kernel/linux.git/drivers/gpu/drm/bochs, branch v4.14.192

drm/bochs: downgrade pci_request_region failure from error to warning

2020-04-13T08:34:18+00:00

[ Upstream commit 8c34cd1a7f089dc03933289c5d4a4d1489549828 ] Shutdown of firmware framebuffer has a bunch of problems. Because of this the framebuffer region might still be reserved even after drm_fb_helper_remove_conflicting_pci_framebuffers() returned. Don't consider pci_request_region() failure for the framebuffer region as fatal error to workaround this issue. Reported-by: Marek Marczykowski-Górecki Signed-off-by: Gerd Hoffmann Acked-by: Sam Ravnborg Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.com Signed-off-by: Sasha Levin

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

drm/bochs: Use the drm_driver.dumb_destroy default

2017-08-16T18:18:55+00:00

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Gerd Hoffmann Signed-off-by: Noralf Trønnes Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/1502034068-51384-17-git-send-email-noralf@tronnes.org

drm/: Drop fbdev info flags

2017-07-26T11:22:40+00:00

- FBINFO_CAN_FORCE_OUTPUT has been a lie ever since we nerfed&removed the entire panic handling code in our fbdev emulation. We might restore kms panic output, but not through the bazillion of legacy code layers called fbdev/fbcon, there's just no way to make that work safely. - With the module check change FBINFO_DEFAULT is always 0, so can be removed too. That removes another change to cargo-cult stuff in kms drivers, yay! Reviewed-by: Sean Paul Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20170706125735.28299-5-daniel.vetter@ffwll.ch Signed-off-by: Daniel Vetter

drm/bochs: switch fb_ops over to use drm_fb_helper_cfb helpers

2017-07-03T08:31:14+00:00

The current drm_fb_helper_sys helpers referenced in fb_ops assume that the video memory is in system RAM. This is not the case for sparc which uses direct physical memory accesses for IO memory and causes the bochs_drm module to panic immediately upon startup as it tries to initialise the framebuffer. Switching fb_ops over to use the drm_fb_helper_cfb helpers ensures that the correct accesses are used on sparc, fixing the panic and allowing the bochs_drm module to function under qemu-system-sparc64. Signed-off-by: Mark Cave-Ayland Link: http://patchwork.freedesktop.org/patch/msgid/1499032363-8290-1-git-send-email-mark.cave-ayland@ilande.co.uk Signed-off-by: Gerd Hoffmann

drm/pci: Deprecate drm_pci_init/exit completely

2017-06-20T08:41:03+00:00

The magic switching between proper pci driver and shadow-attach isn't useful anymore since there's no ums+kms drivers left. Let's split this up properly, calling pci_register_driver for kms drivers and renaming the shadow-attach init to drm_legacy_pci_init/exit. Acked-by: Thierry Reding Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch

drm: Remove drm_driver->set_busid hook

2017-06-20T08:40:49+00:00

The only special-case is pci devices, and we can easily handle this in the core. Do so and drop a pile of boilerplate from drivers. Acked-by: Thierry Reding Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-5-daniel.vetter@ffwll.ch

drm/bochs: fix include notation and remove -Iinclude/drm flag

2017-05-16T15:18:23+00:00

Include instead of relative path from include/drm, then remove the -Iinclude/drm compiler flag. Signed-off-by: Masahiro Yamada Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-6-git-send-email-yamada.masahiro@socionext.com

drm/ttm: add io_mem_pfn callback

2017-04-05T03:33:42+00:00

This allows the driver to handle io_mem mappings on their own. Signed-off-by: Christian König Reviewed-by: Michel Dänzer Reviewed-by: Nicolai Hähnle Signed-off-by: Alex Deucher

drm: Add acquire ctx parameter to ->page_flip(_target)

2017-03-29T07:50:38+00:00

Again just going through the motions, no functional changes in here. Cc: Gerd Hoffmann Cc: Ben Skeggs Cc: Russell King Cc: Laurent Pinchart Cc: Eric Anholt Cc: Alex Deucher Cc: Christian König Reviewed-by: Harry Wentland Signed-off-by: Daniel Vetter t Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch