kernel/linux.git/drivers/gpu/drm/Kconfig, branch v5.1.16

drm/cma-helper: Remove unused fbdev code

2019-01-17T09:56:38+00:00

CMA helper drivers have been converted to drm_fbdev_generic_setup() so the fbdev code can be removed. v3: Remove CMA specific conditional in the generic fbdev client v2: Clean up the includes some more (Laurent) Cc: Laurent Pinchart Signed-off-by: Noralf Trønnes Acked-by: Sam Ravnborg Reviewed-by: Laurent Pinchart Link: https://patchwork.freedesktop.org/patch/msgid/20190114121059.20704-1-noralf@tronnes.org

drm/fb_helper: Allow leaking fbdev smem_start

2018-10-03T19:08:21+00:00

Since "drm/fb: Stop leaking physical address", the default behaviour of the DRM fbdev emulation is to set the smem_base to 0 and pass the new FBINFO_HIDE_SMEM_START flag. The main reason is to avoid leaking physical addresse to user-space, and it follows a general move over the kernel code to avoid user-space to manipulate physical addresses and then use some other mechanisms like dma-buf to transfer physical buffer handles over multiple subsystems. But, a lot of devices depends on closed sources binaries to enable OpenGL hardware acceleration that uses this smem_start value to pass physical addresses to out-of-tree modules in order to render into these physical adresses. These should use dma-buf buffers allocated from the DRM display device instead and stop relying on fbdev overallocation to gather DMA memory (some HW vendors delivers GBM and Wayland capable binaries, but older unsupported devices won't have these new binaries and are doomed until an Open Source solution like Lima finalizes). Since these devices heavily depends on this kind of software and because the smem_start population was available for years, it's a breakage to stop leaking smem_start without any alternative solutions. This patch adds a Kconfig depending on the EXPERT config and an unsafe kernel module parameter tainting the kernel when enabled. A clear comment and Kconfig help text was added to clarify why and when this patch should be reverted, but in the meantime it's a necessary feature to keep. Cc: Dave Airlie Cc: Daniel Vetter Cc: Bartlomiej Zolnierkiewicz Cc: Noralf Trønnes Cc: Maxime Ripard Cc: Eric Anholt Cc: Lucas Stach Cc: Rob Clark Cc: Ben Skeggs Cc: Christian König Signed-off-by: Neil Armstrong Reviewed-by: Maxime Ripard Tested-by: Maxime Ripard Acked-by: Daniel Vetter Acked-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com

drm/amdgpu: Merge amdkfd into amdgpu

2018-08-28T16:22:42+00:00

Since KFD is only supported by single GPU driver, it makes sense to merge amdgpu and amdkfd into one module. This patch is the initial step: merge Kconfig and Makefile. v2: also remove kfd from drm Kconfig Signed-off-by: Amber Lin Acked-by: Christian König Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher

drm: add support for DisplayPort CEC-Tunneling-over-AUX

2018-07-13T14:58:19+00:00

This adds support for the DisplayPort CEC-Tunneling-over-AUX feature that is part of the DisplayPort 1.3 standard. Unfortunately, not all DisplayPort/USB-C to HDMI adapters with a chip that has this capability actually hook up the CEC pin, so even though a CEC device is created, it may not actually work. Signed-off-by: Hans Verkuil Reviewed-by: Ville Syrjälä Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180711132909.25409-2-hverkuil@xs4all.nl

drm: vkms: select DRM_KMS_HELPER

2018-07-09T16:46:05+00:00

Without this, we get link errors during randconfig build: drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa0): undefined reference to `drm_atomic_helper_check' drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa8): undefined reference to `drm_atomic_helper_commit' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x0): undefined reference to `drm_atomic_helper_update_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x8): undefined reference to `drm_atomic_helper_disable_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x18): undefined reference to `drm_atomic_helper_plane_reset' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x28): undefined reference to `drm_atomic_helper_plane_duplicate_state' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x30): undefined reference to `drm_atomic_helper_plane_destroy_state' drivers/gpu/drm/vkms/vkms_output.o:(.rodata+0x1c0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x40): undefined reference to `drm_atomic_helper_crtc_reset' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x70): undefined reference to `drm_atomic_helper_set_config' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x78): undefined reference to `drm_atomic_helper_page_flip' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x90): undefined reference to `drm_atomic_helper_crtc_duplicate_state' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x98): undefined reference to `drm_atomic_helper_crtc_destroy_state' Fixes: 854502fa0a38 ("drm/vkms: Add basic CRTC initialization") Fixes: 1c7c5fd916a0 ("drm/vkms: Introduce basic VKMS driver") Signed-off-by: Arnd Bergmann Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180709154901.1989316-1-arnd@arndb.de

drm/vkms: Add extra information about vkms

2018-07-05T12:46:33+00:00

Add the following additional information: authors and description in Kconfig. Signed-off-by: Rodrigo Siqueira Reviewed-by: Haneen Mohammed Signed-off-by: Daniel Vetter Signed-off-by: Gustavo Padovan Link: https://patchwork.freedesktop.org/patch/msgid/180770375b0537f1ba1857bdb7fdc71dd201882e.1526514457.git.rodrigosiqueiramelo@gmail.com

drm/vkms: Introduce basic VKMS driver

2018-07-05T12:45:56+00:00

This patch introduces Virtual Kernel Mode-Setting (VKMS) driver. It creates a very basic kms driver with 1 crtc/encoder/connector/plane. VKMS driver would be useful for testing, or for running X (or similar) on headless machines and be able to still use the GPU. Thus it enables a virtual display without the need for hardware display capability. Signed-off-by: Haneen Mohammed Signed-off-by: Daniel Vetter Signed-off-by: Gustavo Padovan Link: https://patchwork.freedesktop.org/patch/msgid/20180514143346.GA21695@haneen-vb

drm/selftests: Add drm helper selftest

2018-05-04T09:36:45+00:00

Signed-off-by: Maarten Lankhorst Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-6-maarten.lankhorst@linux.intel.com Acked-by: Daniel Vetter

drm/selftests: Rename the Kconfig option to CONFIG_DRM_DEBUG_SELFTEST

2018-05-04T09:36:34+00:00

We want to add more DRM selftests, and there's not much point in having a Kconfig option for every single one of them, so make a generic one. Signed-off-by: Maarten Lankhorst Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180503112217.37292-5-maarten.lankhorst@linux.intel.com [mlankhorst: Fix i915/Kconfig.debug (ickle)] Acked-by: Chris Wilson Acked-by: Daniel Vetter

drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+

2018-05-03T23:26:30+00:00

This driver will be used to support Mesa on the Broadcom 7268 and 7278 platforms. V3D 3.3 introduces an MMU, which means we no longer need CMA or vc4's complicated CL/shader validation scheme. This massively changes the GEM behavior, so I've forked off to a new driver. v2: Mark SUBMIT_CL as needing DRM_AUTH. coccinelle fixes from kbuild test robot. Drop personal git link from MAINTAINERS. Don't double-map dma-buf imported BOs. Add kerneldoc about needing MMU eviction. Drop prime vmap/unmap stubs. Delay mmap offset setup to mmap time. Use drm_dev_init instead of _alloc. Use ktime_get() for wait_bo timeouts. Drop drm_can_sleep() usage, since we don't modeset. Switch page tables back to WC (debug change to coherent had slipped in). Switch drm_gem_object_unreference_unlocked() to drm_gem_object_put_unlocked(). Simplify overflow mem handling by not sharing overflow mem between jobs. v3: no changes v4: align submit_cl to 64 bits (review by airlied), check zero flags in other ioctls. Signed-off-by: Eric Anholt Acked-by: Daniel Vetter (v4) Acked-by: Dave Airlie (v3, requested submit_cl change) Link: https://patchwork.freedesktop.org/patch/msgid/20180430181058.30181-3-eric@anholt.net