kernel/linux.git/drivers/gpu/drm/bridge/Makefile, branch v5.13.1

drm/bridge: Introduce LT8912B DSI to HDMI bridge

2021-03-26T14:40:20+00:00

Lontium LT8912B is a DSI to HDMI bridge. Reported-by: kernel test robot Signed-off-by: Adrien Grassein Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210326121955.1266230-3-adrien.grassein@gmail.com

drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge

2021-03-25T16:46:08+00:00

ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone. It has a flexible configuration of MIPI DSI signal input and produce RGB565, RGB666, RGB888 output format. Add bridge driver for it. Signed-off-by: Jagan Teki Reviewed-by: Robert Foss Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20210322103328.66442-2-jagan@amarulasolutions.com

drm: bridge: add support for lontium LT9611UXC bridge

2020-11-07T11:04:40+00:00

Add support for Lontium LT9611UXC HDMI bridge. Lontium LT9611UXC is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output. Despite name being similar to LT9611, these devices are different enough to warrant separate driver. Signed-off-by: Dmitry Baryshkov Reviewed-by: Sam Ravnborg Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20201102011435.1100930-3-dmitry.baryshkov@linaro.org

drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge

2020-09-18T12:16:01+00:00

Add a new DRM bridge driver for Cadence MHDP8546 DPTX IP used in TI J721E SoC. MHDP DPTX IP is the component that complies with VESA DisplayPort (DP) and embedded Display Port (eDP) standards. It integrates uCPU running the embedded Firmware (FW) interfaced over APB interface. Basically, it takes a DPI stream as input and outputs it encoded in DP format. Currently, it supports only SST mode. Co-developed-by: Tomi Valkeinen Co-developed-by: Jyri Sarha Signed-off-by: Tomi Valkeinen Signed-off-by: Jyri Sarha Signed-off-by: Quentin Schulz Signed-off-by: Yuti Amonkar Signed-off-by: Swapnil Jakhade Reviewed-by: Laurent Pinchart Signed-off-by: Tomi Valkeinen

drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridge

2020-08-12T20:06:18+00:00

Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived from tc358764 driver and panel-raspberrypi-touchscreen. This driver is meant to replace the panel-raspberrypi-touchscreen too, as the bridge connection can be described in DT too. Signed-off-by: Marek Vasut Cc: dri-devel@lists.freedesktop.org Cc: Eric Anholt Cc: Rob Herring Cc: Sam Ravnborg Cc: devicetree@vger.kernel.org Reviewed-by: Sam Ravnborg Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20200809105705.6334-2-marex@denx.de

display/drm/bridge: TC358775 DSI/LVDS driver

2020-08-10T17:46:06+00:00

This driver is tested with two panels individually with Apq8016-IFC6309 board https://www.inforcecomputing.com/products/single-board-computers-sbc/qualcomm-snapdragon-410-inforce-6309-micro-sbc 1. 1366x768@60 auo,b101xtn01 data-mapping = "jeida-24" 2. 800x480@60 innolux,at070tn92 data-mapping = "vesa-24" - power off sequence in proper order - put_unaligned_be16, put_unaligned_le32 macros used - static function for mode_valid - len initialized - MODE_CLOCK_HIGH handled properly - bus_formats handled in mode_valid - GENMASK and FIELD_PREP used - Kconfig proper indentation - error handling endpoint data-lanes - check for bus_formats unsupported - display_timings naming local variables - help modified - ~vsdelay dynamic value set based on the calculation of dsi speed, output speed, blanking - panel->connector_type removed - dual port implemented - devm_drm_panel_bridge_add method used instead of panel description modified - regulator enable and disable with proper orders and delays as per the spec - removed drm_connector_status - added bus_formats - mdelay to usleep_range - magic number to macros for CLRSI and mux registers description modified - replaced u32 instead of uint32_t - updated alphabetic order of headers - added SPDX identifier license Signed-off-by: Vinay Simha BN Reviewed-by: Sam Ravnborg Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/1594388491-15129-2-git-send-email-simhavcs@gmail.com

drm/bridge: Introduce LT9611 DSI to HDMI bridge

2020-07-26T14:55:49+00:00

Lontium Lt9611 is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output Co-developed-by: Bjorn Andersson Signed-off-by: Bjorn Andersson Co-developed-by: Srinivas Kandagatla Signed-off-by: Srinivas Kandagatla Tested-by: John Stultz Signed-off-by: Vinod Koul Signed-off-by: Sam Ravnborg # fix lt9611_bridge_mode_valid Link: https://patchwork.freedesktop.org/patch/msgid/20200723163442.1280414-4-vkoul@kernel.org

drm/bridge: chrontel-ch7033: Add a new driver

2020-05-05T07:48:56+00:00

This is a driver for video encoder with VGA and DVI/HDMI outputs. There is no documentation for the chip -- the operation was guessed from what was sniffed on a Dell Wyse 3020 ThinOS terminal, the register names come from the ch7035 driver in Mediatek's GPL code dump. Only bare minimum is implemented -- no fancy stuff, such as scaling. That would only worsen our misery. We don't load the firmware and we don't need to even bother enabling the MCU. There are probably no distributable firmware images anyway. Tested with a handful of monitors ranging from 1024x768@75 to 1400x1050@60, with VGA as well as DVI. Signed-off-by: Lubomir Rintel Acked-by: Sam Ravnborg Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20200424213539.93157-4-lkundrak@v3.sk

drm/bridge: Add NWL MIPI DSI host controller support

2020-04-09T13:52:47+00:00

This adds initial support for the NWL MIPI DSI Host controller found on i.MX8 SoCs. It adds support for the i.MX8MQ but the same IP can be found on e.g. the i.MX8QXP. It has been tested on the Librem 5 devkit using mxsfb. Signed-off-by: Guido Günther Co-developed-by: Robert Chiras Signed-off-by: Robert Chiras Tested-by: Robert Chiras Tested-by: Martin Kepplinger Reviewed-by: Fabio Estevam Signed-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/1cf5750f734e33d005564cd89c576eaf3c1c192b.1586427783.git.agx@sigxcpu.org

drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter

2020-02-26T11:31:38+00:00

The TI TPD12S015 is an HDMI level shifter and ESD protector controlled through GPIOs. Add a DRM bridge driver for the device. Signed-off-by: Laurent Pinchart Reviewed-by: Tomi Valkeinen Acked-by: Sam Ravnborg Tested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-17-laurent.pinchart@ideasonboard.com