hajda Cc: Neil Armstrong Cc: Laurent Pinchart Cc: Jonas Karlman Cc: Jernej Skrabec Signed-off-by: Paul Cercueil Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20210327115742.18986-2-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman

drm: bridge: fix LONTIUM use of mipi_dsi_() functions

2021-05-14T07:49:56+00:00

commit ad085b3a712a89e4a48472121b231add7a8362e4 upstream. The Lontium DRM bridge drivers use mipi_dsi_() function interfaces so they need to select DRM_MIPI_DSI to prevent build errors. ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! WARNING: modpost: suppressed 5 unresolved symbol warnings because there were too many) Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge") Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Reported-by: kernel test robot Signed-off-by: Randy Dunlap Reviewed-by: Adren Grassein Cc: Dmitry Baryshkov Cc: Sam Ravnborg Cc: Vinod Koul Cc: Bjorn Andersson Cc: Srinivas Kandagatla Cc: Adrien Grassein Cc: Andrzej Hajda Cc: Neil Armstrong Cc: Robert Foss Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210415183639.1487-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman

drm/bridge: sii902x: Enable I/O and core VCC supplies if present

2021-01-19T17:27:19+00:00

commit cc5f7e2fcbe396f2f461cd67c872af771a334bca upstream. On the SII9022, the IOVCC and CVCC12 supplies must reach the correct voltage before the reset sequence is initiated. On most boards, this assumption is true at boot-up, so initialization succeeds. However, when we try to initialize the chip with incorrect supply voltages, it will not respond to I2C requests. sii902x_probe() fails with -ENXIO. To resolve this, look for the "iovcc" and "cvcc12" regulators, and make sure they are enabled before starting the reset sequence. If these supplies are not available in devicetree, then they will default to dummy-regulator. In that case everything will work like before. This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode. On this board, the supplies would be set by the second stage bootloader, which does not run in falcon mode. Signed-off-by: Alexandru Gagniuc Signed-off-by: Sam Ravnborg [Fix checkpatch warnings] Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-2-mr.nuke.me@gmail.com Signed-off-by: Greg Kroah-Hartman

drm/bridge: sii902x: Refactor init code into separate function

2021-01-19T17:27:18+00:00

commit 91b5e26731c5d409d6134603afc061617639933e upstream. Separate the hardware initialization code from setting up the data structures and parsing the device tree. The purpose of this change is to provide a single exit point and avoid a waterfall of 'goto's in the subsequent patch. Signed-off-by: Alexandru Gagniuc Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-1-mr.nuke.me@gmail.com Signed-off-by: Greg Kroah-Hartman

drm/bridge: tpd12s015: Fix irq registering in tpd12s015_probe

2020-12-30T10:53:02+00:00

[ Upstream commit c2530cc9610d84a5a0118ba40d0f09309605047f ] gpiod_to_irq() return negative value in case of error, the existing code doesn't handle negative error codes. If the HPD gpio supports IRQs (gpiod_to_irq returns a valid number), we use the IRQ. If it doesn't (gpiod_to_irq returns an error), it gets polled via detect(). Fixes: cff5e6f7e83f ("drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter") Signed-off-by: YueHaibing Reviewed-by: Laurent Pinchart Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201102143024.26216-1-yuehaibing@huawei.com Signed-off-by: Sasha Levin

drm: bridge: dw-hdmi: Avoid resetting force in the detect function

2020-11-12T21:21:00+00:00

It has been observed that resetting force in the detect function can result in the PHY being powered down in response to hot-plug detect being asserted, even when the HDMI connector is forced on. Enabling debug messages and adding a call to dump_stack() in dw_hdmi_phy_power_off() shows the following in dmesg: [ 160.637413] dwhdmi-rockchip ff940000.hdmi: EVENT=plugin [ 160.637433] dwhdmi-rockchip ff940000.hdmi: PHY powered down in 0 iterations Call trace: dw_hdmi_phy_power_off dw_hdmi_phy_disable dw_hdmi_update_power dw_hdmi_detect dw_hdmi_connector_detect drm_helper_probe_detect_ctx drm_helper_hpd_irq_event dw_hdmi_irq irq_thread_fn irq_thread kthread ret_from_fork Fixes: 381f05a7a842 ("drm: bridge/dw_hdmi: add connector mode forcing") Signed-off-by: Jonathan Liu Reviewed-by: Sam Ravnborg Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201031081747.372599-1-net147@gmail.com

drm: bridge: cdns: Kconfig: Switch over dependency to ARCH_K3

2020-11-08T10:05:35+00:00

With the integration of chip-id detection scheme in kernel[1], there is no specific need to maintain multitudes of SoC specific config options, discussed as per [2], we have deprecated the usage in other places for v5.10-rc1. Fix the missing user so that we can clean up the configs in v5.11. [1] drivers/soc/ti/k3-socinfo.c commit 907a2b7e2fc7 ("soc: ti: add k3 platforms chipid module driver") [2] https://lore.kernel.org/linux-arm-kernel/20200908112534.t5bgrjf7y3a6l2ss@akan/ Fixes: afba7e6c5fc1 ("drm: bridge: cdns-mhdp8546: Add TI J721E wrapper") Cc: Swapnil Jakhade Cc: Tomi Valkeinen Cc: Laurent Pinchart Cc: Yuti Amonkar Cc: Jyri Sarha Signed-off-by: Nishanth Menon Reviewed-by: Tomi Valkeinen Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201026165441.22894-1-nm@ti.com

drm: bridge: cdns-mhdp8546: fix compile warning

2020-10-01T10:49:22+00:00

On x64 we get: drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:751:10: warning: conversion from 'long unsigned int' to 'unsigned int' changes value from '18446744073709551613' to '4294967293' [-Woverflow] The registers are 32 bit, so fix by casting to u32. Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge") Signed-off-by: Tomi Valkeinen Reported-by: Stephen Rothwell Reviewed-by: Swapnil Jakhade Acked-by: Laurent Pinchart Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20200929091918.24813-1-tomi.valkeinen@ti.com

Merge tag 'drm-misc-next-2020-09-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2020-09-22T23:52:24+00:00

drm-misc-next for 5.10: UAPI Changes: Cross-subsystem Changes: - virtio: Merged a PR for patches that will affect drm/virtio Core Changes: - dev: More devm_drm convertions and removal of drm_dev_init - atomic: Split out drm_atomic_helper_calc_timestamping_constants of drm_atomic_helper_update_legacy_modeset_state - ttm: More rework Driver Changes: - i915: selftests improvements - panfrost: support for Amlogic SoC - vc4: one fix - tree-wide: conversions to devm_drm_dev_alloc, - ast: simplifications of the atomic modesetting code - panfrost: multiple fixes - vc4: multiple fixes Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20200921152956.2gxnsdgxmwhvjyut@gilmour.lan

Merge tag 'cdns-mhdp-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next

2020-09-22T23:02:03+00:00

Cadence MHDP8546 DisplayPort bridge driver Signed-off-by: Dave Airlie From: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/5dd15e3c-51ed-49c0-cf49-88c7af38d6b0@ti.com