kernel/linux.git/drivers/gpio/Makefile, branch v6.19.11

Merge tag 'gpio/shared-gpios-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git into gpio/for-next

2025-11-17T09:37:37+00:00

Immutable branch between the GPIO, ASoC and regulator trees for v6.19-rc1 Add better support for GPIOs shared by multiple consumers.

gpio: shared-proxy: implement the shared GPIO proxy driver

2025-11-17T09:16:51+00:00

Add a virtual GPIO proxy driver which arbitrates access to a single shared GPIO by multiple users. It works together with the core shared GPIO support from GPIOLIB and functions by acquiring a reference to a shared GPIO descriptor exposed by gpiolib-shared and making sure that the state of the GPIO stays consistent. In general: if there's only one user at the moment: allow it to do anything as if this was a normal GPIO (in essence: just propagate calls to the underlying real hardware driver). If there are more users: don't allow to change the direction set by the initial user, allow to change configuration options but warn about possible conflicts and finally: treat the output-high value as a reference counted, logical "GPIO enabled" setting, meaning: the GPIO value is set to high when the first user requests it to be high and back to low once the last user stops "voting" for high. Reviewed-by: Linus Walleij Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-4-b51f97b1abd8@linaro.org Signed-off-by: Bartosz Golaszewski

gpiolib: implement low-level, shared GPIO support

2025-11-17T09:16:51+00:00

This module scans the device tree (for now only OF nodes are supported but care is taken to make other fwnode implementations easy to integrate) and determines which GPIO lines are shared by multiple users. It stores that information in memory. When the GPIO chip exposing shared lines is registered, the shared GPIO descriptors it exposes are marked as shared and virtual "proxy" devices that mediate access to the shared lines are created. When a consumer of a shared GPIO looks it up, its fwnode lookup is redirected to a just-in-time machine lookup that points to this proxy device. This code can be compiled out on platforms which don't use shared GPIOs. Reviewed-by: Linus Walleij Acked-by: Linus Walleij Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-3-b51f97b1abd8@linaro.org Signed-off-by: Bartosz Golaszewski

gpio: add QIXIS FPGA GPIO controller

2025-10-16T10:04:48+00:00

Add support for the GPIO controller found on some QIXIS FPGAs in Layerscape boards such as LX2160ARDB and LS1046AQDS. This driver is using gpio-regmap. A GPIO controller has a maximum of 8 lines (all found in the same register). Even within the same controller, the GPIO lines' direction is fixed, which mean that both input and output lines are found in the same register. This is why the driver also passed to gpio-regmap the newly added .fixed_direction_output bitmap to represent the true direction of the lines. Signed-off-by: Ioana Ciornei Reviewed-by: Frank Li Reviewed-by: Linus Walleij Acked-by: Bartosz Golaszewski Reviewed-by: Michael Walle # for the gpio-regmap part Signed-off-by: Bartosz Golaszewski

Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2025-10-04T23:07:08+00:00

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It was another normal development cycle, with lots of the usual drivers getting updates: - Thunderbolt driver cleanups and additions - dwc3 driver updates - dwc2 driver updates - typec driver updates - xhci driver updates and additions - offload USB engine updates for better power management - unused tracepoint removals - usb gadget fixes and updates as more users start to rely on these drivers instead of the "old" function gadget drivers - new USB device ids - other minor driver USB driver updates - new USB I/O driver framework and driver additions" The last item, the usb i/o driver, has an i2c and gpio driver added through this tree. Those drivers were acked by the respective subsystem maintainers. All of these have been in linux-next for a while" * tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits) usb: vhci-hcd: Prevent suspending virtually attached devices USB: serial: option: add SIMCom 8230C compositions thunderbolt: Fix use-after-free in tb_dp_dprx_work usb: xhci: align PORTSC trace with one-based port numbering usb: xhci: correct indentation for PORTSC tracing function usb: xhci: improve TR Dequeue Pointer mask usb: xhci-pci: add support for hosts with zero USB3 ports usb: xhci: Update a comment about Stop Endpoint retries Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running" usb: gadget: f_rndis: Refactor bind path to use __free() usb: gadget: f_ecm: Refactor bind path to use __free() usb: gadget: f_acm: Refactor bind path to use __free() usb: gadget: f_ncm: Refactor bind path to use __free() usb: gadget: Introduce free_usb_request helper usb: gadget: Store endpoint pointer in usb_request usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv usb: host: xhci-rcar: Move R-Car reg definitions dt-bindings: usb: Document Renesas RZ/G3E USB3HOST usb: gadget: f_fs: Fix epfile null pointer access after ep enable. ...

Merge tag 'ib-mfd-gpio-input-pinctrl-pwm-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next

2025-09-18T10:39:22+00:00

Pull changes from the immutable branch between MFD, GPIO, Input, Pinctrl and PWM trees containing the GPIO driver for max7360.

gpio: max7360: Add MAX7360 gpio support

2025-09-16T14:24:48+00:00

Add driver for Maxim Integrated MAX7360 GPIO/GPO controller. Two sets of GPIOs are provided by the device: - Up to 8 GPIOs, shared with the PWM and rotary encoder functionalities. These GPIOs also provide interrupts on input changes. - Up to 6 GPOs, on unused keypad columns pins. Co-developed-by: Kamel Bouhara Signed-off-by: Kamel Bouhara Acked-by: Bartosz Golaszewski Reviewed-by: Andy Shevchenko Signed-off-by: Mathieu Dubois-Briand Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-7-435cfda2b1ea@bootlin.com Signed-off-by: Lee Jones

gpio: Add Nuvoton NCT6694 GPIO support

2025-09-16T13:41:57+00:00

This driver supports GPIO and IRQ functionality for NCT6694 MFD device based on USB interface. Reviewed-by: Linus Walleij Acked-by: Bartosz Golaszewski Signed-off-by: Ming Yu Link: https://lore.kernel.org/r/20250912091952.1169369-3-a0282524688@gmail.com Signed-off-by: Lee Jones

gpio: Add Intel USBIO GPIO driver

2025-09-12T12:05:10+00:00

Add a a driver for the GPIO auxbus child device of the Intel USBIO USB IO-expander used by the MIPI cameras on various new (Meteor Lake and later) Intel laptops. Reviewed-by: Linus Walleij Acked-by: Bartosz Golaszewski Co-developed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Israel Cepeda Link: https://lore.kernel.org/r/20250911181343.77398-3-hansg@kernel.org Signed-off-by: Greg Kroah-Hartman

gpiolib: make legacy interfaces optional

2025-07-24T14:24:49+00:00

The traditional interfaces are only used on a small number of ancient boards. Make these optional now so they can be disabled by default. Signed-off-by: Arnd Bergmann Reviewed-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20250722153634.3683927-1-arnd@kernel.org Signed-off-by: Bartosz Golaszewski