kernel/linux.git/drivers/gpio, branch v6.18.36

gpio: rockchip: fix generic IRQ chip leak on remove

2026-06-19T11:43:59+00:00

[ Upstream commit 1c1e0fc88d6ef65bf15d517853251f75ab9d18c3 ] The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe. However, on driver remove/teardown, the generic chips are not automatically freed when the IRQ domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global gc_list and may later be visited by generic IRQ chip suspend, resume, or shutdown callbacks after the GPIO bank has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by explicitly calling irq_domain_remove_generic_chips() before removing the IRQ domain in rockchip_gpio_remove(). Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi Link: https://patch.msgid.link/20260607230504.35392-2-scardracs@disroot.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: zynq: fix runtime PM leak on remove

2026-06-19T11:43:59+00:00

[ Upstream commit 6edb934de9bda3b7abcec856eaee6fc8b4278dd1 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error. zynq_gpio_remove() uses it to keep the controller active while removing the GPIO chip, but never drops the usage counter again. Balance the get with pm_runtime_put_noidle() after disabling runtime PM. Fixes: 3242ba117e9b ("gpio: Add driver for Zynq GPIO controller") Signed-off-by: Ruoyu Wang Link: https://patch.msgid.link/20260609073313.5-1-ruoyuw560@gmail.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: mvebu: fix NULL pointer dereference in suspend/resume

2026-06-19T11:43:58+00:00

[ Upstream commit b9ad50d7505ebd48282ec3630258dc820fc85c81 ] mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [] lr : [] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Yun Zhou Link: https://patch.msgid.link/20260608084334.2960803-1-yun.zhou@windriver.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: rockchip: teardown bugs and resource leaks

2026-06-09T10:28:31+00:00

[ Upstream commit 9500077678230e36d22bf16d2b9539c13e59a801 ] Address several teardown issues and resource leaks in the driver's remove path and error handling: 1. Debounce clock reference leak: The debounce clock (bank->db_clk) is obtained using of_clk_get() which increments the clock's reference count, but clk_put() is never called. Register a devm action to cleanly release it on unbind. Note that of_clk_get(..., 1) remains necessary over devm_clk_get() because the DT binding does not define clock-names, precluding name-based lookup. 2. Unregistered chained IRQ handler: The chained IRQ handler is not disconnected in remove(). If a stray interrupt fires after the driver is removed, the kernel attempts to execute a stale handler, leading to a panic. Fix this by clearing the handler in remove(). 3. IRQ domain leak: The linear IRQ domain and its generic chips are allocated manually during probe but never removed. Remove the IRQ domain during driver teardown to free the associated generic chips and mappings. Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi Link: https://patch.msgid.link/20260526171050.12785-3-scardracs@disroot.org [Bartosz: don't emit an error message on devres allocation failure] Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: rockchip: convert bank->clk to devm_clk_get_enabled()

2026-06-09T10:28:31+00:00

[ Upstream commit 3e46c18d5d87f063a93ae0fe7662fbf6660459d5 ] The bank->clk was previously obtained via of_clk_get() and manually prepared/enabled. However, it was missing a corresponding clk_put() in both the error paths and the remove function, leading to a reference leak. Convert the allocation to devm_clk_get_enabled(), which also properly propagates failures from clk_prepare_enable() that were previously ignored. The GPIO bank device uses the same OF node as the previous of_clk_get() call, so devm_clk_get_enabled(dev, NULL) correctly resolves the same clock provider entry. Fix the reference leak and simplify the code by removing the manual clk_disable_unprepare() calls in the probe error paths and in the remove function. Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi Link: https://patch.msgid.link/20260526171050.12785-2-scardracs@disroot.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: virtuser: Fix uninitialized data bug in gpio_virtuser_direction_do_write()

2026-06-09T10:28:31+00:00

[ Upstream commit 8a122b5e72cc0043705f0d524bcd15f0c0b3ec15 ] If *ppos is non-zero (user-space write split over multiple calls to write()) then simple_write_to_buffer() won't initialize the start of the buffer. Really, non-zero values for *ppos aren't going to work at all. Check for that and return -EINVAL at the start of the function. Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API") Signed-off-by: Dan Carpenter Link: https://patch.msgid.link/ahP3BJWWy-m_qI0X@stanley.mountain Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: adnp: fix flow control regression caused by scoped_guard()

2026-06-09T10:28:31+00:00

[ Upstream commit a5c627d90809b793fc053849b3a00609db305776 ] scoped_guard() is implemented as a for loop. Using it to protect code using the continue statement changes the flow as we now only break out of the hidden loop inside scoped_guard(), not the original for loop. Use a regular code block instead. Fixes: c7fe19ed3973 ("gpio: adnp: use lock guards for the I2C lock") Reported-by: David Lechner Closes: https://lore.kernel.org/all/cde2abb2-4cc8-4fc9-b34a-0c5d2b95779f@baylibre.com/ Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260522073527.9812-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: mxc: fix irq_high handling

2026-06-09T10:28:26+00:00

[ Upstream commit dac917ed5aead741004db8d0d5151dd577802df8 ] If port->irq_high is -1 (fsl,imx21-gpio compatible) and gpio_idx is >= 16 enable_irq_wake() is called with -1 which is wrong. Fixes: 5f6d1998adeb ("gpio: mxc: release the parent IRQ in runtime suspend") Signed-off-by: Alexander Stein Reviewed-by: Frank Li Link: https://patch.msgid.link/20260526063504.25916-1-alexander.stein@ew.tq-group.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: aggregator: lock device when calling device_is_bound()

2026-06-01T15:51:07+00:00

[ Upstream commit 598a2b3e2e0e6aa2e9f7843c96c45b5ea11e0411 ] The kerneldoc for device_is_bound() says it must be called with the device lock taken. Add missing synchronization to this driver. Fixes: 3a27f40b4570 ("gpio: aggregator: stop using dev-sync-probe") Link: https://patch.msgid.link/20260518-gpio-dev-lock-v1-2-cc4736f3ff0b@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: aggregator: remove the software node when deactivating the aggregator

2026-06-01T15:51:07+00:00

[ Upstream commit 61fef83f239ecace1cce716135762a2d9b7b1fc6 ] The dynamic software node we create for the aggregator platform device when using configfs is leaked when the device is deactivated. Destroy it as the last step in the tear-down path. Fixes: 86f162e73d2d ("gpio: aggregator: introduce basic configfs interface") Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/all/CAMuHMdVZ=XUvJTGdDAjnkxgtw7Uvnn61iOy3XN_5XNZM2anctw@mail.gmail.com/ Link: https://patch.msgid.link/20260520121631.33976-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin