kernel/linux.git/drivers/gpu/drm/ast, branch linux-6.0.y

drm/ast: Enable primary plane with CRTC

2022-06-27T09:10:43+00:00

As the CRTC requires a primary plane for display, ensure that the primary plane is enabled with the CRTC. Use drm_atomic_helper_check_crtc_state(). Add all affected planes to the atomic state so that their state will be checked as well. Signed-off-by: Thomas Zimmermann Acked-by: Jocelyn Falempe Link: https://patchwork.freedesktop.org/patch/msgid/20220617103226.25617-4-tzimmermann@suse.de

drm/ast: Fix black screen when getting out of suspend

2022-06-27T08:15:02+00:00

With an AST2600, the screen is garbage when going out of suspend. This is because color settings are lost, and not restored on resume. Force the color settings on DPMS_ON, to make sure the settings are correct. I didn't write this code, it comes from the out-of-tree aspeed driver v1.13 https://www.aspeedtech.com/support_driver/ Signed-off-by: Jocelyn Falempe Tested-by: Venkat Tadikonda Reviewed-by: Lyude Paul Acked-by: Thomas Zimmermann Tested-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220622124815.356035-1-jfalempe@redhat.com

drm/ast: Fixed the casting issue reported by sparse

2022-06-24T07:37:32+00:00

V1: 1.Fixed sparse:cast truncates bits form constant value ()cast truncates bits from constant value (ffffffffffffff00 becomes 0) Reported-by: kernel test robot Signed-off-by: KuoHsiang Chou Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220623083116.35365-1-kuohsiang_chou@aspeedtech.com

drm: Drop drm_edid.h from drm_crtc.h

2022-06-20T20:53:55+00:00

drm_crtc.h has no need for drm_edid.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_edid.h. Quite a few placs do currently depend on drm_edid.h without actually including it directly. All of those need to be fixed up. v2: Fix up i915 and msm some more v3: Fix alphabetical ordering (Sam) Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20220614090245.30283-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg Acked-by: Jani Nikula

drm/ast: Support multiple outputs

2022-06-08T11:16:15+00:00

Systems with AST graphics can have multiple output; typically VGA plus some other port. Record detected output chips in a bitmask and initialize each output on its own. Assume a VGA output by default and use SIL164 and DP501 if available. For ASTDP assume that it can run in parallel with VGA. Tested on AST2100. v3: * define a macro for each BIT(ast_tx_chip) (Patrik) v2: * make VGA/SIL164/DP501 mutually exclusive Signed-off-by: Thomas Zimmermann Reviewed-by: Patrik Jakobsson Fixes: a59b026419f3 ("drm/ast: Initialize encoder and connector for VGA in helper function") Cc: Thomas Zimmermann Cc: Javier Martinez Canillas Cc: Dave Airlie Cc: dri-devel@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20220607092008.22123-2-tzimmermann@suse.de

drm: simplify the return expression of ast_drm_resume()

2022-05-05T07:18:54+00:00

Simplify the return expression. Reported-by: Zeal Robot Signed-off-by: Minghao Chi Acked-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220505022208.57157-1-chi.minghao@zte.com.cn

drm/ast: Protect concurrent access to I/O registers with lock

2022-05-05T07:18:32+00:00

Add a mutex lock to protect concurrent access to I/O registers against each other. This happens between invocation of commit- tail functions and get-mode operations. Both with use the CRTC index register AST_IO_CRTC_PORT. Concurrent access can lead to failed mode-setting operations. v2: * fix typo in commit description (Jocelyn) Signed-off-by: Thomas Zimmermann Reviewed-by: Jocelyn Falempe Acked-by: Daniel Vetter Reported-by: KuoHsiang Chou Link: https://patchwork.freedesktop.org/patch/msgid/20220502142514.2174-3-tzimmermann@suse.de

drm/ast: Create the driver for ASPEED proprietory Display-Port

2022-05-03T14:04:03+00:00

V1: 1. The MCU FW controling ASPEED DP is loaded by BMC boot loader. 2. Driver starts after CR[3:1] == 111b that indicates Tx is ASTDP, and CRD1[5] has been asserted by BMVC boot loader. 3. EDID is prioritized by DP monitor. 4. DP's EDID has high priority to decide resolution supporting. V2: Modules description: 1. ASTDP (ASPEED DisplayPort) is controlled by dedicated AST-MCU (ASPEED propriatary MCU). 2. MCU is looping in charged of HPD, Read EDID, Link Training with DP sink. 3. ASTDP and AST-MUC reside in BMC (Baseboard Management controller) addressing-space. 4. ASPEED DRM driver requests MCU to get HPD and EDID by CR-scratched register. Booting sequence: 1. Check if TX is ASTDP // ast_dp_launch() 2. Check if DP-MCU FW has loaded // ast_dp_launch() 3. Read EDID // ast_dp_read_edid() 4. Resolution switch // ast_dp_SetOutput() V3: 1. Remove unneeded semicolon. 2. Apply to git://anongit.freedesktop.org/drm/drm, instead of git://anongit.freedesktop.org/drm/drm-misc 3. Resolve auto build test WARNINGs on V1 patch. V4: 1. Sync code-base with kernel 5.17_rc6 2. Remove the define of DPControlPower, because DP chips need to be powered on to be used. 3. Remove the switches of PHY and Display from EDID procedure. 4. Revise increaing delay to fixed delay, because this version kernel doesn't detect minitor consistenntly. 5. Create clean-up code used for reset of power state on errors with -EIO manner. 6. Revise the DP detection by TX type and its DP-FW status during booting and resume. 7. Correct the CamelCase Style. 8. Use register reading while needing, and remove to hold full register. 9. Instead of 'u8', revise to 'bool' on swwitch of PHY and video. 10.Correct typo 11.Remove the duplicated copy of TX definition. 12.Use EDID_LENGTH as the constant of 128. Signed-off-by: KuoHsiang Chou Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20220428075603.20904-1-kuohsiang_chou@aspeedtech.com

Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2022-02-24T19:50:18+00:00

drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Split out panel-lvds and lvds dt bindings . - Put yes/no on/off disabled/enabled strings in linux/string_helpers.h and use it in drivers and tomoyo. - Clarify dma_fence_chain and dma_fence_array should never include eachother. - Flatten chains in syncobj's. - Don't double add in fbdev/defio when page is already enlisted. - Don't sort deferred-I/O pages by default in fbdev. Core Changes: - Fix missing pm_runtime_put_sync in bridge. - Set modifier support to only linear fb modifier if drivers don't advertise support. - As a result, we remove allow_fb_modifiers. - Add missing clear for EDID Deep Color Modes in drm_reset_display_info. - Assorted documentation updates. - Warn once in drm_clflush if there is no arch support. - Add missing select for dp helper in drm_panel_edp. - Assorted small fixes. - Improve fb-helper's clipping handling. - Don't dump shmem mmaps in a core dump. - Add accounting to ttm resource manager, and use it in amdgpu. - Allow querying the detected eDP panel through debugfs. - Add helpers for xrgb8888 to 8 and 1 bits gray. - Improve drm's buddy allocator. - Add selftests for the buddy allocator. Driver Changes: - Add support for nomodeset to a lot of drm drivers. - Use drm_module_*_driver in a lot of drm drivers. - Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau, bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86. - Add bridge/it6505. - Create DP and DVI-I connectors in ast. - Assorted nouveau backlight fixes. - Rework amdgpu reset handling. - Add dt bindings for ingenic,jz4780-dw-hdmi. - Support reading edid through aux channel in ingenic. - Add a drm driver for Solomon SSD130x OLED displays. - Add simple support for sharp LQ140M1JW46. - Add more panels to nt35560. Signed-off-by: Dave Airlie From: Maarten Lankhorst Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com

Merge tag 'drm-intel-next-2022-02-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

2022-02-11T04:14:07+00:00

Cross-subsystem Changes: ------------------------ dma-buf: - dma-buf-map: Rename to iosys-map (Lucas) Core Changes: ------------- drm: - Always include the debugfs_entry in drm_crtc (Ville) - Add orientation quirk for GPD Win Max (Anisse) Driver Changes: --------------- gvt: - Constify some pointers. (Rikard Falkeborn) - Use list_entry to access list members. (Guenter Roeck) - Fix cmd parser error for Passmark9. (Zhenyu Wang) i915: - Various clean-ups including headers and removing unused and unnecessary stuff\ (Jani, Hans, Andy, Ville) - Cleaning up on our registers definitions i915_reg.h (Matt) - More multi-FBC refactoring (Ville) - Baytrail backlight fix (Hans) - DG1 OPROM read through SPI controller (Clint) - ADL-N platform enabling (Tejas) - Fix slab-out-of-bounds access (Jani) - Add opregion mailbox #5 support for possible EDID override (Anisse) - Fix possible NULL dereferences (Harish) - Updates and fixes around display voltage swing values (Clint, Jose) - Fix RPM wekeref on PXP code (Juston) - Many register definitions clean-up, including planes registers (Ville) - More conversion towards display version over the old gen (Madhumitha, Ville) - DP MST ESI handling improvements (Jani) - drm device based logging conversions (Jani) - Prevent divide by zero (Dan) - Introduce ilk_pch_pre_enable for complete modeset abstraction (Ville) - Async flip optimization for DG2 (Stanislav) - Multiple DSC and bigjoiner fixes and improvements (Ville) - Fix ADL-P TypeC Phy ready status readout (Imre) - Fix up DP DFP 4:2:0 handling more display related fixes (Ville) - Display M/N cleanup (Ville) - Switch to use VGA definitions from video/vga.h (Jani) - Fixes and improvements to abstract CPU architecture (Lucas) - Disable unsused power wells left enabled by BIOS (Imre) - Allow !join_mbus cases for adlp+ dbuf configuration (Ville) - Populate pipe dbuf slices more accurately during readout (Ville) - Workaround broken BIOS DBUF configuration on TGL/RKL (Ville) - Fix trailing semicolon (Lucas) Signed-off-by: Dave Airlie From: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/YgKFLmCgpv4vQEa1@intel.com