kernel/linux.git/drivers/gpu/drm/ast/ast_post.c, branch linux-4.4.y

drm/ast: Handle configuration without P2A bridge

2017-07-05T12:37:15+00:00

commit 71f677a91046599ece96ebab21df956ce909c456 upstream. The ast driver configures a window to enable access into BMC memory space in order to read some configuration registers. If this window is disabled, which it can be from the BMC side, the ast driver can't function. Closing this window is a necessity for security if a machine's host side and BMC side are controlled by different parties; i.e. a cloud provider offering machines "bare metal". A recent patch went in to try to check if that window is open but it does so by trying to access the registers in question and testing if the result is 0xffffffff. This method will trigger a PCIe error when the window is closed which on some systems will be fatal (it will trigger an EEH for example on POWER which will take out the device). This patch improves this in two ways: - First, if the firmware has put properties in the device-tree containing the relevant configuration information, we use these. - Otherwise, a bit in one of the SCU scratch registers (which are readable via the VGA register space and writeable by the BMC) will indicate if the BMC has closed the window. This bit has been defined by Y.C Chen from Aspeed. If the window is closed and the configuration isn't available from the device-tree, some sane defaults are used. Those defaults are hopefully sufficient for standard video modes used on a server. Signed-off-by: Russell Currey Acked-by: Joel Stanley Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Dave Airlie Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

drm/ast: Fixed system hanged if disable P2A

2017-06-17T04:39:38+00:00

[ Upstream commit 6c971c09f38704513c426ba6515f22fb3d6c87d5 ] The original ast driver will access some BMC configuration through P2A bridge that can be disabled since AST2300 and after. It will cause system hanged if P2A bridge is disabled. Here is the update to fix it. Signed-off-by: Y.C. Chen Signed-off-by: Dave Airlie Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/ast: Fix AST2400 POST failure without BMC FW or VBIOS

2017-03-15T01:57:14+00:00

commit 3856081eede297b617560b85e948cfb00bb395ec upstream. The current POST code for the AST2300/2400 family doesn't work properly if the chip hasn't been initialized previously by either the BMC own FW or the VBIOS. This fixes it. Signed-off-by: Y.C. Chen Signed-off-by: Benjamin Herrenschmidt Tested-by: Y.C. Chen Acked-by: Joel Stanley Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/ast: Call open_key before enable_mmio in POST code

2017-03-15T01:57:14+00:00

commit 9bb92f51558f2ef5f56c257bdcea0588f31d857e upstream. open_key enables access the registers used by enable_mmio Signed-off-by: Y.C. Chen Signed-off-by: Benjamin Herrenschmidt Acked-by: Joel Stanley Tested-by: Y.C. Chen Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/ast: Fix test for VGA enabled

2017-03-15T01:57:14+00:00

commit 905f21a49d388de3e99438235f3301cabf0c0ef4 upstream. The test to see if VGA was already enabled is doing an unnecessary second test from a register that may or may not have been initialized to a valid value. Remove it. Signed-off-by: Y.C. Chen Signed-off-by: Benjamin Herrenschmidt Acked-by: Joel Stanley Tested-by: Y.C. Chen Signed-off-by: Dave Airlie Signed-off-by: Greg Kroah-Hartman

drm/ast: POST chip at probe time if VGA not enabled

2014-09-15T01:37:44+00:00

We need to do it on machines without a BIOS such as POWER8. Also for detection to work without triggering PCIe errors, we need to enable VGA early on, inside ast_detect_chip(). While touching those files, replace a few hard coded register numbers with the corresponding symbolic constant. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Dave Airlie

drm: Remove spurious ';'

2014-06-09T23:35:42+00:00

One small step after another, the never-ending crusade towards better code continues. Signed-off-by: Damien Lespiau Signed-off-by: Dave Airlie

Merge branch 'ast-updates' of ssh://people.freedesktop.org/~/linux into drm-next

2014-05-19T01:15:08+00:00

Pull in latest updates to AST driver. * 'ast-updates' of ssh://people.freedesktop.org/~/linux: drm/ast: initial DP501 support (v0.2) drm/ast: rename the mindwm/moutdwm and deinline them drm/ast: resync the dram post code with upstream drm/ast: add AST 2400 support. drm/ast: add widescreen + rb modes from X.org driver (v2)

drm/ast: initial DP501 support (v0.2)

2014-05-19T01:13:57+00:00

This is the initial attempt at porting the DP501 code from the userspace driver, the firmware file is in http://people.freedesktop.org/~airlied/ast_dp501_fw.bin this should really be exposed as another encoder/connector that is cloneable v0.2: init 3rd tx properly, add scratch reduction of VRAM size backup firmware properly. Signed-off-by: Dave Airlie

drm/ast: rename the mindwm/moutdwm and deinline them

2014-05-19T01:13:56+00:00

we'll need these elsewhere for dp501. Signed-off-by: Dave Airlie