kernel/linux.git/drivers/gpu/drm/amd/display, branch v4.19.237

drm/amd/display: Pass PCI deviceid into DC

2021-10-06T13:31:21+00:00

commit d942856865c733ff60450de9691af796ad71d7bc upstream. [why] pci deviceid not passed to dal dc, without proper break, dcn2.x falls into dcn3.x code path [how] pass in pci deviceid, and break once dal_version initialized. Reviewed-by: Zhan Liu Acked-by: Anson Jacob Signed-off-by: Charlene Liu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/amdgpu: Update debugfs link_settings output link_rate field in hex

2021-09-22T09:48:04+00:00

[ Upstream commit 1a394b3c3de2577f200cb623c52a5c2b82805cec ] link_rate is updated via debugfs using hex values, set it to output in hex as well. eg: Resolution: 1920x1080@144Hz cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x14 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 0 0x0 0 echo "4 0x1e" > /sys/kernel/debug/dri/0/DP-1/link_settings cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x1e 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 4 0x1e 0 Signed-off-by: Anson Jacob Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: fix incorrrect valid irq check

2021-07-20T14:16:04+00:00

commit e38ca7e422791a4d1c01e56dbf7f9982db0ed365 upstream. valid DAL irq should be < DAL_IRQ_SOURCES_NUMBER. Signed-off-by: Guchun Chen Reviewed-and-tested-by: Evan Quan Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/display: fix use_max_lb flag for 420 pixel formats

2021-07-20T14:15:59+00:00

[ Upstream commit 8809a7a4afe90ad9ffb42f72154d27e7c47551ae ] Right now the flag simply selects memory config 0 when flag is true however 420 modes benefit more from memory config 3. Signed-off-by: Dmytro Laktyushkin Reviewed-by: Aric Cyr Acked-by: Stylon Wang Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Disconnect non-DP with no EDID

2021-06-03T06:38:10+00:00

[ Upstream commit 080039273b126eeb0185a61c045893a25dbc046e ] [Why] Active DP dongles return no EDID when dongle is connected, but VGA display is taken out. Current driver behavior does not remove the active display when this happens, and this is a gap between dongle DTP and dongle behavior. [How] For active DP dongles and non-DP scenario, disconnect sink on detection when no EDID is read due to timeout. Signed-off-by: Chris Park Reviewed-by: Nicholas Kazlauskas Acked-by: Stylon Wang Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails

2021-03-07T11:18:59+00:00

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ] [Why] If the BIOS table is invalid or corrupt then get_i2c_info can fail and we dereference a NULL pointer. [How] Check that ddc_pin is not NULL before using it and log an error if it is because this is unexpected. Tested-by: Daniel Wheeler Signed-off-by: Nicholas Kazlauskas Reviewed-by: Eric Yang Acked-by: Anson Jacob Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Fix 10/12 bpc setup in DCE output bit depth reduction.

2021-03-04T08:39:39+00:00

[ Upstream commit 1916866dfa4aaceba1a70db83fde569387649d93 ] In set_clamp(), the comments and definitions for the COLOR_DEPTH_101010 and COLOR_DEPTH_121212 cases directly contradict the code comment which explains how this should work, whereas the COLOR_DEPTH_888 case is consistent with the code comments. Comment says the bitmask should be chosen to align to the top-most 10 or 12 MSB's on a 14 bit bus, but the implementation contradicts that: 10 bit case sets a mask for 12 bpc clamping, whereas 12 bit case sets a mask for 14 bpc clamping. Note that during my limited testing on DCE-8.3 (HDMI deep color) and DCE-11.2 (DP deep color), this didn't have any obvious ill effects, neither did fixing it change anything obvious for the better, so this fix may be inconsequential on DCE, and just reduce the confusion of innocent bystanders when reading the code and trying to investigate problems with 10 bpc+ output. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Mario Kleiner Cc: Harry Wentland Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Free atomic state after drm_atomic_commit

2021-02-23T14:00:56+00:00

[ Upstream commit 2abaa323d744011982b20b8f3886184d56d23946 ] [why] drm_atomic_commit was changed so that the caller must free their drm_atomic_state reference on successes. [how] Add drm_atomic_commit_put after drm_atomic_commit call in dm_force_atomic_commit. Signed-off-by: Victor Lu Reviewed-by: Roman Li Acked-by: Anson Jacob Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Fix dc_sink kref count in emulated_link_detect

2021-02-23T14:00:56+00:00

[ Upstream commit 3ddc818d9bb877c64f5c649beab97af86c403702 ] [why] prev_sink is not used anywhere else in the function and the reference to it from dc_link is replaced with a new dc_sink. [how] Change dc_sink_retain(prev_sink) to dc_sink_release(prev_sink). Signed-off-by: Victor Lu Reviewed-by: Nicholas Kazlauskas Acked-by: Anson Jacob Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Don't invoke kgdb_breakpoint() unconditionally

2020-11-05T10:08:52+00:00

commit 8b7dc1fe1a5c1093551f6cd7dfbb941bd9081c2e upstream. ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a kernel panic when no kdb stuff is attached, since the kgdb_breakpoint() call issues INT3. It's nothing but a surprise for normal end-users. For avoiding the pitfall, make the kgdb_breakpoint() call only when CONFIG_DEBUG_KERNEL_DC is set. https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: Acked-by: Alex Deucher Reviewed-by: Nicholas Kazlauskas Signed-off-by: Takashi Iwai Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman