kernel/linux.git/drivers/gpu/drm/amd/powerplay, branch v4.19.148

drm/amdgpu: Fix bug in reporting voltage for CIK

2020-09-17T11:45:26+00:00

[ Upstream commit d98299885c9ea140c1108545186593deba36c4ac ] On my R9 390, the voltage was reported as a constant 1000 mV. This was due to a bug in smu7_hwmgr.c, in the smu7_read_sensor() function, where some magic constants were used in a condition, to determine whether the voltage should be read from PLANE2_VID or PLANE1_VID. The VDDC mask was incorrectly used, instead of the VDDGFX mask. This patch changes the code to use the correct defined constants (and apply the correct bitshift), thus resulting in correct voltage reporting. Signed-off-by: Sandeep Raghuraman Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/pm: correct Vega12 swctf limit setting

2020-09-03T09:24:29+00:00

commit e0ffd340249699ad27a6c91abdfa3e89f7823941 upstream. Correct the Vega12 thermal swctf limit. Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/pm: correct Vega10 swctf limit setting

2020-09-03T09:24:29+00:00

commit b05d71b51078fc428c6b72582126d9d75d3c1f4c upstream. Correct the Vega10 thermal swctf limit. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1267 Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume

2020-08-21T09:05:39+00:00

commit f87812284172a9809820d10143b573d833cd3f75 upstream. Reproducing bug report here: After hibernating and resuming, DPM is not enabled. This remains the case even if you test hibernate using the steps here: https://www.kernel.org/doc/html/latest/power/basic-pm-debugging.html I debugged the problem, and figured out that in the file hardwaremanager.c, in the function, phm_enable_dynamic_state_management(), the check 'if (!hwmgr->pp_one_vf && smum_is_dpm_running(hwmgr) && !amdgpu_passthrough(adev) && adev->in_suspend)' returns true for the hibernate case, and false for the suspend case. This means that for the hibernate case, the AMDGPU driver doesn't enable DPM (even though it should) and simply returns from that function. In the suspend case, it goes ahead and enables DPM, even though it doesn't need to. I debugged further, and found out that in the case of suspend, for the CIK/Hawaii GPUs, smum_is_dpm_running(hwmgr) returns false, while in the case of hibernate, smum_is_dpm_running(hwmgr) returns true. For CIK, the ci_is_dpm_running() function calls the ci_is_smc_ram_running() function, which is ultimately used to determine if DPM is currently enabled or not, and this seems to provide the wrong answer. I've changed the ci_is_dpm_running() function to instead use the same method that some other AMD GPU chips do (e.g Fiji), which seems to read the voltage controller. I've tested on my R9 390 and it seems to work correctly for both suspend and hibernate use cases, and has been stable so far. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208839 Signed-off-by: Sandeep Raghuraman Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/powerplay: fix a crash when overclocking Vega M

2020-07-29T08:16:58+00:00

commit 88bb16ad998a0395fe4b346b7d3f621aaa0a2324 upstream. Avoid kernel crash when vddci_control is SMU7_VOLTAGE_CONTROL_NONE and vddci_voltage_table is empty. It has been tested on Intel Hades Canyon (i7-8809G). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=208489 Fixes: ac7822b0026f ("drm/amd/powerplay: add smumgr support for VEGAM (v2)") Reviewed-by: Evan Quan Signed-off-by: Qiu Wenbo Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Replace invalid device ID with a valid device ID

2020-06-25T13:33:07+00:00

commit 790243d3bf78f9830a3b2ffbca1ed0f528295d48 upstream. Initializes Powertune data for a specific Hawaii card by fixing what looks like a typo in the code. The device ID 66B1 is not a supported device ID for this driver, and is not mentioned elsewhere. 67B1 is a valid device ID, and is a Hawaii Pro GPU. I have tested on my R9 390 which has device ID 67B1, and it works fine without problems. Signed-off-by: Sandeep Raghuraman Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)

2020-05-10T08:30:07+00:00

[ Upstream commit bbc25dadc7ed19f9d6b2e30980f0eb4c741bb8bf ] Initialize thermal controller fields in the PowerPlay table for Hawaii GPUs, so that fan speeds are reported. Signed-off-by: Sandeep Raghuraman Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled

2020-04-21T07:03:10+00:00

commit 8c7f0a44b4b4ef16df8f44fbaee6d1f5d1593c83 upstream. Should prevent flicker if PP_OVERDRIVE_MASK is set. bug: https://bugs.freedesktop.org/show_bug.cgi?id=102646 bug: https://bugs.freedesktop.org/show_bug.cgi?id=108941 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1088 bug: https://gitlab.freedesktop.org/drm/amd/-/issues/628 Signed-off-by: Sergei Lopatin Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage

2020-02-24T07:34:53+00:00

[ Upstream commit 1064ad4aeef94f51ca230ac639a9e996fb7867a0 ] Cull out 0 clocks to avoid a warning in DC. Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Evan Quan Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency

2020-02-24T07:34:53+00:00

[ Upstream commit 4d0a72b66065dd7e274bad6aa450196d42fd8f84 ] Only send non-0 clocks to DC for validation. This mirrors what the windows driver does. Bug: https://gitlab.freedesktop.org/drm/amd/issues/963 Reviewed-by: Evan Quan Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin