kernel/linux.git/drivers/gpu/drm/bridge, branch v5.10.185

drm/bridge: adv7533: Fix adv7533_mode_valid for adv7533 and adv7535

2023-05-17T09:47:41+00:00

[ Upstream commit ee0285e13455fdbce5de315bdbe91b5f198a2a06 ] When dynamically switching lanes was removed, the intent of the code was to check to make sure that higher speed items used 4 lanes, but it had the unintended consequence of removing the slower speeds for 4-lane users. This attempts to remedy this by doing a check to see that the max frequency doesn't exceed the chip limit, and a second check to make sure that the max bit-rate doesn't exceed the number of lanes * max bit rate / lane. Fixes: 9a0cdcd6649b ("drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge") Reviewed-by: Robert Foss Signed-off-by: Adam Ford Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20230319125524.58803-1-aford173@gmail.com Signed-off-by: Sasha Levin

drm/bridge: lt9611: Fix PLL being unable to lock

2023-04-20T10:10:24+00:00

commit 2a9df204be0bbb896e087f00b9ee3fc559d5a608 upstream. This fixes PLL being unable to lock, and is derived from an equivalent downstream commit. Available LT9611 documentation does not list this register, neither does LT9611UXC (which is a different chip). This commit has been confirmed to fix HDMI output on DragonBoard 845c. Suggested-by: Amit Pundir Reviewed-by: Amit Pundir Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20221213150304.4189760-1-robert.foss@linaro.org Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

drm/bridge: lt9611: pass a pointer to the of node

2023-03-11T15:39:33+00:00

[ Upstream commit b0a7f8736789935f62d6df32d441cdf05a5c05d2 ] Pass a pointer to the OF node while registering lt9611 MIPI device. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-7-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin

drm/bridge: lt9611: fix clock calculation

2023-03-11T15:39:33+00:00

[ Upstream commit 2576eb26494eb0509dd9ceb0cd27771a7a5e3674 ] Instead of having several fixed values for the pcr register, calculate it before programming. This allows the bridge to support most of the display modes. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-6-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin

drm/bridge: lt9611: fix programming of video modes

2023-03-11T15:39:33+00:00

[ Upstream commit ad188aa47edaa033a270e1a3efae43836ff47569 ] Program the upper part of the hfront_porch into the proper register. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-5-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin

drm/bridge: lt9611: fix polarity programming

2023-03-11T15:39:33+00:00

[ Upstream commit 0b157efa384ea417304b1da284ee2f603c607fc3 ] Fix programming of hsync and vsync polarities Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-4-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin

drm/bridge: lt9611: fix HPD reenablement

2023-03-11T15:39:33+00:00

[ Upstream commit a7790f6bd38f3642b60ae3504a2c749135b89451 ] The driver will reset the bridge in the atomic_pre_enable(). However this will also drop the HPD interrupt state. Instead of resetting the bridge, properly wake it up. This fixes the HPD interrupt delivery after the disable/enable cycle. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-3-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin

drm/bridge: lt9611: fix sleep mode setup

2023-03-11T15:39:32+00:00

[ Upstream commit ae2d329f104b75a0a78dcaded29fe6283289cdf9 ] On atomic_post_disable the bridge goes to the low power state. However the code disables too much of the chip, so the HPD event is not being detected and delivered to the host. Reduce the power saving in order to get the HPD event. Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230118081658.2198520-2-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin

drm/bridge: megachips: Fix error handling in i2c_register_driver()

2023-03-11T15:39:30+00:00

[ Upstream commit 4ecff954c370b82bce45bdca2846c5c5563e8a8a ] A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is triggered with the following log given: [ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting... insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver() directly without checking its return value, if i2c_add_driver() failed, it returns without calling i2c_del_driver() on the previous i2c driver, resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed later. A simple call graph is shown as below: stdpxxxx_ge_b850v3_init() i2c_add_driver(&stdp4028_ge_b850v3_fw_driver) i2c_add_driver(&stdp2690_ge_b850v3_fw_driver) i2c_register_driver() driver_register() bus_add_driver() priv = kzalloc(...) # OOM happened # return without delete stdp4028_ge_b850v3_fw_driver Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when i2c_add_driver() returns error. Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Signed-off-by: Yuan Can Reviewed-by: Andrzej Hajda Tested-by: Ian Ray Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com Signed-off-by: Sasha Levin

drm/bridge: adv7533: remove dynamic lane switching from adv7533 bridge

2023-01-14T09:15:23+00:00

[ Upstream commit 9a0cdcd6649b76f0b7ceec0e55b0a718321e34d3 ] adv7533 bridge tries to dynamically switch lanes based on the mode by detaching and attaching the mipi dsi device. This approach is incorrect because this method of dynamic switch of detaching and attaching the mipi dsi device also results in removing and adding the component which is not necessary. This approach is also prone to deadlocks. So for example, on the db410c whenever this path is executed with lockdep enabled, this results in a deadlock due to below ordering of locks. -> #1 (crtc_ww_class_acquire){+.+.}-{0:0}: lock_acquire+0x6c/0x90 drm_modeset_acquire_init+0xf4/0x150 drmm_mode_config_init+0x220/0x770 msm_drm_bind+0x13c/0x654 try_to_bring_up_aggregate_device+0x164/0x1d0 __component_add+0xa8/0x174 component_add+0x18/0x2c dsi_dev_attach+0x24/0x30 dsi_host_attach+0x98/0x14c devm_mipi_dsi_attach+0x38/0xb0 adv7533_attach_dsi+0x8c/0x110 adv7511_probe+0x5a0/0x930 i2c_device_probe+0x30c/0x350 really_probe.part.0+0x9c/0x2b0 __driver_probe_device+0x98/0x144 driver_probe_device+0xac/0x14c __device_attach_driver+0xbc/0x124 bus_for_each_drv+0x78/0xd0 __device_attach+0xa8/0x1c0 device_initial_probe+0x18/0x24 bus_probe_device+0xa0/0xac deferred_probe_work_func+0x90/0xd0 process_one_work+0x28c/0x6b0 worker_thread+0x240/0x444 kthread+0x110/0x114 ret_from_fork+0x10/0x20 -> #0 (component_mutex){+.+.}-{3:3}: __lock_acquire+0x1280/0x20ac lock_acquire.part.0+0xe0/0x230 lock_acquire+0x6c/0x90 __mutex_lock+0x84/0x400 mutex_lock_nested+0x3c/0x70 component_del+0x34/0x170 dsi_dev_detach+0x24/0x30 dsi_host_detach+0x20/0x64 mipi_dsi_detach+0x2c/0x40 adv7533_mode_set+0x64/0x90 adv7511_bridge_mode_set+0x210/0x214 drm_bridge_chain_mode_set+0x5c/0x84 crtc_set_mode+0x18c/0x1dc drm_atomic_helper_commit_modeset_disables+0x40/0x50 msm_atomic_commit_tail+0x1d0/0x6e0 commit_tail+0xa4/0x180 drm_atomic_helper_commit+0x178/0x3b0 drm_atomic_commit+0xa4/0xe0 drm_client_modeset_commit_atomic+0x228/0x284 drm_client_modeset_commit_locked+0x64/0x1d0 drm_client_modeset_commit+0x34/0x60 drm_fb_helper_lastclose+0x74/0xcc drm_lastclose+0x3c/0x80 drm_release+0xfc/0x114 __fput+0x70/0x224 ____fput+0x14/0x20 task_work_run+0x88/0x1a0 do_exit+0x350/0xa50 do_group_exit+0x38/0xa4 __wake_up_parent+0x0/0x34 invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0x60/0x11c do_el0_svc+0x30/0xc0 el0_svc+0x58/0x100 el0t_64_sync_handler+0x1b0/0x1bc el0t_64_sync+0x18c/0x190 Due to above reasons, remove the dynamic lane switching code from adv7533 bridge chip and filter out the modes which would need different number of lanes as compared to the initialization time using the mode_valid callback. This can be potentially re-introduced by using the pre_enable() callback but this needs to be evaluated first whether such an approach will work so this will be done with a separate change. changes since RFC: - Fix commit text and add TODO comment changes in v2: - Fix checkpatch formatting errors Fixes: 62b2f026cd8e ("drm/bridge: adv7533: Change number of DSI lanes dynamically") Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/16 Suggested-by: Dmitry Baryshkov Signed-off-by: Abhinav Kumar Reviewed-by: Robert Foss Link: https://lore.kernel.org/r/1661797363-7564-1-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/1665522649-3423-1-git-send-email-quic_abhinavk@quicinc.com Signed-off-by: Sasha Levin