kernel/linux.git/drivers/gpu/drm/bridge/synopsys, branch v5.16.1

drm/bridge: dw-hdmi-cec: Make use of the helper function devm_add_action_or_reset()

2021-10-06T09:21:46+00:00

The helper function devm_add_action_or_reset() will internally call devm_add_action(), and if devm_add_action() fails then it will execute the action mentioned and return the error code. So use devm_add_action_or_reset() instead of devm_add_action() to simplify the error handling, reduce the code. Signed-off-by: Cai Huoqing Reviewed-by: Laurent Pinchart Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210922125909.215-1-caihuoqing@baidu.com

Merge tag 'drm-misc-next-2021-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2021-07-30T04:52:00+00:00

drm-misc-next for v5.15: UAPI Changes: - Add modifiers for arm fixed rate compression. Cross-subsystem Changes: - Assorted dt binding fixes. - Convert ssd1307fb to json-schema. - Update a lot of irc channels to point to OFTC, as everyone moved there. - Fix the same divide by zero for asilantfb, kyro, rivafb. Core Changes: - Document requirements for new atomic properties. - Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers. - Document drm_property_enum.value for bitfields. - Add explicit _NO_ for MIPI_DSI flags that disable features. - Assorted documentation fixes. - Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core. - Add logging and docs to RMFB ioctl. - Assorted small fixes to dp_mst, master handling. - Clarify drm lease usage. Driver Changes: - Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4. - More drm -> linux irq conversions. - Add support for some Logic Technologies and Multi-Inno panels. - Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem. - Add support for 2 AUO panels. - Add damage handling to ssd1307fb. - Improve FIFO handling on mxsfb. - Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls. - Improve sony acx424akp backlight handling. Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com

drm: bridge: dw-hdmi: Attach to next bridge if available

2021-07-28T13:33:13+00:00

On all platforms except i.MX and Rockchip, the dw-hdmi DT bindings require a video output port connected to an HDMI sink (most likely an HDMI connector, in rare cases another bridges converting HDMI to another protocol). For those platforms, retrieve the next bridge and attach it from the dw-hdmi bridge attach handler. Signed-off-by: Laurent Pinchart Reviewed-by: Neil Armstrong Tested-by: Kieran Bingham # On V3U Reviewed-by: Kieran Bingham

drm/bridge: Centralize error message when bridge attach fails

2021-07-28T13:33:12+00:00

Being informed of a failure to attach a bridge is useful, and many drivers prints an error message in that case. Move the message to drm_bridge_attach() to avoid code duplication. Suggested-by: Stephen Boyd Signed-off-by: Laurent Pinchart Reviewed-by: Tomi Valkeinen Reviewed-by: Jyri Sarha

drm/bridge: dw-mipi-dsi: Find the possible DSI devices

2021-07-27T09:59:33+00:00

Finding panel_or_bridge might vary based on associated DSI devices like DSI panel, bridge, and I2C based DSI bridge. 1. DSI panels and bridges will invoke the host attach from probe in order to find the panel_or_bridge. chipone_probe() dw_mipi_dsi_host_attach().start dw_mipi_dsi_panel_or_bridge() ...found the panel_or_bridge... ltdc_encoder_init().start dw_mipi_dsi_bridge_attach().start dw_mipi_dsi_host_attach().start chipone_attach(). start chipone_attach(). done dw_mipi_dsi_host_attach().done dw_mipi_dsi_bridge_attach(). done ltdc_encoder_init().done 2. I2C based DSI bridge will invoke the drm_bridge_attach from bridge attach in order to find the panel_or_bridge. ltdc_encoder_init().start dw_mipi_dsi_bridge_attach().start dw_mipi_dsi_panel_or_bridge() ...found the panel_or_bridge... dw_mipi_dsi_host_attach().start sn65dsi83_attach(). start sn65dsi83_attach(). done dw_mipi_dsi_host_attach().done dw_mipi_dsi_bridge_attach(). done ltdc_encoder_init().done So, invoke the panel_or_bridge from host attach and bridge attach in order to find all possible DSI devices. Signed-off-by: Jagan Teki Tested-by: Yannick Fertre Reviewed-by: Robert Foss Tested-by: Heiko Stuebner Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210704140309.268469-1-jagan@amarulasolutions.com

drm/connector: Add helper to compare HDR metadata

2021-05-07T15:13:09+00:00

All the drivers that support the HDR metadata property have a similar function to compare the metadata from one connector state to the next, and force a mode change if they differ. All these functions run pretty much the same code, so let's turn it into an helper that can be shared across those drivers. Reviewed-by: Harry Wentland Reviewed-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-2-maxime@cerno.tech

drm/connector: Create a helper to attach the hdr_output_metadata property

2021-05-07T15:13:04+00:00

All the drivers that implement HDR output call pretty much the same function to initialise the hdr_output_metadata property, and while the creation of that property is in a helper, every driver uses the same code to attach it. Provide a helper for it as well Reviewed-by: Harry Wentland Reviewed-by: Jernej Skrabec Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210430094451.2145002-1-maxime@cerno.tech

drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driver

2021-04-20T15:22:38+00:00

This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver. On some SoCs, the CEC functionality is enabled in the IP config bits, but the CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set but the DW-HDMI CEC signal is not connected to a physical pin, leading to some confusion when the DW-HDMI CEC controller can't communicate on the bus. Reviewed-by: Neil Armstrong Signed-off-by: Jernej Skrabec Signed-off-by: Neil Armstrong Acked-by: Hans Verkuil Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com

drm: bridge: dw-hdmi: Remove redundant null check before clk_disable_unprepare

2021-01-05T05:20:41+00:00

Because clk_disable_unprepare() already checked NULL clock parameter, so the additional check is unnecessary, just remove them. Signed-off-by: Xu Wang Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart

Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm

2020-12-14T19:07:56+00:00

Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...