kernel/linux.git/drivers/gpu/drm/amd/display/dc, branch v6.6.16

drm/amd/display: Fix minor issues in BW Allocation Phase2

2024-02-05T20:14:30+00:00

[ Upstream commit aa5dc05340eb97486a631ce6bccb8d020bf6b56b ] [Why] Fix minor issues in BW Allocation Phase2. [How] - In set_usb4_req_bw_req(), link->dpia_bw_alloc_config.response_ready flag should be reset before writing DPCD REQUEST_BW. - Fix the granularity for value of 2 in get_bw_granularity(). - Removed bandwidth allocation support display fw boot option as the fw would read feature enable status from bios. - Clean up DPIA_EST_BW_CHANGED and DPIA_BW_REQ_SUCCESS cases in dpia_handle_bw_alloc_response(). - Removed allocate_usb4_bw and deallocate_usb4_bw. - Optimized loop in get_lowest_dpia_index(). - Updated link_dp_dpia_allocate_usb4_bandwidth_for_stream() and set_usb4_req_bw_req() to always issue request bw. Tested-by: Daniel Wheeler Reviewed-by: PeiChen Huang Acked-by: Rodrigo Siqueira Signed-off-by: Meenakshikumar Somasundaram Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Only clear symclk otg flag for HDMI

2024-02-05T20:14:29+00:00

[ Upstream commit dff45f03f508c92cd8eb2050e27b726726b8ae0b ] [Description] There is a corner case where the symclk otg flag is cleared when disabling the phantom pipe for subvp (because the phantom and main pipe share the same link). This is undesired because we need the maintain the correct symclk otg flag state for the main pipe. For now only clear the flag only for HDMI signal type, since it's only set for HDMI signal type (phantom is virtual). The ideal solution is to not clear it if the stream is phantom but currently there's a bug that doesn't allow us to do this. Once this issue is fixed the proper fix can be implemented. Reviewed-by: Samson Tam Acked-by: Wayne Lin Signed-off-by: Alvin Lee Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: make flip_timestamp_in_us a 64-bit variable

2024-02-05T20:14:29+00:00

[ Upstream commit 6fb12518ca58412dc51054e2a7400afb41328d85 ] [Why] This variable currently overflows after about 71 minutes. This doesn't cause any known functional issues but it does make debugging more difficult. [How] Make it a 64-bit variable. Reviewed-by: Aric Cyr Acked-by: Wayne Lin Signed-off-by: Josip Pavic Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Force p-state disallow if leaving no plane config

2024-02-05T20:14:28+00:00

[ Upstream commit 9a902a9073c287353e25913c0761bfed49d75a88 ] [Description] - When we're in a no plane config, DCN is always asserting P-State allow - This creates a scenario where the P-State blackout can start just as VUPDATE takes place and transitions the DCN config to a one where one or more HUBP's are active which can result in underflow - To fix this issue, force p-state disallow and unforce after the transition from no planes case -> one or more planes active Reviewed-by: Samson Tam Acked-by: Aurabindo Pillai Signed-off-by: Alvin Lee Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: For prefetch mode > 0, extend prefetch if possible

2024-02-05T20:14:28+00:00

[ Upstream commit dd4e4bb28843393065eed279e869fac248d03f0f ] [Description] For mode programming we want to extend the prefetch as much as possible (up to oto, or as long as we can for equ) if we're not already applying the 60us prefetch requirement. This is to avoid intermittent underflow issues during prefetch. The prefetch extension is applied under the following scenarios: 1. We're in prefetch mode 1 (i.e. we don't support MCLK switch in blank) 2. We're using subvp or drr methods of p-state switch, in which case we we don't care if prefetch takes up more of the blanking time Mode programming typically chooses the smallest prefetch time possible (i.e. highest bandwidth during prefetch) presumably to create margin between p-states / c-states that happen in vblank and prefetch. Therefore we only apply this prefetch extension when p-state in vblank is not required (UCLK p-states take up the most vblank time). Reviewed-by: Jun Lei Acked-by: Aurabindo Pillai Signed-off-by: Alvin Lee Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Fix MST PBN/X.Y value calculations

2024-02-05T20:14:26+00:00

[ Upstream commit 94bbf802efd0a8f13147d6664af6e653637340a8 ] Changing PBN calculation to be more in line with spec. We don't need to inflate PBN_NATIVE value by the 1.006 margin, since that is already taken care of in the get_pbn_per_slot function. Tested-by: Daniel Wheeler Reviewed-by: Wenjing Liu Acked-by: Rodrigo Siqueira Signed-off-by: Ilya Bakoulin Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Fix tiled display misalignment

2024-02-05T20:14:26+00:00

[ Upstream commit c4b8394e76adba4f50a3c2696c75b214a291e24a ] [Why] When otg workaround is applied during clock update, otgs of tiled display went out of sync. [How] To call dc_trigger_sync() after clock update to sync otgs again. Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Meenakshikumar Somasundaram Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions

2024-02-01T00:19:09+00:00

commit a58371d632ebab9ea63f10893a6b6731196b6f8d upstream. The 'status' variable in 'core_link_read_dpcd()' & 'core_link_write_dpcd()' was uninitialized. Thus, initializing 'status' variable to 'DC_ERROR_UNEXPECTED' by default. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:226 core_link_read_dpcd() error: uninitialized symbol 'status'. drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dpcd.c:248 core_link_write_dpcd() error: uninitialized symbol 'status'. Cc: stable@vger.kernel.org Cc: Jerry Zuo Cc: Jun Lei Cc: Wayne Lin Cc: Aurabindo Pillai Cc: Rodrigo Siqueira Cc: Hamza Mahfooz Signed-off-by: Srinivasan Shanmugam Reviewed-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix late derefrence 'dsc' check in 'link_set_dsc_pps_packet()'

2024-02-01T00:19:09+00:00

commit 3bb9b1f958c3d986ed90a3ff009f1e77e9553207 upstream. In link_set_dsc_pps_packet(), 'struct display_stream_compressor *dsc' was dereferenced in a DC_LOGGER_INIT(dsc->ctx->logger); before the 'dsc' NULL pointer check. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/link_dpms.c:905 link_set_dsc_pps_packet() warn: variable dereferenced before check 'dsc' (see line 903) Cc: stable@vger.kernel.org Cc: Aurabindo Pillai Cc: Rodrigo Siqueira Cc: Hamza Mahfooz Cc: Wenjing Liu Cc: Qingqing Zhuo Signed-off-by: Srinivasan Shanmugam Reviewed-by: Aurabindo Pillai Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Port DENTIST hang and TDR fixes to OTG disable W/A

2024-02-01T00:19:08+00:00

commit 4b56f7d47be87cde5f368b67bc7fac53a2c3e8d2 upstream. [Why] We can experience DENTIST hangs during optimize_bandwidth or TDRs if FIFO is toggled and hangs. [How] Port the DCN35 fixes to DCN314. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu Acked-by: Alex Hung Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman