kernel/linux.git/drivers/gpu/drm/amd/display, branch v4.20.5

drm/amd/display: Fix disabled cursor on top screen edge

2019-01-26T08:20:51+00:00

commit ae1cf20df7a9c60ff5ef41c3315c33c1a5fafd77 upstream. [Why] The cursor vanishes when touching the top of edge of the screen for Raven on Linux. This occurs because the cursor height is not taken into account when deciding to disable the cursor. [How] Factor in the cursor height into the cursor calculations - and mimic the existing x position calculations. Fixes: 94a4ffd1d40b ("drm/amd/display: fix PIP bugs on Dal3") Signed-off-by: Nicholas Kazlauskas Reviewed-by: Harry Wentland Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Guard against null stream_state in set_crc_source

2019-01-26T08:20:39+00:00

[ Upstream commit f41a895026b8cb6f765190de7d2e7bc3ccbbd183 ] [Why] The igt@kms_plane@pixel-format-pipe tests can create a sequence where stream_state is NULL during amdgpu_dm_crtc_set_crc_source which results in a null pointer dereference. [How] Guard against stream_state being NULL before accessing its fields. This doesn't fix the root cause of the issue so a DRM_ERROR is generated to still fail the tests. Signed-off-by: Nicholas Kazlauskas Reviewed-by: David Francis Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amdgpu: Don't fail resume process if resuming atomic state fails

2019-01-16T21:03:25+00:00

commit 2d1af6a11cb9d88e0e3dd10258904c437fe1b315 upstream. This is an ugly one unfortunately. Currently, all DRM drivers supporting atomic modesetting will save the state that userspace had set before suspending, then attempt to restore that state on resume. This probably worked very well at one point, like many other things, until DP MST came into the picture. While it's easy to restore state on normal display connectors that were disconnected during suspend regardless of their state post-resume, this can't really be done with MST because of the fact that setting up a downstream sink requires performing sideband transactions between the source and the MST hub, sending out the ACT packets, etc. Because of this, there isn't really a guarantee that we can restore the atomic state we had before suspend once we've resumed. This sucks pretty bad, but so far I haven't run into any compositors that this actually causes serious issues with. Most compositors will notice the hotplug we send afterwards, and then reprobe state. Since nouveau and i915 also don't fail the suspend/resume process due to failing to restore the atomic state, let's make amdgpu match this behavior. Better to resume the GPU properly, then to stop the process half way because of a potentially unavoidable atomic commit failure. Eventually, we'll have a real fix for this problem on the DRM level. But we've got some more important low-hanging fruit to deal with first. Signed-off-by: Lyude Paul Reviewed-by: Harry Wentland Cc: Jerry Zuo Cc: # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()

2019-01-16T21:03:25+00:00

commit fe7553bef8d676d1d8b40666868b33ec39b9df5d upstream. drm_dp_mst_topology_mgr_resume() returns whether or not it managed to find the topology in question after a suspend resume cycle, and the driver is supposed to check this value and disable MST accordingly if it's gone-in addition to sending a hotplug in order to notify userspace that something changed during suspend. Currently, amdgpu just makes the mistake of ignoring the return code from drm_dp_mst_topology_mgr_resume() which means that if a topology was removed in suspend, amdgpu never notices and assumes it's still connected which leads to all sorts of problems. So, fix this by actually checking the rc from drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the function while we're at it to fix the over-indenting. Signed-off-by: Lyude Paul Reviewed-by: Harry Wentland Cc: Jerry Zuo Cc: # v4.15+ Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix MST dp_blank REG_WAIT timeout

2019-01-16T21:03:25+00:00

commit 8c9d90eebd23b6d40ddf4ce5df5ca2b932336a06 upstream. Need to blank stream before deallocate MST payload. [drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu] Call Trace: dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu] core_link_disable_stream+0x40/0x230 [amdgpu] ? generic_reg_update_ex+0xdb/0x130 [amdgpu] dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu] dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu] ? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu] dc_commit_state+0x2ba/0x4d0 [amdgpu] amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu] ? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu] ? wait_for_completion_timeout+0x1f/0x120 ? wait_for_completion_interruptible+0x1c/0x160 commit_tail+0x3d/0x60 [drm_kms_helper] drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper] drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm] drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm] drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm] drm_ioctl+0x1e0/0x430 [drm] ? drm_mode_connector_set_obj_prop+0x70/0x70 [drm] ? ep_read_events_proc+0xb0/0xb0 ? ep_scan_ready_list.constprop.18+0x1e6/0x1f0 ? timerqueue_add+0x52/0x80 amdgpu_drm_ioctl+0x49/0x80 [amdgpu] do_vfs_ioctl+0x90/0x5f0 SyS_ioctl+0x74/0x80 do_syscall_64+0x74/0x140 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 ---[ end trace 3ed7b77a97d60f72 ]--- Signed-off-by: Jerry (Fangzhi) Zuo Reviewed-by: Hersen Wu Acked-by: Harry Wentland Acked-by: Alex Deucher Tested-by: Lyude Paul Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix overflow/truncation from strncpy.

2018-12-04T20:01:56+00:00

[Why] New GCC warnings for stringop-truncation and stringop-overflow help catch common misuse of strncpy. This patch suppresses these warnings by fixing bugs identified by them. [How] Since the parameter passed for name in amdpgu_dm_create_common_mode has no fixed length, if the string is >= DRM_DISPLAY_MODE_LEN then mode->name will not be null-terminated. The truncation in fill_audio_info won't actually occur (and the string will be null-terminated since the buffer is initialized to zero), but the warning can be suppressed by using the proper buffer size. This patch fixes both issues by using the real size for the buffer and making use of strscpy (which always terminates). Signed-off-by: Nicholas Kazlauskas Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher

drm/amd/display: Fix 6x4K displays light-up on Vega20 (v2)

2018-11-29T19:36:03+00:00

[Why] More than 4x4K didn't lightup on Vega20 due to low dcfclk value. Powerplay expects valid min requirement for dcfclk from DC. [How] Update min_dcfclock_khz based on min_engine_clock value. v2: backport to 4.20 (Alex) Reviewed-by: Hersen Wu Reviewed-by: Feifei Xu Reviewed-by: Evan Quan Acked-by: Alex Deucher Signed-off-by: Roman Li Signed-off-by: Alex Deucher

drm/amd/display: Fix unintialized max_bpc state values

2018-11-29T19:11:10+00:00

[Why] If the "max bpc" isn't explicitly set in the atomic state then it have a value of 0. This has the correct behavior of limiting a panel to 8bpc in the case where the panel supports 8bpc. In the case of eDP panels this isn't a true assumption - there are panels that can only do 6bpc. Banding occurs for these displays. [How] Initialize the max_bpc when the connector resets to 8bpc. Also carry over the value when the state is duplicated. Bugzilla: https://bugs.freedesktop.org/108825 Fixes: 307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property") Signed-off-by: Nicholas Kazlauskas Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amd/dm: Understand why attaching path/tile properties are needed

2018-11-21T20:52:32+00:00

Path property is used for userspace to know what MST connector goes to what actual DRM DisplayPort connector, the tiling property is for tiling configurations. Not sure what else there is to figure out. Signed-off-by: Lyude Paul Reviewed-by: Jerry (Fangzhi) Zuo Cc: Stable Signed-off-by: Alex Deucher

drm/amd/dm: Don't forget to attach MST encoders

2018-11-21T20:52:10+00:00

The change fixed huge delay in SST daisy chain and S3 soft hang observed in 4.19 kernel rebase. Regression point in drm: drm/fb-helper: Eliminate the .best_encoder() usage The aux sequence is altered due to the failure in drm_connector_for_each_possible_encoder(). The failure is caused by missing attached encoder in the process of adding MST connector. drm_dp_send_enum_path_resources() aux transaction is pushed after mode probe, which causes conflict to drm_dp_mst_i2c_xfer(), leading to the transaction timeout. Signed-off-by: Lyude Paul Reviewed-by: Jerry (Fangzhi) Zuo Cc: Stable Signed-off-by: Alex Deucher