kernel/linux.git/drivers/gpu/drm/amd/pm, branch v5.15.7

drm/amd/pm: Remove artificial freq level on Navi1x

2021-12-08T08:04:39+00:00

[ Upstream commit be83a5676767c99c2417083c29d42aa1e109a69d ] Print Navi1x fine grained clocks in a consistent manner with other SOCs. Don't show aritificial DPM level when the current clock equals min or max. Signed-off-by: Lijo Lazar Reviewed-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amdgpu/pm: fix powerplay OD interface

2021-12-01T08:04:42+00:00

commit d5c7255dc7ff6e1239d794b9c53029d83ced04ca upstream. The overclocking interface currently appends data to a string. Revert back to using sprintf(). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774 Fixes: 6db0c87a0a8ee1 ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit") Acked-by: Evan Quan Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/pm: avoid duplicate powergate/ungate setting

2021-11-25T08:49:06+00:00

commit 6ee27ee27ba8b2e725886951ba2d2d87f113bece upstream. Just bail out if the target IP block is already in the desired powergate/ungate state. This can avoid some duplicate settings which sometimes may cause unexpected issues. Link: https://lore.kernel.org/all/YV81vidWQLWvATMM@zn.tnic/ Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214921 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215025 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1789 Fixes: bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend") Signed-off-by: Evan Quan Tested-by: Borislav Petkov Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amdgpu/powerplay: fix sysfs_emit/sysfs_emit_at handling

2021-11-18T18:17:10+00:00

[ Upstream commit e9c76719c1e99caf95e70de74170291b9457bbc1 ] sysfs_emit and sysfs_emit_at requrie a page boundary aligned buf address. Make them happy! v2: fix sysfs_emit -> sysfs_emit_at missed conversions Cc: Lang Yu Cc: Darren Powell Fixes: 6db0c87a0a8e ("amdgpu/pm: Replace hwmgr smu usage of sprintf with sysfs_emit") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1774 Reviewed-by: Lang Yu Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amdgpu/pm: properly handle sclk for profiling modes on vangogh

2021-11-18T18:16:17+00:00

[ Upstream commit 68e3871dcd6e547f6c47454492bc452356cb9eac ] When selecting between levels in the force performance levels interface sclk (gfxclk) was not set correctly for all levels. Select the proper sclk settings for all levels. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1726 Reviewed-by: Evan Quan Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/pm: Update intermediate power state for SI

2021-09-23T21:06:11+00:00

Update the current state as boot state during dpm initialization. During the subsequent initialization, set_power_state gets called to transition to the final power state. set_power_state refers to values from the current state and without current state populated, it could result in NULL pointer dereference. For ex: on platforms where PCI speed change is supported through ACPI ATCS method, the link speed of current state needs to be queried before deciding on changing to final power state's link speed. The logic to query ATCS-support was broken on certain platforms. The issue became visible when broken ATCS-support logic got fixed with commit f9b7f3703ff9 ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)"). Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1698 Signed-off-by: Lijo Lazar Reviewed-by: Hawking Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amd/pm: fix runpm hang when amdgpu loaded prior to sound driver

2021-09-16T13:56:24+00:00

Current RUNPM mechanism relies on PMFW to master the timing for BACO in/exit. And that needs cooperation from sound driver for dstate change notification for function 1(audio). Otherwise(on sound driver missing), BACO cannot be kicked in correctly and hang will be observed on RUNPM exit. By switching back to legacy message way on sound driver missing, we are able to fix the runpm hang observed for the scenario below: amdgpu driver loaded -> runpm suspend kicked -> sound driver loaded Signed-off-by: Evan Quan Reported-and-tested-by: Pierre-Eric Pelloux-Prayer Reviewed-by: Lijo Lazar Reviewed-by: Guchun Chen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu: add manual sclk/vddc setting support for cyan skilfish(v3)

2021-09-16T13:56:23+00:00

Add manual sclk/vddc setting supoort via pp_od_clk_voltage sysfs to maintain consistency with other asics. As cyan skillfish doesn't support DPM, there is only a single frequency and voltage to adjust. v2: maintain consistency and add command guide. v3: adjust user settings storage and coding style. Command guide: echo vc point sclk vddc > pp_od_clk_voltage "vc" - sclk voltage curve "point" - must be 0 "sclk" - target value of sclk(MHz), should be in safe range "vddc" - target value of vddc(mV), a 6.25(mV) stepping is recommended and should be in safe range (the real vddc is an approximation of target value) echo c > pp_od_clk_voltage "c" - commit the changes of sclk and vddc, only after the commit command, the target values set by "vc" command will take effect echo r > pp_od_clk_voltage "r" - reset sclk and vddc to default value, a subsequent commit command is needed to take effect Example: 1) Check default sclk and vddc $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 862mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 2) Set sclk to 1500MHz and vddc to 700mV $ echo vc 0 1500 700 > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1500Mhz * OD_VDDC: 0: 693mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV 3) Reset sclk and vddc to default $ echo r > pp_od_clk_voltage $ echo c > pp_od_clk_voltage $ cat pp_od_clk_voltage OD_SCLK: 0: 1800Mhz * OD_VDDC: 0: 874mV * OD_RANGE: SCLK: 1000Mhz 2000Mhz VDDC: 700mV 1129mV NOTE: We don't specify an explicit safe range, you can set any values between min and max at your own risk. Enjoy! Signed-off-by: Lang Yu Reviewed-by: Lijo Lazar Reviewed-by: Huang Rui Signed-off-by: Alex Deucher

drm/amdgpu: add some pptable funcs for cyan skilfish(v3)

2021-09-16T13:56:23+00:00

Add print_clk_levels and read_sensor pptable funcs for cyan skilfish. v2: keep consitency and add get_gpu_metrics callback. v3: use sysfs_emit_at() in sysfs show function. Signed-off-by: Lang Yu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher

drm/amdgpu: update SMU driver interface for cyan skilfish(v3)

2021-09-16T13:56:23+00:00

Add SmuMetrics_t definition for cyan skilfish. v2: update SmuMetrics_t definition. v3: cleanup and rearrange the order of fields. Signed-off-by: Lang Yu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher