kernel/linux.git/drivers/gpio, branch v4.14.286

MIPS: Remove repetitive increase irq_err_count

2022-07-02T14:18:08+00:00

[ Upstream commit c81aba8fde2aee4f5778ebab3a1d51bd2ef48e4c ] commit 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd325dace ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by: k2ci Signed-off-by: huhai Signed-off-by: Genjian Zhang Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

gpio: mvebu/pwm: Refuse requests with inverted polarity

2022-05-25T06:41:21+00:00

[ Upstream commit 3ecb10175b1f776f076553c24e2689e42953fef5 ] The driver doesn't take struct pwm_state::polarity into account when configuring the hardware, so refuse requests for inverted polarity. Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Uwe Kleine-König Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpio: gpio-vf610: do not touch other bits when set the target bit

2022-05-25T06:41:21+00:00

[ Upstream commit 9bf3ac466faa83d51a8fe9212131701e58fdef74 ] For gpio controller contain register PDDR, when set one target bit, current logic will clear all other bits, this is wrong. Use operator '|=' to fix it. Fixes: 659d8a62311f ("gpio: vf610: add imx7ulp support") Reviewed-by: Peng Fan Signed-off-by: Haibo Chen Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpiolib: acpi: use correct format characters

2022-04-20T07:08:31+00:00

[ Upstream commit 213d266ebfb1621aab79cfe63388facc520a1381 ] When compiling with -Wformat, clang emits the following warning: gpiolib-acpi.c:393:4: warning: format specifies type 'unsigned char' but the argument has type 'int' [-Wformat] pin); ^~~ So warning that '%hhX' is paired with an 'int' is all just completely mindless and wrong. Sadly, I can see a different bogus warning reason why people would want to use '%02hhX'. Again, the *sane* thing from a human perspective is to use '%02X. But if the compiler doesn't do any range analysis at all, it could decide that "Oh, that print format could need up to 8 bytes of space in the result". Using '%02hhX' would cut that down to two. And since we use char ev_name[5]; and currently use "_%c%02hhX" as the format string, even a compiler that doesn't notice that "pin <= 255" test that guards this all will go "OK, that's at most 4 bytes and the final NUL termination, so it's fine". While a compiler - like gcc - that only sees that the original source of the 'pin' value is a 'unsigned short' array, and then doesn't take the "pin <= 255" into account, will warn like this: gpiolib-acpi.c: In function 'acpi_gpiochip_request_interrupt': gpiolib-acpi.c:206:24: warning: '%02X' directive writing between 2 and 4 bytes into a region of size 3 [-Wformat-overflow=] sprintf(ev_name, "_%c%02X", ^~~~ gpiolib-acpi.c:206:20: note: directive argument in the range [0, 65535] because gcc isn't being very good at that argument range analysis either. In other words, the original use of 'hhx' was bogus to begin with, and due to *another* compiler warning being bad, and we had that bad code being written back in 2016 to work around _that_ compiler warning (commit e40a3ae1f794: "gpio: acpi: work around false-positive -Wstring-overflow warning"). Sadly, two different bad compiler warnings together does not make for one good one. It just makes for even more pain. End result: I think the simplest and cleanest option is simply the proposed change which undoes that '%hhX' change for gcc, and replaces it with just using a slightly bigger stack allocation. It's not like a 5-byte allocation is in any way likely to have saved any actual stack, since all the other variables in that function are 'int' or bigger. False-positive compiler warnings really do make people write worse code, and that's a problem. But on a scale of bad code, I feel that extending the buffer trivially is better than adding a pointless cast that literally makes no sense. At least in this case the end result isn't unreadable or buggy. We've had several cases of bad compiler warnings that caused changes that were actually horrendously wrong. Fixes: e40a3ae1f794 ("gpio: acpi: work around false-positive -Wstring-overflow warning") Signed-off-by: Linus Torvalds Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

gpio: ts4900: Do not set DAT and OE together

2022-03-16T11:57:07+00:00

[ Upstream commit 03fe003547975680fdb9ff5ab0e41cb68276c4f2 ] This works around an issue with the hardware where both OE and DAT are exposed in the same register. If both are updated simultaneously, the harware makes no guarantees that OE or DAT will actually change in any given order and may result in a glitch of a few ns on a GPIO pin when changing direction and value in a single write. Setting direction to input now only affects OE bit. Setting direction to output updates DAT first, then OE. Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support") Signed-off-by: Mark Featherston Signed-off-by: Kris Bahnsen Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpiolib: acpi: Do not set the IRQ type if the IRQ is already in use

2022-01-27T08:00:54+00:00

[ Upstream commit bdfd6ab8fdccd8b138837efff66f4a1911496378 ] If the IRQ is already in use, then acpi_dev_gpio_irq_get_by() really should not change the type underneath the current owner. I specifically hit an issue with this an a Chuwi Hi8 Super (CWI509) Bay Trail tablet, when the Boot OS selection in the BIOS is set to Android. In this case _STA for a MAX17047 ACPI I2C device wrongly returns 0xf and the _CRS resources for this device include a GpioInt pointing to a GPIO already in use by an _AEI handler, with a different type then specified in the _CRS for the MAX17047 device. Leading to the acpi_dev_gpio_irq_get() call done by the i2c-core-acpi.c code changing the type breaking the _AEI handler. Now this clearly is a bug in the DSDT of this tablet (in Android mode), but in general calling irq_set_irq_type() on an IRQ which already is in use seems like a bad idea. Signed-off-by: Hans de Goede Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

gpio: zynq: Check return value of pm_runtime_get_sync

2021-07-20T14:17:50+00:00

[ Upstream commit a51b2fb94b04ab71e53a71b9fad03fa826941254 ] Return value of "pm_runtime_get_sync" API was neither captured nor checked. Fixed it by capturing the return value and then checking for any warning. Addresses-Coverity: "check_return" Signed-off-by: Srinivas Neeli Signed-off-by: Bartosz Golaszewski Signed-off-by: Sasha Levin

gpiolib: acpi: Add quirk to ignore EC wakeups on Dell Venue 10 Pro 5055

2021-05-22T08:57:42+00:00

[ Upstream commit da91ece226729c76f60708efc275ebd4716ad089 ] Like some other Bay and Cherry Trail SoC based devices the Dell Venue 10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to report events instead of using the standard ACPI EC interface for this. The EC interrupt is only used to report battery-level changes and it keeps doing this while the system is suspended, causing the system to not stay suspended. Add an ignore-wake quirk for the GPIO pin used by the EC to fix the spurious wakeups from suspend. Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

gpiolib: acpi: Add missing IRQF_ONESHOT

2021-03-30T12:40:08+00:00

[ Upstream commit 6e5d5791730b55a1f987e1db84b078b91eb49e99 ] fixed the following coccicheck: ./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Make sure threaded IRQs without a primary handler are always request with IRQF_ONESHOT Reported-by: Abaci Robot Signed-off-by: Yang Li Acked-by: Andy Shevchenko Signed-off-by: Andy Shevchenko Signed-off-by: Sasha Levin

gpio: pcf857x: Fix missing first interrupt

2021-03-03T17:22:55+00:00

commit a8002a35935aaefcd6a42ad3289f62bab947f2ca upstream. If no n_latch value will be provided at driver probe then all pins will be used as an input: gpio->out = ~n_latch; In that case initial state for all pins is "one": gpio->status = gpio->out; So if pcf857x IRQ happens with change pin value from "zero" to "one" then we miss it, because of "one" from IRQ and "one" from initial state leaves corresponding pin unchanged: change = (gpio->status ^ status) & gpio->irq_enabled; The right solution will be to read actual state at driver probe. Cc: stable@vger.kernel.org Fixes: 6e20a0a429bd ("gpio: pcf857x: enable gpio_to_irq() support") Signed-off-by: Maxim Kiselev Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman