kernel/linux.git/drivers/gpu/drm/amd/amdgpu/amdgpu_eeprom.c, branch v6.12.80

drm/amdgpu: use u32 for buf size in __amdgpu_eeprom_xfer

2024-06-05T14:57:47+00:00

And also make sure the value of msg[1].len should be in the range of u16. Signed-off-by: Tao Zhou Reviewed-by: Yang Wang Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher

drm/amdgpu: update type of buf size to u32 for eeprom functions

2024-05-20T20:20:26+00:00

Avoid overflow issue. Signed-off-by: Tao Zhou Reviewed-by: Yang Wang Signed-off-by: Alex Deucher

drm/amdgpu: Fix unnecessary else after return in 'amdgpu_eeprom_xfer'

2023-07-27T18:59:29+00:00

Fixes the following: WARNING: else is not generally useful after a break or return + return -EINVAL; + } else { Cc: Guchun Chen Cc: Christian König Cc: Alex Deucher Signed-off-by: Srinivasan Shanmugam Reviewed-by: Guchun Chen Signed-off-by: Alex Deucher

drm/amdgpu: Allow non-standard EEPROM I2C address

2022-11-17T23:06:58+00:00

Allow non-standard EEPROM I2C address of 0x58, where the Device Type Identifier is 1011b, where we form 1011000b = 0x58 I2C address, as on some ASICs the FRU data lives there. Cc: Alex Deucher Cc: Kent Russell Signed-off-by: Luben Tuikov Tested-by: Kent Russell Reviewed-by: Kent Russell Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amdgpu: Remove redundant I2C EEPROM address

2022-11-09T22:41:42+00:00

Remove redundant EEPROM_I2C_MADDR_54H address, since we already have it represented (ARCTURUS), and since we don't include the I2C device type identifier in EEPROM memory addresses, i.e. that high up in the device abstraction--we only use EEPROM memory addresses, as memory is continuously represented by EEPROM device(s) on the I2C bus. Add a comment describing what these memory addresses are, how they come about and how they're usually extracted from the device address byte. Cc: Candice Li Cc: Tao Zhou Cc: Alex Deucher Fixes: c9bdc6c3cf39df ("drm/amdgpu: Add EEPROM I2C address support for ip discovery") Signed-off-by: Luben Tuikov Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amdgpu: Fix signedness bug in __amdgpu_eeprom_xfer()

2021-07-08T19:18:14+00:00

The i2c_transfer() function returns negatives or else the number of messages transferred. This code does not work because ARRAY_SIZE() is type size_t and so that means negative values of "r" are type promoted to high positive values which are greater than the ARRAY_SIZE(). Fix this by changing the < to != which works regardless of type promotion. Fixes: 746b584762e452 ("drm/amdgpu: Fixes to the AMDGPU EEPROM driver") Signed-off-by: Dan Carpenter Reviewed-by: Luben Tuikov Signed-off-by: Alex Deucher

drm/amdgpu: Optimize EEPROM RAS table I/O

2021-07-01T04:24:41+00:00

Split functionality between read and write, which simplifies the code and exposes areas of optimization and more or less complexity, and take advantage of that. Read and write the table in one go; use a separate stage to decode or encode the data, as opposed to on the fly, which keeps the I2C bus busy. Use a single read/write to read/write the table or at most two if the number of records we're reading/writing wraps around. Check the check-sum of a table in EEPROM on init. Update the checksum at the same time as when updating the table header signature, when the threshold was increased on boot. Take advantage of arithmetic modulo 256, that is, use a byte!, to greatly simplify checksum arithmetic. Cc: Alexander Deucher Cc: Andrey Grodzovsky Signed-off-by: Luben Tuikov Acked-by: Alexander Deucher Signed-off-by: Alex Deucher

drm/amdgpu: Return result fix in RAS

2021-07-01T04:24:41+00:00

The low level EEPROM write method, doesn't return 1, but the number of bytes written. Thus do not compare to 1, instead, compare to greater than 0 for success. Other cleanup: if the lower layers returned -errno, then return that, as opposed to overwriting the error code with one-fits-all -EINVAL. For instance, some return -EAGAIN. Cc: Jean Delvare Cc: Alexander Deucher Cc: Andrey Grodzovsky Cc: Lijo Lazar Cc: Stanley Yang Cc: Hawking Zhang Signed-off-by: Luben Tuikov Reviewed-by: Alexander Deucher Signed-off-by: Alex Deucher

drm/amdgpu: I2C EEPROM full memory addressing

2021-07-01T04:24:40+00:00

* "eeprom_addr" is now 32-bit wide. * Remove "slave_addr" from the I2C EEPROM driver interface. The I2C EEPROM Device Type Identifier is fixed at 1010b, and the rest of the bits of the Device Address Byte/Device Select Code, are memory address bits, where the first three of those bits are the hardware selection bits. All this is now a 19-bit address and passed as "eeprom_addr". This abstracts the I2C bus for EEPROM devices for this I2C EEPROM driver. Now clients only pass the 19-bit EEPROM memory address, to the I2C EEPROM driver, as the 32-bit "eeprom_addr", from which they want to read from or write to. Cc: Jean Delvare Cc: Alexander Deucher Cc: Andrey Grodzovsky Cc: Lijo Lazar Cc: Stanley Yang Cc: Hawking Zhang Signed-off-by: Luben Tuikov Acked-by: Alexander Deucher Signed-off-by: Alex Deucher

drm/amdgpu: EEPROM respects I2C quirks

2021-07-01T04:24:40+00:00

Consult the i2c_adapter.quirks table for the maximum read/write data length per bus transaction. Do not exceed this transaction limit. Cc: Jean Delvare Cc: Alexander Deucher Cc: Andrey Grodzovsky Cc: Lijo Lazar Cc: Stanley Yang Cc: Hawking Zhang Signed-off-by: Luben Tuikov Acked-by: Alexander Deucher Signed-off-by: Alex Deucher