kernel/linux.git/drivers/gpio, branch v6.18.34

gpio: aggregator: lock device when calling device_is_bound()

2026-06-01T15:51:07+00:00

[ Upstream commit 598a2b3e2e0e6aa2e9f7843c96c45b5ea11e0411 ] The kerneldoc for device_is_bound() says it must be called with the device lock taken. Add missing synchronization to this driver. Fixes: 3a27f40b4570 ("gpio: aggregator: stop using dev-sync-probe") Link: https://patch.msgid.link/20260518-gpio-dev-lock-v1-2-cc4736f3ff0b@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: aggregator: remove the software node when deactivating the aggregator

2026-06-01T15:51:07+00:00

[ Upstream commit 61fef83f239ecace1cce716135762a2d9b7b1fc6 ] The dynamic software node we create for the aggregator platform device when using configfs is leaked when the device is deactivated. Destroy it as the last step in the tear-down path. Fixes: 86f162e73d2d ("gpio: aggregator: introduce basic configfs interface") Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/all/CAMuHMdVZ=XUvJTGdDAjnkxgtw7Uvnn61iOy3XN_5XNZM2anctw@mail.gmail.com/ Link: https://patch.msgid.link/20260520121631.33976-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: aggregator: stop using dev-sync-probe

2026-06-01T15:51:07+00:00

[ Upstream commit 3a27f40b457053e6112a63d14590e4a3ff553b44 ] dev-err-probe is an overengineered solution to a simple problem. Use a combination of wait_for_probe() and device_is_bound() to synchronously wait for the platform device to probe. Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-2-efac254f1a1d@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Stable-dep-of: 61fef83f239e ("gpio: aggregator: remove the software node when deactivating the aggregator") Signed-off-by: Sasha Levin

gpio: aggregator: fix a potential use-after-free

2026-06-01T15:51:06+00:00

[ Upstream commit 30c073cab97afb31901f94de9605177b6b84367e ] On error we free aggr->lookups->dev_id before removing the entry from the lookup table. If a concurrent thread calls gpiod_find() before we remove the entry, it could iterate over the list and call gpiod_match_lookup_table() which unconditionally dereferences dev_id when calling strcmp(). Reverse the order of cleanup. Fixes: 86f162e73d2d ("gpio: aggregator: introduce basic configfs interface") Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260520084911.27938-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: cdev: check if uAPI v2 config attributes are correctly zeroed

2026-06-01T15:51:06+00:00

[ Upstream commit 3e6ccd790ed69bedd3d9626d01dd35cf9821c121 ] We check the padding of other uAPI v2 structures but not that of line config attributes. For used attributes: check if their padding is zeroed, for unused: check if the entire structure is zeroed. Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Reviewed-by: Kent Gibson Link: https://patch.msgid.link/20260521-gpio-cdev-attr-padding-check-v3-1-ec3bcbe2e358@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: of: clear OF_POPULATED on hog nodes in remove path

2026-05-14T13:30:17+00:00

commit bbee90e750262bfb406d66dc65c46d616d2b6673 upstream. The previously set OF_POPULATED flag should be cleared on the hog nodes when removing the chip. Cc: stable@vger.kernel.org Fixes: 63636d956c455 ("gpio: of: Add DT overlay support for GPIO hogs") Acked-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-1-4e61f3dbf06a@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman

gpio: tegra: fix irq_release_resources calling enable instead of disable

2026-04-22T11:22:24+00:00

[ Upstream commit 1561d96f5f55c1bca9ff047ace5813f4f244eea6 ] tegra_gpio_irq_release_resources() erroneously calls tegra_gpio_enable() instead of tegra_gpio_disable(). When IRQ resources are released, the GPIO configuration bit (CNF) should be cleared to deconfigure the pin as a GPIO. Leaving it enabled wastes power and can cause unexpected behavior if the pin is later reused for an alternate function via pinctrl. Fixes: 66fecef5bde0 ("gpio: tegra: Convert to gpio_irq_chip") Signed-off-by: Samasth Norway Ananda Link: https://patch.msgid.link/20260407210247.1737938-1-samasth.norway.ananda@oracle.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()

2026-04-11T12:26:47+00:00

commit 16fdabe143fce2cbf89139677728e17e21b46c28 upstream. Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"), `gdev->dev.release` is unset. As a result, the reference count to `gdev->dev` isn't dropped on the error handling paths. Drop the reference on errors. Also reorder the instructions to make the error handling simpler. Now gpiochip_add_data_with_key() roughly looks like: >>> Some memory allocation. Go to ERR ZONE 1 on errors. >>> device_initialize(). gpiodev_release() takes over the responsibility for freeing the resources of `gdev->dev`. The subsequent error handling paths shouldn't go through ERR ZONE 1 again which leads to double free. >>> Some initialization mainly on `gdev`. >>> The rest of initialization. Go to ERR ZONE 2 on errors. >>> Chip registration success and exit. >>> ERR ZONE 2. gpio_device_put() and exit. >>> ERR ZONE 1. Cc: stable@vger.kernel.org Fixes: aab5c6f20023 ("gpio: set device type for GPIO chips") Reviewed-by: Linus Walleij Signed-off-by: Tzung-Bi Shih Link: https://patch.msgid.link/20260205092840.2574840-1-tzungbi@kernel.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman

gpio: mxc: map Both Edge pad wakeup to Rising Edge

2026-04-11T12:26:47+00:00

commit c720fb57d56274213d027b3c5ab99080cf62a306 upstream. Suspend may fail on i.MX8QM when Falling Edge is used as a pad wakeup trigger due to a hardware bug in the detection logic. Since the hardware does not support Both Edge wakeup, remap requests for Both Edge to Rising Edge by default to avoid hitting this issue. A warning is emitted when Falling Edge is selected on i.MX8QM. Fixes: f60c9eac54af ("gpio: mxc: enable pad wakeup on i.MX8x platforms") cc: stable@vger.kernel.org Reviewed-by: Peng Fan Signed-off-by: Shenwei Wang Link: https://patch.msgid.link/20260324192129.2797237-1-shenwei.wang@nxp.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman

gpiolib: clear requested flag if line is invalid

2026-04-11T12:26:30+00:00

[ Upstream commit 6df6ea4b3d1567dbe6442f308735c23b63007c7f ] If `gpiochip_line_is_valid()` fails, then `-EINVAL` is returned, but `desc->flags` will have `GPIOD_FLAG_REQUESTED` set, which will result in subsequent calls misleadingly returning `-EBUSY`. Fix that by clearing the flag in case of failure. Fixes: a501624864f3 ("gpio: Respect valid_mask when requesting GPIOs") Signed-off-by: Barnabás Pőcze Reviewed-by: Matti Vaittinen Link: https://patch.msgid.link/20260310204359.1202451-1-pobrn@protonmail.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin