kernel/linux.git/drivers/gpu/drm/amd/display/dc, branch v5.12.1

drm/amd/display: Add missing mask for DCN3

2021-04-07T21:30:39+00:00

[Why] DCN3 is not reusing DCN1 mask_sh_list, causing SURFACE_FLIP_INT_MASK missing in the mapping. [How] Add the corresponding entry to DCN3 list. Signed-off-by: Qingqing Zhuo Reviewed-by: Nicholas Kazlauskas Acked-by: Qingqing Zhuo Signed-off-by: Alex Deucher

drm/amdgpu/display: restore AUX_DPHY_TX_CONTROL for DCN2.x

2021-03-24T04:30:57+00:00

Commit 098214999c8f added fetching of the AUX_DPHY register values from the vbios, but it also changed the default values in the case when there are no values in the vbios. This causes problems with displays with high refresh rates. To fix this, switch back to the original default value for AUX_DPHY_TX_CONTROL. Fixes: 098214999c8f ("drm/amd/display: Read VBIOS Golden Settings Tbl") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1426 Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: Igor Kravchenko Cc: Aric Cyr Cc: Aurabindo Pillai Cc: stable@vger.kernel.org

drm/amd/display: Remove MPC gamut remap logic for DCN30

2021-03-18T04:05:22+00:00

[Why?] Should only reroute gamut remap to mpc unless 3D LUT is not used and all planes are using the same src->dest. [How?] Remove DCN30 specific logic for rerouting gamut remap to mpc. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by: Daniel Wheeler Signed-off-by: Dillon Varone Reviewed-by: Krunoslav Kovac Acked-by: Aric Cyr Acked-by: Solomon Chiu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amd/display: Correct algorithm for reversed gamma

2021-03-18T04:01:58+00:00

[Why] DCN30 needs to correctly program reversed gamma curve, which DCN20 already has. Also needs to fix a bug that 252-255 values are clipped. [How] Apply two fixes into DCN30. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1513 Tested-by: Daniel Wheeler Signed-off-by: Calvin Hou Reviewed-by: Jun Lei Reviewed-by: Krunoslav Kovac Acked-by: Solomon Chiu Acked-by: Vladimir Stempen Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amd/display: Copy over soc values before bounding box creation

2021-03-15T17:42:54+00:00

[Why] With certain fclock overclocks, state 1 may be chosen as the closest clock level. This may result in this state being empty if not populated beforehand, resulting in black screens and screen corruption. [How] Copy over all soc states to clock_limits before bounding box creation to avoid any cases with empty states. Fixes: f2459c52c84449 ("drm/amd/display: Add Bounding Box State for Low DF PState but High Voltage State") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1514 Signed-off-by: Sung Lee Reviewed-by: Tony Cheng Reviewed-by: Yongqiang Sun Acked-by: Qingqing Zhuo Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu/display: Use wm_table.entries for dcn301 calculate_wm

2021-03-10T21:19:27+00:00

[Why] For DGPU Navi, the wm_table.nv_entries are used. These entires are not populated for DCN301 Vangogh APU, but instead wm_table.entries are. [How] Use DCN21 Renoir style wm calculations. Signed-off-by: Leo Li Signed-off-by: Zhan Liu Reviewed-by: Dmytro Laktyushkin Acked-by: Zhan Liu Signed-off-by: Alex Deucher

drm/amd/display: Enabled pipe harvesting in dcn30

2021-03-10T21:17:27+00:00

[Why & How] Ported logic from dcn21 for reading in pipe fusing to dcn30. Supported configurations are 1 and 6 pipes. Invalid fusing will revert to 1 pipe being enabled. Tested-by: Daniel Wheeler Signed-off-by: Dillon Varone Reviewed-by: Jun Lei Acked-by: Eryk Brol Signed-off-by: Alex Deucher

drm/amd/display: Revert dram_clock_change_latency for DCN2.1

2021-03-10T21:16:27+00:00

[WHY & HOW] Using values provided by DF for latency may cause hangs in multi display configurations. Revert change to previous value. Tested-by: Daniel Wheeler Signed-off-by: Sung Lee Reviewed-by: Haonan Wang Acked-by: Eryk Brol Signed-off-by: Alex Deucher

drm/amd/display: Enable pflip interrupt upon pipe enable

2021-03-10T21:14:36+00:00

[Why] pflip interrupt would not be enabled promptly if a pipe is disabled and re-enabled, causing flip_done timeout error during DP compliance tests [How] Enable pflip interrupt upon pipe enablement Tested-by: Daniel Wheeler Signed-off-by: Qingqing Zhuo Reviewed-by: Nicholas Kazlauskas Acked-by: Eryk Brol Signed-off-by: Alex Deucher

drm/amdgpu/display: use GFP_ATOMIC in dcn21_validate_bandwidth_fp()

2021-03-10T21:13:13+00:00

After fixing nested FPU contexts caused by 41401ac67791 we're still seeing complaints about spurious kernel_fpu_end(). As it turns out this was already fixed for dcn20 in commit f41ed88cbd ("drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal") but never moved forward to dcn21. Signed-off-by: Holger Hoffstätte Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org