kernel/linux.git/drivers/gpu/drm/amd/display/dc/link, branch v6.12.81

drm/amd/display: Bump the HDMI clock to 340MHz

2026-01-23T10:18:47+00:00

commit fee50077656d8a58011f13bca48f743d1b6d6015 upstream. [Why] DP-HDMI dongles can execeed bandwidth requirements on high resolution monitors. This can lead to pruning the high resolution modes. HDMI 1.3 bumped the clock to 340MHz, but display code never matched it. [How] Set default to (DVI) 165MHz. Once HDMI display is identified update to 340MHz. Reported-by: Dianne Skoll Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4780 Reviewed-by: Chris Park Signed-off-by: Mario Limonciello Signed-off-by: Matthew Stewart Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ac1e65d8ade46c09fb184579b81acadf36dcb91e) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

Revert "drm/amd/display: Move setup_stream_attribute"

2025-12-06T21:24:57+00:00

commit 3126c9ccb4373d8758733c6699ba5ab93dbe5c9d upstream. This reverts commit 2681bf4ae8d24df950138b8c9ea9c271cd62e414. This results in a blank screen on the HDMI port on some systems. Revert for now so as not to regress 6.18, can be addressed in 6.19 once the issue is root caused. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4652 Cc: Sunpeng.Li@amd.com Cc: ivan.lipski@amd.com Signed-off-by: Alex Deucher (cherry picked from commit d0e9de7a81503cdde37fb2d37f1d102f9e0f38fb) Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Move sleep into each retry for retrieve_link_cap()

2025-12-01T10:43:28+00:00

commit 71ad9054c1f241be63f9d11df8cbd0aa0352fe16 upstream. [Why] When a monitor is booting it's possible that it isn't ready to retrieve link caps and this can lead to an EDID read failure: ``` [drm:retrieve_link_cap [amdgpu]] *ERROR* retrieve_link_cap: Read receiver caps dpcd data failed. amdgpu 0000:c5:00.0: [drm] *ERROR* No EDID read. ``` [How] Rather than msleep once and try a few times, msleep each time. Should be no changes for existing working monitors, but should correct reading caps on a monitor that is slow to boot. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 669dca37b3348a447db04bbdcbb3def94d5997cc) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Increase DPCD read retries

2025-12-01T10:43:28+00:00

commit 8612badc331bcab2068baefa69e1458085ed89e3 upstream. [Why] Empirical measurement of some monitors that fail to read EDID while booting shows that the number of retries with a 30ms delay between tries is as high as 16. [How] Increase number of retries to 20. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4672 Reviewed-by: Alex Hung Signed-off-by: Mario Limonciello (AMD) Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ad1c59ad7cf74ec06e32fe2c330ac1e957222288) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix black screen with HDMI outputs

2025-11-13T20:34:41+00:00

commit fdc93beeadc2439e5e85d056a8fe681dcced09da upstream. [Why & How] This fixes the black screen issue on certain APUs with HDMI, accompanied by the following messages: amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info frame on connector DP-1: -22 amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm] Cannot find any crtc or sizes Fixes: 489f0f600ce2 ("drm/amd/display: Fix DVI-D/HDMI adapters") Suggested-by: Timur Kristóf Reviewed-by: Harry Wentland Signed-off-by: Alex Hung Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 678c901443a6d2e909e3b51331a20f9d8f84ce82) Signed-off-by: Greg Kroah-Hartman

drm/amd/display: Fix DVI-D/HDMI adapters

2025-11-13T20:34:24+00:00

[ Upstream commit 489f0f600ce2c0dae640df9035e1d82677d2580f ] When the EDID has the HDMI bit, we should simply select the HDMI signal type even on DVI ports. For reference see, the legacy amdgpu display code: amdgpu_atombios_encoder_get_encoder_mode which selects ATOM_ENCODER_MODE_HDMI for the same case. This commit fixes DVI connectors to work with DVI-D/HDMI adapters so that they can now produce output over these connectors for HDMI monitors with higher bandwidth modes. With this change, even HDMI audio works through DVI. For testing, I used a CAA-DMDHFD3 DVI-D/HDMI adapter with the following GPUs: Tahiti (DCE 6) - DC can now output 4K 30 Hz over DVI Polaris 10 (DCE 11.2) - DC can now output 4K 60 Hz over DVI Signed-off-by: Timur Kristóf Acked-by: Alex Deucher Reviewed-by: Alex Hung Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Increase AUX Intra-Hop Done Max Wait Duration

2025-11-13T20:34:09+00:00

[ Upstream commit e3419e1e44b87d4176fb98679a77301b1ca40f63 ] [WHY] In the worst case, AUX intra-hop done can take hundreds of milliseconds as each retimer in a link might have to wait a full AUX_RD_INTERVAL to send LT abort downstream. [HOW] Wait 300ms for each retimer in a link to allow time to propagate a LT abort without infinitely waiting on intra-hop done. For no-retimer case, keep the max duration at 10ms. Reviewed-by: Wenjing Liu Signed-off-by: Michael Strauss Signed-off-by: Ivan Lipski Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Move setup_stream_attribute

2025-11-13T20:34:09+00:00

[ Upstream commit 2681bf4ae8d24df950138b8c9ea9c271cd62e414 ] [WHY] If symclk RCO is enabled, stream encoder may not be receiving an ungated clock by the time we attempt to set stream attributes when setting dpms on. Since the clock is gated, register writes to the stream encoder fail. [HOW] Move set_stream_attribute call into enable_stream, just after the point where symclk32_se is ungated. Logically there is no need to set stream attributes as early as is currently done in link_set_dpms_on, so this should have no impact beyond the RCO fix. Reviewed-by: Ovidiu (Ovi) Bunea Signed-off-by: Michael Strauss Signed-off-by: Ivan Lipski Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Avoid trying AUX transactions on disconnected ports

2025-08-20T16:30:39+00:00

[ Upstream commit deb24e64c8881c462b29e2c69afd9e6669058be5 ] [Why & How] Observe that we try to access DPCD 0x600h of disconnected DP ports. In order not to wasting time on retrying these ports, call dpcd_write_rx_power_ctrl() after checking its connection status. Reviewed-by: Aurabindo Pillai Signed-off-by: Wayne Lin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: fix link_set_dpms_off multi-display MST corner case

2025-06-04T12:43:52+00:00

[ Upstream commit 3c1a467372e0c356b1d3c59f6d199ed5a6612dd1 ] [Why & How] When MST config is unplugged/replugged too quickly, it can potentially result in a scenario where previous DC state has not been reset before the HPD link detection sequence begins. In this case, driver will disable the streams/link prior to re-enabling the link for link training. There is a bug in the current logic that does not account for the fact that current_state can be released and cleared prior to swapping to a new state (resulting in the pipe_ctx stream pointers to be cleared) in between disabling streams. To resolve this, cache the original streams prior to committing any stream updates. Reviewed-by: Wenjing Liu Signed-off-by: George Shen Signed-off-by: Ray Wu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher (cherry picked from commit 1561782686ccc36af844d55d31b44c938dd412dc) Signed-off-by: Sasha Levin