kernel/linux.git/drivers/gpu/drm/amd/display/dc/dce, branch v4.19.237

drm/amd/display: Fix 10/12 bpc setup in DCE output bit depth reduction.

2021-03-04T08:39:39+00:00

[ Upstream commit 1916866dfa4aaceba1a70db83fde569387649d93 ] In set_clamp(), the comments and definitions for the COLOR_DEPTH_101010 and COLOR_DEPTH_121212 cases directly contradict the code comment which explains how this should work, whereas the COLOR_DEPTH_888 case is consistent with the code comments. Comment says the bitmask should be chosen to align to the top-most 10 or 12 MSB's on a 14 bit bus, but the implementation contradicts that: 10 bit case sets a mask for 12 bpc clamping, whereas 12 bit case sets a mask for 14 bpc clamping. Note that during my limited testing on DCE-8.3 (HDMI deep color) and DCE-11.2 (DP deep color), this didn't have any obvious ill effects, neither did fixing it change anything obvious for the better, so this fix may be inconsequential on DCE, and just reduce the confusion of innocent bystanders when reading the code and trying to investigate problems with 10 bpc+ output. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Signed-off-by: Mario Kleiner Cc: Harry Wentland Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: support spdif

2019-10-07T16:56:57+00:00

[ Upstream commit b5a41620bb88efb9fb31a4fa5e652e3d5bead7d4 ] [Description] port spdif fix to staging: spdif hardwired to afmt inst 1. spdif func pointer spdif resource allocation (reserve last audio endpoint for spdif only) Signed-off-by: Charlene Liu Reviewed-by: Dmytro Laktyushkin Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Wait for backlight programming completion in set backlight level

2019-08-16T08:12:44+00:00

[ Upstream commit c7990daebe71d11a9e360b5c3b0ecd1846a3a4bb ] [WHY] Currently we don't wait for blacklight programming completion in DMCU when setting backlight level. Some sequences such as PSR static screen event trigger reprogramming requires it to be complete. [How] Add generic wait for dmcu command completion in set backlight level. Signed-off-by: SivapiriyanKumarasamy Reviewed-by: Anthony Koo Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Disable ABM before destroy ABM struct

2019-07-31T05:26:58+00:00

[ Upstream commit 1090d58d4815b1fcd95a80987391006c86398b4c ] [Why] When disable driver, OS will set backlight optimization then do stop device. But this flag will cause driver to enable ABM when driver disabled. [How] Send ABM disable command before destroy ABM construct Signed-off-by: Paul Hsieh Reviewed-by: Anthony Koo Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: extending AUX SW Timeout

2019-05-16T17:41:20+00:00

[ Upstream commit f4bbebf8e7eb4d294b040ab2d2ba71e70e69b930 ] [Why] AUX takes longer to reply when using active DP-DVI dongle on some asics resulting in up to 2000+ us edid read (timeout). [How] 1. Adjust AUX poll to match spec 2. Extend the SW timeout. This does not affect normal operation since we exit the loop as soon as AUX acks. Signed-off-by: Martin Leung Reviewed-by: Jun Lei Acked-by: Joshua Aberback Acked-by: Leo Li Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd/display: Raise dispclk value for dce120 by 15%

2018-11-21T08:19:10+00:00

[ Upstream commit 481f576c6c21bf0446eaa23623ef0262e9a5387c ] [Why] The DISPCLK value was previously requested to be 15% higher for all ASICs that went through the dce110 bandwidth code path. As part of a refactoring of dce_clocks and the dce110 set bandwidth codepath this was removed for power saving considerations. That change caused display corruption under certain hardware configurations with Vega10. [How] The 15% DISPCLK increase is brought back but only on dce110 for now. This is should be a temporary workaround until the root cause is sorted out for why this occurs on Vega (or other ASICs, if reported). Tested-by: Nick Sarnie Signed-off-by: Nicholas Kazlauskas Reviewed-by: Harry Wentland Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86"

2018-08-21T19:32:28+00:00

This reverts commit 8624c3c4dbfe24fc6740687236a2e196f5f4bfb0. We need CONFIG_DRM_AMD_DC_DCN1_0 to guard code that is using fp math. Acked-by: Alex Deucher Reviewed-by: Michel Dänzer Signed-off-by: Leo (Sunpeng) Li Signed-off-by: Alex Deucher

drm/amd/display: fix dentist did ranges

2018-08-21T19:16:43+00:00

Dentist did ranges were incomplete as max setting has an unusual divider step up of 66. Signed-off-by: Dmytro Laktyushkin Reviewed-by: Charlene Liu Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher

drm/amd/display: Pass connector id when executing VBIOS CT

2018-08-13T22:29:37+00:00

[why] Older ASICs require both phys_id and connector_id to execute bios command table. If we are not passing the right connector_id - it can lead to a black screen. [how] Set connector_obj_id when executing vbios command table Signed-off-by: Mikita Lipski Reviewed-by: Hersen Wu Acked-by: Leo Li Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amd/display: display connected to dp-1 does not light up

2018-08-06T20:57:51+00:00

[why] for vega, dp set_panel_mode is handled by psp firmware. dal should not program the register again. [how] dal does not program panel mode. Signed-off-by: Hersen Wu Reviewed-by: Charlene Liu Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher