kernel/linux.git/drivers/gpu/drm/amd/display/dc, branch v4.19.237

drm/amd/display: fix incorrrect valid irq check

2021-07-20T14:16:04+00:00

commit e38ca7e422791a4d1c01e56dbf7f9982db0ed365 upstream. valid DAL irq should be < DAL_IRQ_SOURCES_NUMBER. Signed-off-by: Guchun Chen Reviewed-and-tested-by: Evan Quan Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/display: fix use_max_lb flag for 420 pixel formats

2021-07-20T14:15:59+00:00

[ Upstream commit 8809a7a4afe90ad9ffb42f72154d27e7c47551ae ] Right now the flag simply selects memory config 0 when flag is true however 420 modes benefit more from memory config 3. Signed-off-by: Dmytro Laktyushkin Reviewed-by: Aric Cyr Acked-by: Stylon Wang Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Disconnect non-DP with no EDID

2021-06-03T06:38:10+00:00

[ Upstream commit 080039273b126eeb0185a61c045893a25dbc046e ] [Why] Active DP dongles return no EDID when dongle is connected, but VGA display is taken out. Current driver behavior does not remove the active display when this happens, and this is a gap between dongle DTP and dongle behavior. [How] For active DP dongles and non-DP scenario, disconnect sink on detection when no EDID is read due to timeout. Signed-off-by: Chris Park Reviewed-by: Nicholas Kazlauskas Acked-by: Stylon Wang Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Guard against NULL pointer deref when get_i2c_info fails

2021-03-07T11:18:59+00:00

[ Upstream commit 44a09e3d95bd2b7b0c224100f78f335859c4e193 ] [Why] If the BIOS table is invalid or corrupt then get_i2c_info can fail and we dereference a NULL pointer. [How] Check that ddc_pin is not NULL before using it and log an error if it is because this is unexpected. Tested-by: Daniel Wheeler Signed-off-by: Nicholas Kazlauskas Reviewed-by: Eric Yang Acked-by: Anson Jacob Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Fix 10/12 bpc setup in DCE output bit depth reduction.

2021-03-04T08:39:39+00:00

[ Upstream commit 1916866dfa4aaceba1a70db83fde569387649d93 ] In set_clamp(), the comments and definitions for the COLOR_DEPTH_101010 and COLOR_DEPTH_121212 cases directly contradict the code comment which explains how this should work, whereas the COLOR_DEPTH_888 case is consistent with the code comments. Comment says the bitmask should be chosen to align to the top-most 10 or 12 MSB's on a 14 bit bus, but the implementation contradicts that: 10 bit case sets a mask for 12 bpc clamping, whereas 12 bit case sets a mask for 14 bpc clamping. Note that during my limited testing on DCE-8.3 (HDMI deep color) and DCE-11.2 (DP deep color), this didn't have any obvious ill effects, neither did fixing it change anything obvious for the better, so this fix may be inconsequential on DCE, and just reduce the confusion of innocent bystanders when reading the code and trying to investigate problems with 10 bpc+ output. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Mario Kleiner Cc: Harry Wentland Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Don't invoke kgdb_breakpoint() unconditionally

2020-11-05T10:08:52+00:00

commit 8b7dc1fe1a5c1093551f6cd7dfbb941bd9081c2e upstream. ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a kernel panic when no kdb stuff is attached, since the kgdb_breakpoint() call issues INT3. It's nothing but a surprise for normal end-users. For avoiding the pitfall, make the kgdb_breakpoint() call only when CONFIG_DEBUG_KERNEL_DC is set. https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: Acked-by: Alex Deucher Reviewed-by: Nicholas Kazlauskas Signed-off-by: Takashi Iwai Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/amd/display: HDMI remote sink need mode validation for Linux

2020-11-05T10:08:43+00:00

[ Upstream commit 95d620adb48f7728e67d82f56f756e8d451cf8d2 ] [Why] Currently mode validation is bypassed if remote sink exists. That leads to mode set issue when a BW bottle neck exists in the link path, e.g., a DP-to-HDMI converter that only supports HDMI 1.4. Any invalid mode passed to Linux user space will cause the modeset failure due to limitation of Linux user space implementation. [How] Mode validation is skipped only if in edid override. For real remote sink, clock limit check should be done for HDMI remote sink. Have HDMI related remote sink going through mode validation to elimiate modes which pixel clock exceeds BW limitation. Signed-off-by: Fangzhi Zuo Reviewed-by: Hersen Wu Acked-by: Eryk Brol Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Stop if retimer is not available

2020-10-01T11:14:36+00:00

[ Upstream commit a0e40018dcc3f59a10ca21d58f8ea8ceb1b035ac ] Raven provides retimer feature support that requires i2c interaction in order to make it work well, all settings required for this configuration are loaded from the Atom bios which include the i2c address. If the retimer feature is not available, we should abort the attempt to set this feature, otherwise, it makes the following line return I2C_CHANNEL_OPERATION_NO_RESPONSE: i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer)); ... if (!i2c_success) ASSERT(i2c_success); This ends up causing problems with hotplugging HDMI displays on Raven, and causes retimer settings to warn like so: WARNING: CPU: 1 PID: 429 at drivers/gpu/drm/amd/amdgpu/../dal/dc/core/dc_link.c:1998 write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Modules linked in: edac_mce_amd ccp kvm irqbypass binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi snd_hda_intel amdgpu(+) snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi aesni_intel snd_seq amd_iommu_v2 gpu_sched aes_x86_64 crypto_simd cryptd glue_helper snd_seq_device ttm drm_kms_helper snd_timer eeepc_wmi wmi_bmof asus_wmi sparse_keymap drm mxm_wmi snd k10temp fb_sys_fops syscopyarea sysfillrect sysimgblt soundcore joydev input_leds mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables x_tables autofs4 igb i2c_algo_bit hid_generic usbhid i2c_piix4 dca ahci hid libahci video wmi gpio_amdpt gpio_generic CPU: 1 PID: 429 Comm: systemd-udevd Tainted: G W 5.2.0-rc1sept162019+ #1 Hardware name: System manufacturer System Product Name/ROG STRIX B450-F GAMING, BIOS 2605 08/06/2019 RIP: 0010:write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Code: ff 0f b6 4d ce 44 0f b6 45 cf 44 0f b6 c8 45 89 cf 44 89 e2 48 c7 c6 f0 34 bc c0 bf 04 00 00 00 e8 63 b0 90 ff 45 84 ff 75 02 <0f> 0b 42 0f b6 04 73 8d 50 f6 80 fa 02 77 8c 3c 0a 0f 85 c8 00 00 RSP: 0018:ffffa99d02726fd0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa99d02727035 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff976acc857440 RBP: ffffa99d02727018 R08: 0000000000000002 R09: 000000000002a600 R10: ffffe90610193680 R11: 00000000000005e3 R12: 000000000000005d R13: ffff976ac4b201b8 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f14f99e1680(0000) GS:ffff976acc840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdf212843b8 CR3: 0000000408906000 CR4: 00000000003406e0 Call Trace: core_link_enable_stream+0x626/0x680 [amdgpu] dce110_apply_ctx_to_hw+0x414/0x4e0 [amdgpu] dc_commit_state+0x331/0x5e0 [amdgpu] ? drm_calc_timestamping_constants+0xf9/0x150 [drm] amdgpu_dm_atomic_commit_tail+0x395/0x1e00 [amdgpu] ? dm_plane_helper_prepare_fb+0x20c/0x280 [amdgpu] commit_tail+0x42/0x70 [drm_kms_helper] drm_atomic_helper_commit+0x10c/0x120 [drm_kms_helper] amdgpu_dm_atomic_commit+0x95/0xa0 [amdgpu] drm_atomic_commit+0x4a/0x50 [drm] restore_fbdev_mode_atomic+0x1c0/0x1e0 [drm_kms_helper] restore_fbdev_mode+0x4c/0x160 [drm_kms_helper] ? _cond_resched+0x19/0x40 drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_helper] drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper] fbcon_init+0x471/0x630 visual_init+0xd5/0x130 do_bind_con_driver+0x20a/0x430 do_take_over_console+0x7d/0x1b0 do_fbcon_takeover+0x5c/0xb0 fbcon_event_notify+0x6cd/0x8a0 notifier_call_chain+0x4c/0x70 blocking_notifier_call_chain+0x43/0x60 fb_notifier_call_chain+0x1b/0x20 register_framebuffer+0x254/0x360 __drm_fb_helper_initial_config_and_unlock+0x2c5/0x510 [drm_kms_helper] drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper] amdgpu_fbdev_init+0xcd/0x100 [amdgpu] amdgpu_device_init+0x1156/0x1930 [amdgpu] amdgpu_driver_load_kms+0x8d/0x2e0 [amdgpu] drm_dev_register+0x12b/0x1c0 [drm] amdgpu_pci_probe+0xd3/0x160 [amdgpu] local_pci_probe+0x47/0xa0 pci_device_probe+0x142/0x1b0 really_probe+0xf5/0x3d0 driver_probe_device+0x11b/0x130 device_driver_attach+0x58/0x60 __driver_attach+0xa3/0x140 ? device_driver_attach+0x60/0x60 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x74/0xb0 ? kmem_cache_alloc_trace+0x1a3/0x1c0 driver_attach+0x1e/0x20 bus_add_driver+0x147/0x220 ? 0xffffffffc0cb9000 driver_register+0x60/0x100 ? 0xffffffffc0cb9000 __pci_register_driver+0x5a/0x60 amdgpu_init+0x74/0x83 [amdgpu] do_one_initcall+0x4a/0x1fa ? _cond_resched+0x19/0x40 ? kmem_cache_alloc_trace+0x3f/0x1c0 ? __vunmap+0x1cc/0x200 do_init_module+0x5f/0x227 load_module+0x2330/0x2b40 __do_sys_finit_module+0xfc/0x120 ? __do_sys_finit_module+0xfc/0x120 __x64_sys_finit_module+0x1a/0x20 do_syscall_64+0x5a/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f14f9500839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff9bc4f5a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000055afb5abce30 RCX: 00007f14f9500839 RDX: 0000000000000000 RSI: 000055afb5ace0f0 RDI: 0000000000000017 RBP: 000055afb5ace0f0 R08: 0000000000000000 R09: 000000000000000a R10: 0000000000000017 R11: 0000000000000246 R12: 0000000000000000 R13: 000055afb5aad800 R14: 0000000000020000 R15: 0000000000000000 ---[ end trace c286e96563966f08 ]--- This commit reworks the way that we handle i2c write for retimer in the way that we abort this configuration if the feature is not available in the device. For debug sake, we kept a simple log message in case the retimer is not available. Signed-off-by: Rodrigo Siqueira Reviewed-by: Hersen Wu Acked-by: Rodrigo Siqueira Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: dal_ddc_i2c_payloads_create can fail causing panic

2020-10-01T11:14:35+00:00

[ Upstream commit 6a6c4a4d459ecacc9013c45dcbf2bc9747fdbdbd ] [Why] Since the i2c payload allocation can fail need to check return codes [How] Clean up i2c payload allocations and check for errors Signed-off-by: Aric Cyr Reviewed-by: Joshua Aberback Acked-by: Rodrigo Siqueira Acked-by: Harry Wentland Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: prevent memory leak

2020-08-05T08:06:00+00:00

[ Upstream commit 104c307147ad379617472dd91a5bcb368d72bd6d ] In dcn*_create_resource_pool the allocated memory should be released if construct pool fails. Reviewed-by: Harry Wentland Signed-off-by: Navid Emamdoost Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin