kernel/linux.git/drivers/gpio, branch v6.12.94

gpio: zynq: fix runtime PM leak on remove

2026-06-19T11:42:24+00:00

[ Upstream commit 6edb934de9bda3b7abcec856eaee6fc8b4278dd1 ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error. zynq_gpio_remove() uses it to keep the controller active while removing the GPIO chip, but never drops the usage counter again. Balance the get with pm_runtime_put_noidle() after disabling runtime PM. Fixes: 3242ba117e9b ("gpio: Add driver for Zynq GPIO controller") Signed-off-by: Ruoyu Wang Link: https://patch.msgid.link/20260609073313.5-1-ruoyuw560@gmail.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: mvebu: fix NULL pointer dereference in suspend/resume

2026-06-19T11:42:23+00:00

[ Upstream commit b9ad50d7505ebd48282ec3630258dc820fc85c81 ] mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [] lr : [] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Yun Zhou Link: https://patch.msgid.link/20260608084334.2960803-1-yun.zhou@windriver.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: rockchip: convert bank->clk to devm_clk_get_enabled()

2026-06-09T10:25:44+00:00

[ Upstream commit 3e46c18d5d87f063a93ae0fe7662fbf6660459d5 ] The bank->clk was previously obtained via of_clk_get() and manually prepared/enabled. However, it was missing a corresponding clk_put() in both the error paths and the remove function, leading to a reference leak. Convert the allocation to devm_clk_get_enabled(), which also properly propagates failures from clk_prepare_enable() that were previously ignored. The GPIO bank device uses the same OF node as the previous of_clk_get() call, so devm_clk_get_enabled(dev, NULL) correctly resolves the same clock provider entry. Fix the reference leak and simplify the code by removing the manual clk_disable_unprepare() calls in the probe error paths and in the remove function. Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Marco Scardovi Link: https://patch.msgid.link/20260526171050.12785-2-scardracs@disroot.org Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: virtuser: Fix uninitialized data bug in gpio_virtuser_direction_do_write()

2026-06-09T10:25:44+00:00

[ Upstream commit 8a122b5e72cc0043705f0d524bcd15f0c0b3ec15 ] If *ppos is non-zero (user-space write split over multiple calls to write()) then simple_write_to_buffer() won't initialize the start of the buffer. Really, non-zero values for *ppos aren't going to work at all. Check for that and return -EINVAL at the start of the function. Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API") Signed-off-by: Dan Carpenter Link: https://patch.msgid.link/ahP3BJWWy-m_qI0X@stanley.mountain Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: mxc: fix irq_high handling

2026-06-09T10:25:40+00:00

[ Upstream commit dac917ed5aead741004db8d0d5151dd577802df8 ] If port->irq_high is -1 (fsl,imx21-gpio compatible) and gpio_idx is >= 16 enable_irq_wake() is called with -1 which is wrong. Fixes: 5f6d1998adeb ("gpio: mxc: release the parent IRQ in runtime suspend") Signed-off-by: Alexander Stein Reviewed-by: Frank Li Link: https://patch.msgid.link/20260526063504.25916-1-alexander.stein@ew.tq-group.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: cdev: check if uAPI v2 config attributes are correctly zeroed

2026-06-01T15:46:32+00:00

[ Upstream commit 3e6ccd790ed69bedd3d9626d01dd35cf9821c121 ] We check the padding of other uAPI v2 structures but not that of line config attributes. For used attributes: check if their padding is zeroed, for unused: check if the entire structure is zeroed. Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Reviewed-by: Kent Gibson Link: https://patch.msgid.link/20260521-gpio-cdev-attr-padding-check-v3-1-ec3bcbe2e358@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n)

2026-06-01T15:46:32+00:00

[ Upstream commit e106b1dd38e723ec2bb2bf57ea9b2aff464b9423 ] Use the mem_is_zero() helper where possible. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20241110201706.16614-1-andy.shevchenko@gmail.com Signed-off-by: Bartosz Golaszewski Stable-dep-of: 3e6ccd790ed6 ("gpio: cdev: check if uAPI v2 config attributes are correctly zeroed") Signed-off-by: Sasha Levin

gpio: of: clear OF_POPULATED on hog nodes in remove path

2026-05-14T13:29:22+00:00

commit bbee90e750262bfb406d66dc65c46d616d2b6673 upstream. The previously set OF_POPULATED flag should be cleared on the hog nodes when removing the chip. Cc: stable@vger.kernel.org Fixes: 63636d956c455 ("gpio: of: Add DT overlay support for GPIO hogs") Acked-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-1-4e61f3dbf06a@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman

gpiolib: fix race condition for gdev->srcu

2026-04-22T11:19:01+00:00

[ Upstream commit a7ac22d53d0990152b108c3f4fe30df45fcb0181 ] If two drivers were calling gpiochip_add_data_with_key(), one may be traversing the srcu-protected list in gpio_name_to_desc(), meanwhile other has just added its gdev in gpiodev_add_to_list_unlocked(). This creates a non-mutexed and non-protected timeframe, when one instance is dereferencing and using &gdev->srcu, before the other has initialized it, resulting in crash: [ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000 [ 4.943396] Mem abort info: [ 4.943400] ESR = 0x0000000096000005 [ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.943407] SET = 0, FnV = 0 [ 4.943410] EA = 0, S1PTW = 0 [ 4.943413] FSC = 0x05: level 1 translation fault [ 4.943416] Data abort info: [ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000 [ 4.961449] [ffff800272bcc000] pgd=0000000000000000 [ 4.969203] , p4d=1000000039739003 [ 4.979730] , pud=0000000000000000 [ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset" [ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP ... [ 5.121359] pc : __srcu_read_lock+0x44/0x98 [ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0 [ 5.153671] sp : ffff8000833bb430 [ 5.298440] [ 5.298443] Call trace: [ 5.298445] __srcu_read_lock+0x44/0x98 [ 5.309484] gpio_name_to_desc+0x60/0x1a0 [ 5.320692] gpiochip_add_data_with_key+0x488/0xf00 5.946419] ---[ end trace 0000000000000000 ]--- Move initialization code for gdev fields before it is added to gpio_devices, with adjacent initialization code. Adjust goto statements to reflect modified order of operations Fixes: 47d8b4c1d868 ("gpio: add SRCU infrastructure to struct gpio_device") Reviewed-by: Jakub Lewalski Signed-off-by: Paweł Narewski [Bartosz: fixed a build issue, removed stray newline] Link: https://lore.kernel.org/r/20251224082641.10769-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski [missing commit fcc8b637c542 ("gpiolib: switch the line state notifier to atomic"), commit dcb73cbaaeb3 ("gpio: cdev: use raw notifier for line state events") and commit d4f335b410dd ("gpiolib: rename GPIO chip printk macros") in 6.12.y. Both notifiers as well as both srcu inits are moved before the scoped_guard, following same logic as in a7ac22d53d09. Rest is changes to git context only.] Cc: stable@vger.kernel.org # 6.12 Signed-off-by: Quentin Schulz Signed-off-by: Sasha Levin

gpiolib: unify two loops initializing GPIO descriptors

2026-04-22T11:19:01+00:00

[ Upstream commit fa17f749ee5bc6afdaa9e0ddbe6a816b490dad7d ] We currently iterate over the descriptors owned by the GPIO device we're adding twice with the first loop just setting the gdev pointer. It's not used anywhere between this and the second loop so just drop the first one and move the assignment to the second. Reviewed-by: Kent Gibson Link: https://lore.kernel.org/r/20241004-gpio-notify-in-kernel-events-v1-2-8ac29e1df4fe@linaro.org Signed-off-by: Bartosz Golaszewski Cc: stable@vger.kernel.org # 6.12 Signed-off-by: Quentin Schulz Signed-off-by: Sasha Levin