kernel/linux.git/drivers/gpio, branch v5.15.7

gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors

2021-11-25T08:48:36+00:00

[ Upstream commit d6912b1251b47e6b04ea8c8881dfb35a6e7a3e29 ] gpio-rockchip uses interfaces that are provided by the Kconfig symbol GENERIC_IRQ_CHIP, so the driver should select that symbol in order to prevent build errors. Fixes these build errors (and more): aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_disable': gpio-rockchip.c:(.text+0x454): undefined reference to `irq_gc_mask_set_bit' aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_enable': gpio-rockchip.c:(.text+0x478): undefined reference to `irq_gc_mask_clr_bit' aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_interrupts_register': gpio-rockchip.c:(.text+0x518): undefined reference to `irq_generic_chip_ops' aarch64-linux-ld: gpio-rockchip.c:(.text+0x594): undefined reference to `__irq_alloc_domain_generic_chips' aarch64-linux-ld: gpio-rockchip.c:(.text+0x5cc): undefined reference to `irq_get_domain_generic_chip' aarch64-linux-ld: gpio-rockchip.c:(.text+0x5e0): undefined reference to `irq_gc_ack_set_bit' aarch64-linux-ld: gpio-rockchip.c:(.text+0x604): undefined reference to `irq_gc_set_wake' Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: realtek-otto: fix GPIO line IRQ offset

2021-11-18T18:17:04+00:00

[ Upstream commit 585a07079909ba9061ddd88214c36653e1aef71a ] The irqchip uses one domain for all GPIO lines, so the line offset should be determined w.r.t. the first line of the first port, not the first line of the triggered port. Fixes: 0d82fb1127fb ("gpio: Add Realtek Otto GPIO support") Signed-off-by: Sander Vanheule Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: mlxbf2.c: Add check for bgpio_init failure

2021-10-25T08:15:05+00:00

Add a check if bgpio_init fails. Signed-off-by: Asmaa Mnebhi Signed-off-by: Bartosz Golaszewski

gpio: xgs-iproc: fix parsing of ngpios property

2021-10-25T08:10:37+00:00

of_property_read_u32 returns 0 on success, not true, so we need to invert the check to actually take over the provided ngpio value. Fixes: 6a41b6c5fc20 ("gpio: Add xgs-iproc driver") Signed-off-by: Jonas Gorski Reviewed-by: Chris Packham Reviewed-by: Florian Fainelli Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski

gpio: mockup: Convert to use software nodes

2021-10-06T11:04:04+00:00

The gpio-mockup driver creates the properties that are shared between platform and GPIO devices. Because of that, the properties may not be removed at the proper point of time without provoking a use-after-free as shown in the following backtrace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 103 at lib/refcount.c:28 refcount_warn_saturate+0xd1/0x120 ... Call Trace: kobject_put+0xdc/0xf0 software_node_notify_remove+0xa8/0xc0 device_del+0x15a/0x3e0 That's why the driver has to manage the lifetime of the software nodes by itself. The problem originates from the old device_add_properties() API, but has been only revealed after the commit bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()"). Hence, it's used as a landmark for backporting. Fixes: bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()") Reported-by: Kent Gibson Tested-by: Kent Gibson Signed-off-by: Andy Shevchenko [Bartosz: tweaked local variable placement] Signed-off-by: Bartosz Golaszewski

gpio: pca953x: Improve bias setting

2021-10-06T11:01:45+00:00

The commit 15add06841a3 ("gpio: pca953x: add ->set_config implementation") introduced support for bias setting. However this, due to being half-baked, brought potential issues: - the turning bias via disabling makes the pin floating for a while; - once enabled, bias can't be disabled. Fix all these by adding support for bias disabling and move the disabling part under the corresponding conditional. While at it, add support for default setting, since it's cheap to add. Fixes: 15add06841a3 ("gpio: pca953x: add ->set_config implementation") Cc: Thomas Petazzoni Signed-off-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski

gpio: 74x164: Add SPI device ID table

2021-10-06T11:01:45+00:00

Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski

Merge tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2021-09-30T19:11:35+00:00

Pull gpio fixes from Bartosz Golaszewski: "A single fix for the gpio-pca953x driver and two commits updating the MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself (treewide after a change in professional situation). Summary: - don't ignore I2C errors in gpio-pca953x - update MAINTAINERS entries for Mun Yew Tham and myself" * tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer MAINTAINERS: update my email address gpio: pca953x: do not ignore i2c errors

gpio: pca953x: do not ignore i2c errors

2021-09-29T18:40:15+00:00

Per gpio_chip interface, error shall be proparated to the caller. Attempt to silent diagnostics by returning zero (as written in the comment) is plain wrong, because the zero return can be interpreted by the caller as the gpio value. Cc: stable@vger.kernel.org Signed-off-by: Andrey Gusakov Signed-off-by: Nikita Yushchenko Signed-off-by: Bartosz Golaszewski

Merge tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

2021-09-28T23:10:42+00:00

Pull pin control fixes from Linus Walleij: "Some few pin control fixes for the v5.15 kernel cycle. The most critical is the AMD fixes. - Fix wakeup interrupts in the AMD driver affecting AMD laptops. - Fix parent irqspec translation in the Qualcomm SPMI GPIO driver. - Fix deferred probe handling in the Rockchip driver, this is a stopgap solution while we look for something more elegant. - Add PM suspend callbacks to the Qualcomm SC7280 driver. - Some minor doc fix (should have come in earlier, sorry)" * tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: sc7280: Add PM suspend callbacks gpio/rockchip: fetch deferred output settings on probe pinctrl/rockchip: add a queue for deferred pin output settings on probe pinctrl: qcom: spmi-gpio: correct parent irqspec translation pinctrl: amd: Handle wake-up interrupt pinctrl: amd: Add irq field data pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()