kernel/linux.git/drivers/gpu/drm/bridge/synopsys, branch v5.16.18

drm/bridge: dw-hdmi: handle ELD when DRM_BRIDGE_ATTACH_NO_CONNECTOR

2022-01-27T11:02:13+00:00

[ Upstream commit 3f2532d65a571ca02258b547b5b68ab2e9406fdb ] The current ELD handling takes the internal connector ELD buffer and shares it to the I2S and AHB sub-driver. But with DRM_BRIDGE_ATTACH_NO_CONNECTOR, the connector is created elsewhere (or not), and an eventual connector is known only if the bridge chain up to a connector is enabled. The current dw-hdmi code gets the current connector from atomic_enable() so use the already stored connector pointer and replace the buffer pointer with a callback returning the current connector ELD buffer. Since a connector is not always available, either pass an empty ELD to the alsa HDMI driver or don't call snd_pcm_hw_constraint_eld() in AHB driver. Reported-by: Martin Blumenstingl Signed-off-by: Neil Armstrong [narmstrong: fixed typo in commit log] Acked-by: Jernej Skrabec Link: https://patchwork.freedesktop.org/patch/msgid/20211029135947.3022875-1-narmstrong@baylibre.com Signed-off-by: Sasha Levin

drm/bridge: dw-hdmi-cec: Make use of the helper function devm_add_action_or_reset()

2021-10-06T09:21:46+00:00

The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing Reviewed-by: Laurent Pinchart Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210922125909.215-1-caihuoqing@baidu.com

Merge tag 'drm-misc-next-2021-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2021-07-30T04:52:00+00:00

drm-misc-next for v5.15: UAPI Changes: - Add modifiers for arm fixed rate compression. Cross-subsystem Changes: - Assorted dt binding fixes. - Convert ssd1307fb to json-schema. - Update a lot of irc channels to point to OFTC, as everyone moved there. - Fix the same divide by zero for asilantfb, kyro, rivafb. Core Changes: - Document requirements for new atomic properties. - Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers. - Document drm_property_enum.value for bitfields. - Add explicit _NO_ for MIPI_DSI flags that disable features. - Assorted documentation fixes. - Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core. - Add logging and docs to RMFB ioctl. - Assorted small fixes to dp_mst, master handling. - Clarify drm lease usage. Driver Changes: - Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4. - More drm -> linux irq conversions. - Add support for some Logic Technologies and Multi-Inno panels. - Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem. - Add support for 2 AUO panels. - Add damage handling to ssd1307fb. - Improve FIFO handling on mxsfb. - Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls. - Improve sony acx424akp backlight handling. Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com

drm: bridge: dw-hdmi: Attach to next bridge if available

2021-07-28T13:33:13+00:00

On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings require a video output port connected to an HDMI sink (most likely an HDMI connector, in rare cases another bridges converting HDMI to another protocol). For those platforms, retrieve the next bridge and attach it from the dw-hdmi bridge attach handler. Signed-off-by: Laurent Pinchart Reviewed-by: Neil Armstrong Tested-by: Kieran Bingham # On V3U Reviewed-by: Kieran Bingham

drm/bridge: Centralize error message when bridge attach fails

2021-07-28T13:33:12+00:00

Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd Signed-off-by: Laurent Pinchart Reviewed-by: Tomi Valkeinen Reviewed-by: Jyri Sarha

drm/bridge: dw-mipi-dsi: Find the possible DSI devices

2021-07-27T09:59:33+00:00

Finding panel_or_bridge might vary based on associated DSI devices like DSI panel, bridge, and I2C based DSI bridge. 1. DSI panels and bridges will invoke the host attach from probe in order to find the panel_or_bridge. chipone_probe() dw_mipi_dsi_host_attach().start dw_mipi_dsi_panel_or_bridge() ...found the panel_or_bridge... ltdc_encoder_init().start dw_mipi_dsi_bridge_attach().start dw_mipi_dsi_host_attach().start chipone_attach(). start chipone_attach(). done dw_mipi_dsi_host_attach().done dw_mipi_dsi_bridge_attach(). done ltdc_encoder_init().done 2. I2C based DSI bridge will invoke the drm_bridge_attach from bridge attach in order to find the panel_or_bridge. ltdc_encoder_init().start dw_mipi_dsi_bridge_attach().start dw_mipi_dsi_panel_or_bridge() ...found the panel_or_bridge... dw_mipi_dsi_host_attach().start sn65dsi83_attach(). start sn65dsi83_attach(). done dw_mipi_dsi_host_attach().done dw_mipi_dsi_bridge_attach(). done ltdc_encoder_init().done So, invoke the panel_or_bridge from host attach and bridge attach in order to find all possible DSI devices. Signed-off-by: Jagan Teki Tested-by: Yannick Fertre Reviewed-by: Robert Foss Tested-by: Heiko Stuebner Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210704140309.268469-1-jagan@amarulasolutions.com

drm/connector: Add helper to compare HDR metadata

2021-05-07T15:13:09+00:00

All the drivers that support the HDR metadata property have a similar function to compare the metadata from one connector state to the next, and force a mode change if they differ. All these functions run pretty much the same code, so let's turn it into an helper that can be shared across those drivers. Reviewed-by: Harry Wentland Reviewed-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-2-maxime@cerno.tech

drm/connector: Create a helper to attach the hdr_output_metadata property

2021-05-07T15:13:04+00:00

All the drivers that implement HDR output call pretty much the same function to initialise the hdr_output_metadata property, and while the creation of that property is in a helper, every driver uses the same code to attach it. Provide a helper for it as well Reviewed-by: Harry Wentland Reviewed-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-1-maxime@cerno.tech

drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver

2021-04-20T15:22:38+00:00

This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver. On some SoCs, the CEC functionality is enabled in the IP config bits, but the CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set but the DW-HDMI CEC signal is not connected to a physical pin, leading to some confusion when the DW-HDMI CEC controller can't communicate on the bus. Reviewed-by: Neil Armstrong Signed-off-by: Jernej Skrabec Signed-off-by: Neil Armstrong Acked-by: Hans Verkuil Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com

drm: bridge: dw-hdmi: Remove redundant null check before clk_disable_unprepare

2021-01-05T05:20:41+00:00

Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove them. Signed-off-by: Xu Wang Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart