kernel/linux.git/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c, branch v6.5.12

drm/amd: Fix detection of _PR3 on the PCIe root port

2023-10-10T20:02:57+00:00

commit 134b8c5d8674e7cde380f82e9aedfd46dcdd16f7 upstream. On some systems with Navi3x dGPU will attempt to use BACO for runtime PM but fails to resume properly. This is because on these systems the root port goes into D3cold which is incompatible with BACO. This happens because in this case dGPU is connected to a bridge between root port which causes BOCO detection logic to fail. Fix the intent of the logic by looking at root port, not the immediate upstream bridge for _PR3. Cc: stable@vger.kernel.org Suggested-by: Jun Ma Tested-by: David Perry Fixes: b10c1c5b3a4e ("drm/amdgpu: add check for ACPI power resources") Signed-off-by: Mario Limonciello Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

Revert "drm/amd: Disable S/G for APUs when 64GB or more host memory"

2023-09-23T09:14:35+00:00

commit 169ed4ece8373f02f10642eae5240e3d1ef5c038 upstream. This reverts commit 70e64c4d522b732e31c6475a3be2349de337d321. Since, we now have an actual fix for this issue, we can get rid of this workaround as it can cause pin failures if enough VRAM isn't carved out by the BIOS. Cc: stable@vger.kernel.org # 6.1+ Acked-by: Harry Wentland Reviewed-by: Alex Deucher Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: avoid integer overflow warning in amdgpu_device_resize_fb_bar()

2023-09-13T07:53:16+00:00

[ Upstream commit 822130b5e8834ab30ad410cf19a582e5014b9a85 ] On 32-bit architectures comparing a resource against a value larger than U32_MAX can cause a warning: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1344:18: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] res->start > 0x100000000ull) ~~~~~~~~~~ ^ ~~~~~~~~~~~~~~ As gcc does not warn about this in dead code, add an IS_ENABLED() check at the start of the function. This will always return success but not actually resize the BAR on 32-bit architectures without high memory, which is exactly what we want here, as the driver can fall back to bank switching the VRAM access. Fixes: 31b8adab3247 ("drm/amdgpu: require a root bus window above 4GB for BAR resize") Reviewed-by: Christian König Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin

drm/amd: flush any delayed gfxoff on suspend entry

2023-08-16T19:46:39+00:00

DCN 3.1.4 is reported to hang on s2idle entry if graphics activity is happening during entry. This is because GFXOFF was scheduled as delayed but RLC gets disabled in s2idle entry sequence which will hang GFX IP if not already in GFXOFF. To help this problem, flush any delayed work for GFXOFF early in s2idle entry sequence to ensure that it's off when RLC is changed. commit 4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during suspend without delay") modified power gating flow so that if called in s0ix that it ensured that GFXOFF wasn't put in work queue but instead processed immediately. This is dead code due to commit 10cb67eb8a1b ("drm/amdgpu: skip CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly called as part of the suspend entry code. Remove that dead code. Signed-off-by: Mario Limonciello Signed-off-by: Tim Huang Reviewed-by: Lijo Lazar Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org

drm/amdgpu: disable mcbp if parameter zero is set

2023-08-16T19:46:33+00:00

The parameter amdgpu_mcbp shall have priority against the default value calculated from the chip version. User could disable mcbp by setting the parameter mcbp as zero. v2: do not trigger preemption in sw ring muxer when mcbp is disabled. Signed-off-by: Jiadong Zhu Acked-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amd: Disable S/G for APUs when 64GB or more host memory

2023-08-09T14:34:01+00:00

Users report a white flickering screen on multiple systems that is tied to having 64GB or more memory. When S/G is enabled pages will get pinned to both VRAM carve out and system RAM leading to this. Until it can be fixed properly, disable S/G when 64GB of memory or more is detected. This will force pages to be pinned into VRAM. This should fix white screen flickers but if VRAM pressure is encountered may lead to black screens. It's a trade-off for now. Fixes: 81d0bcf99009 ("drm/amdgpu: make display pinning more flexible (v2)") Cc: Hamza Mahfooz Cc: Roman Li Cc: # 6.1.y: bf0207e172703 ("drm/amdgpu: add S/G display parameter") Cc: # 6.4.y Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354 Signed-off-by: Mario Limonciello Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher

drm/amd: Move helper for dynamic speed switch check out of smu13

2023-07-12T16:09:54+00:00

This helper is used for checking if the connected host supports the feature, it can be moved into generic code to be used by other smu implementations as well. Signed-off-by: Mario Limonciello Reviewed-by: Evan Quan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org # 6.1.x

drm/amdgpu: enable mcbp by default on gfx9

2023-06-30T17:12:15+00:00

It's required for high priority queues. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535 Reviewed-and-tested-by: Jiadong Zhu Signed-off-by: Alex Deucher

drm/amdgpu: make mcbp a per device setting

2023-06-30T17:12:14+00:00

So we can selectively enable it on certain devices. No intended functional change. Reviewed-and-tested-by: Jiadong Zhu Signed-off-by: Alex Deucher

drm/amdgpu: Add vbios attribute only if supported

2023-06-23T19:35:26+00:00

Not all devices carry VBIOS version information. Add the device attribute only if supported. Signed-off-by: Lijo Lazar Reviewed-by: Le Ma Signed-off-by: Alex Deucher