kernel/linux.git/drivers/fpga, branch v4.14.263

fpga: altera-ps-spi: Fix getting of optional confd gpio

2019-09-21T05:15:32+00:00

[ Upstream commit dec43da46f63eb71f519d963ba6832838e4262a3 ] Currently the driver does not handle EPROBE_DEFER for the confd gpio. Use devm_gpiod_get_optional() instead of devm_gpiod_get() and return error codes from altera_ps_probe(). Fixes: 5692fae0742d ("fpga manager: Add altera-ps-spi driver for Altera FPGAs") Signed-off-by: Phil Reid Signed-off-by: Moritz Fischer Signed-off-by: Sasha Levin

fpga-manager: altera-ps-spi: Fix build error

2019-07-31T05:28:57+00:00

commit 3d139703d397f6281368047ba7ad1c8bf95aa8ab upstream. If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y, build fails: drivers/fpga/altera-ps-spi.o: In function `altera_ps_write': altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table' Select BITREVERSE to fix this. Reported-by: Hulk Robot Fixes: fcfe18f885f6 ("fpga-manager: altera-ps-spi: use bitrev8x4") Signed-off-by: YueHaibing Cc: stable Acked-by: Moritz Fischer Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman

fpga: altera-cvp: Fix registration for CvP incapable devices

2019-02-12T18:45:58+00:00

[ Upstream commit 68f60538daa4bc3da5d0764d46f391916fba20fd ] The probe function needs to verify the CvP enable bit in order to properly determine if FPGA Manager functionality can be safely enabled. Fixes: 34d1dc17ce97 ("fpga manager: Add Altera CvP driver") Signed-off-by: Andreas Puhm Signed-off-by: Anatolij Gustschin Reviewed-by: Moritz Fischer Acked-by: Alan Tull Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

fpga-manager: altera-ps-spi: preserve nCONFIG state

2018-05-01T19:58:24+00:00

commit 881c93c0fb73328845898344208fa0bf0d62cac6 upstream. If the driver module is loaded when FPGA is configured, the FPGA is reset because nconfig is pulled low (low-active gpio inited with GPIOD_OUT_HIGH activates the signal which means setting its value to low). Init nconfig with GPIOD_OUT_LOW to prevent this. Signed-off-by: Anatolij Gustschin Acked-by: Alan Tull Signed-off-by: Moritz Fischer Cc: stable # 4.14+ Signed-off-by: Greg Kroah-Hartman

fpga: region: release of_parse_phandle nodes after use

2018-02-07T19:12:26+00:00

commit 0f5eb1545907edeea7672a9c1652c4231150ff22 upstream. Both fpga_region_get_manager() and fpga_region_get_bridges() call of_parse_phandle(), but nothing calls of_node_put() on the returned struct device_node pointers. Make sure to do that to stop their reference counters getting out of whack. Fixes: 0fa20cdfcc1f ("fpga: fpga-region: device tree control for FPGA") Signed-off-by: Ian Abbott Signed-off-by: Alan Tull Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

fpga: altera-cvp: remove DRIVER_ATTR() usage

2017-09-19T07:20:33+00:00

It's better to be explicit and use the DRIVER_ATTR_RW() macro when defining a driver's sysfs file. This is part of a series to drop DRIVER_ATTR() from the tree entirely. Cc: linux-fpga@vger.kernel.org Reviewed-by: Moritz Fischer Acked-by: Alan Tull Signed-off-by: Greg Kroah-Hartman

fpga: altera-hps2fpga: fix multiple init of l3_remap_lock

2017-08-10T21:27:55+00:00

The global spinlock `l3_remap_lock` is reinitialized every time the "probe" function `alt_fpga_bridge_probe()` is called. It should only be initialized once. Use `DEFINE_SPINLOCK()` to initialize it statically. Fixes: e5f8efa5c8bf ("ARM: socfpga: fpga bridge driver support") Cc: # 4.10+ Signed-off-by: Ian Abbott Reviewed-By: Moritz Fischer Signed-off-by: Alan Tull Signed-off-by: Greg Kroah-Hartman

fpga: altera-hps2fpga: add NULL check on of_match_device() return value

2017-08-10T21:27:55+00:00

Check return value from call to of_match_device() in order to prevent a NULL pointer dereference. In case of NULL print error message and return -ENODEV Signed-off-by: Gustavo A. R. Silva Reviewed-by: Moritz Fischer Signed-off-by: Alan Tull Signed-off-by: Greg Kroah-Hartman

ARM: socfpga: explicitly request exclusive reset control

2017-08-10T21:27:55+00:00

Commit a53e35db70d1 ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Cc: Alan Tull Cc: Moritz Fischer Cc: linux-fpga@vger.kernel.org Signed-off-by: Philipp Zabel Acked-By: Moritz Fischer Signed-off-by: Alan Tull Signed-off-by: Greg Kroah-Hartman