kernel/linux.git/drivers/gpu/drm/amd/display/amdgpu_dm, branch v7.0-rc7

drm/amd/display: check if ext_caps is valid in BL setup

2026-03-24T17:53:46+00:00

LVDS connectors don't have extended backlight caps so check if the pointer is valid before accessing it. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5012 Fixes: 1454642960b0 ("drm/amd: Re-introduce property to control adaptive backlight modulation") Cc: Mario Limonciello Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alex Deucher (cherry picked from commit 3f797396d7f4eb9bb6eded184bbc6f033628a6f6) Cc: stable@vger.kernel.org

drm/amd/display: Fix drm_edid leak in amdgpu_dm

2026-03-23T18:48:32+00:00

[WHAT] When a sink is connected, aconnector->drm_edid was overwritten without freeing the previous allocation, causing a memory leak on resume. [HOW] Free the previous drm_edid before updating it. Reviewed-by: Roman Li Signed-off-by: Alex Hung Signed-off-by: Chuanyu Tseng Signed-off-by: Alex Deucher (cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5) Cc: stable@vger.kernel.org

drm/amd/display: Do not skip unrelated mode changes in DSC validation

2026-03-23T18:38:56+00:00

Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check"), amdgpu resets the CRTC state mode_changed flag to false when recomputing the DSC configuration results in no timing change for a particular stream. However, this is incorrect in scenarios where a change in MST/DSC configuration happens in the same KMS commit as another (unrelated) mode change. For example, the integrated panel of a laptop may be configured differently (e.g., HDR enabled/disabled) depending on whether external screens are attached. In this case, plugging in external DP-MST screens may result in the mode_changed flag being dropped incorrectly for the integrated panel if its DSC configuration did not change during precomputation in pre_validate_dsc(). At this point, however, dm_update_crtc_state() has already created new streams for CRTCs with DSC-independent mode changes. In turn, amdgpu_dm_commit_streams() will never release the old stream, resulting in a memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to the new stream either, which manifests as a use-after-free when the stream gets disabled later on: BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu] Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977 Workqueue: events drm_mode_rmfb_work_fn Call Trace: dump_stack_lvl+0x6e/0xa0 print_address_description.constprop.0+0x88/0x320 ? dc_stream_release+0x25/0x90 [amdgpu] print_report+0xfc/0x1ff ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x225/0x4e0 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_report+0xe1/0x180 ? dc_stream_release+0x25/0x90 [amdgpu] kasan_check_range+0x125/0x200 dc_stream_release+0x25/0x90 [amdgpu] dc_state_destruct+0x14d/0x5c0 [amdgpu] dc_state_release.part.0+0x4e/0x130 [amdgpu] dm_atomic_destroy_state+0x3f/0x70 [amdgpu] drm_atomic_state_default_clear+0x8ee/0xf30 ? drm_mode_object_put.part.0+0xb1/0x130 __drm_atomic_state_free+0x15c/0x2d0 atomic_remove_fb+0x67e/0x980 Since there is no reliable way of figuring out whether a CRTC has unrelated mode changes pending at the time of DSC validation, remember the value of the mode_changed flag from before the point where a CRTC was marked as potentially affected by a change in DSC configuration. Reset the mode_changed flag to this earlier value instead in pre_validate_dsc(). Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5004 Fixes: 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check") Signed-off-by: Yussuf Khalil Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher (cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)

drm/amd/display: Fix DisplayID not-found handling in parse_edid_displayid_vrr()

2026-03-17T16:15:49+00:00

parse_edid_displayid_vrr() searches the EDID extension blocks for a DisplayID extension before parsing the dynamic video timing range. The code previously checked whether edid_ext was NULL after the search loop. However, edid_ext is assigned during each iteration of the loop, so it will never be NULL once the loop has executed. If no DisplayID extension is found, edid_ext ends up pointing to the last extension block, and the NULL check does not correctly detect the failure case. Instead, check whether the loop completed without finding a matching DisplayID block by testing "i == edid->extensions". This ensures the function exits early when no DisplayID extension is present and avoids parsing an unrelated EDID extension block. Also simplify the EDID validation check using "!edid || !edid->extensions". Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:13079 parse_edid_displayid_vrr() warn: variable dereferenced before check 'edid_ext' (see line 13075) Fixes: a638b837d0e6 ("drm/amd/display: Fix refresh rate range for some panel") Cc: Roman Li Cc: Alex Hung Cc: Jerry Zuo Cc: Sun peng Li Cc: Tom Chung Cc: Dan Carpenter Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Tom Chung Signed-off-by: Alex Deucher (cherry picked from commit 91c7e6342e98c846b259c57273436fdea4c043f2)

drm/amd/display: Fix uninitialized variable use which breaks full LTO

2026-03-17T16:11:49+00:00

Commit e1b385726f7f ("drm/amd/display: Add additional checks for PSP footer size") introduced a use of an uninitialized stack variable in dm_dmub_sw_init() (region_params.bss_data_size). Interestingly, this seems to cause no issue on normal kernels. But when full LTO is enabled, it causes the compiler to "optimize" out huge swaths of amdgpu initialization code, and the driver is unusable: amdgpu 0000:03:00.0: [drm] Loading DMUB firmware via PSP: version=0x07002F00 amdgpu 0000:03:00.0: sw_init of IP block failed 5 amdgpu 0000:03:00.0: amdgpu_device_ip_init failed amdgpu 0000:03:00.0: Fatal error during GPU init It surprises me that neither gcc nor clang emit a warning about this: I only found it by bisecting the LTO breakage. Fix by using the bss_data_size field from fw_meta_info_params, as was presumably intended. Fixes: e1b385726f7f ("drm/amd/display: Add additional checks for PSP footer size") Signed-off-by: Calvin Owens Reviewed-by: Harry Wentland Reviewed-by: Nathan Chancellor Signed-off-by: Alex Deucher (cherry picked from commit b7f1402f6ad24cc6b9a01fa09ebd1c6559d787d0)

drm/amd/display: Fix gamma 2.2 colorop TFs

2026-03-17T16:08:46+00:00

Use GAMMA22 for degamma/blend and GAMMA22_INV for shaper so curves match the color pipeline. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5016 Tested-by: Xaver Hugl Reviewed-by: Melissa Wen Reviewed-by: Harry Wentland Signed-off-by: Alex Hung Signed-off-by: Alex Deucher (cherry picked from commit d8f9f42effd767ffa7bbcd7e05fbd6b20737e468)

drm/amd/display: Enable DEGAMMA and reject COLOR_PIPELINE+DEGAMMA_LUT

2026-03-02T22:13:13+00:00

[WHAT] Create DEGAMMA properties even if color pipeline is enabled, and enforce the mutual exclusion in atomic check by rejecting any commit that attempts to enable both COLOR_PIPELINE on the plane and DEGAMMA_LUT on the CRTC simultaneously. Fixes: 18a4127e9315 ("drm/amd/display: Disable CRTC degamma when color pipeline is enabled") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4963 Reviewed-by: Melissa Wen Reviewed-by: Harry Wentland Signed-off-by: Alex Hung Signed-off-by: Alex Deucher (cherry picked from commit 196a6aa727f1f15eb54dda5e60a41543ea9397ee)

drm/amd/display: Use mpc.preblend flag to indicate 3D LUT

2026-03-02T22:12:58+00:00

[WHAT] New ASIC's 3D LUT is indicated by mpc.preblend. Fixes: 0de2b1afea8d ("drm/amd/display: add 3D LUT colorop") Reviewed-by: Melissa Wen Reviewed-by: Harry Wentland Signed-off-by: Alex Hung Signed-off-by: Alex Deucher (cherry picked from commit 43175f6164d32cb96362d16e357689f74298145c)

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33+00:00

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00+00:00

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds