kernel/linux.git/drivers/firmware, branch v6.1.175

firmware: arm_ffa: Skip free_pages on RX buffer alloc failure

2026-06-01T15:39:38+00:00

[ Upstream commit 09527e2c534911619d7e098729711100290bc3e1 ] If the RX buffer allocation fails in ffa_init(), the error path jumps to free_pages even though no buffer has been allocated yet. Route that case directly to free_drv_info so the cleanup path is only used after at least one RX/TX buffer allocation has succeeded. Fixes: 3bbfe9871005 ("firmware: arm_ffa: Add initial Arm FFA driver support") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-2-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_ffa: Check for NULL FF-A ID table while driver registration

2026-06-01T15:39:38+00:00

[ Upstream commit 0a5e695095c557d2380131b613dea4e8d90371be ] The bus match callback assumes that every FF-A driver provides an id_table and dereferences it unconditionally. Enforce that contract at registration time so a buggy client driver cannot crash the bus during match. Fixes: 92743071464f ("firmware: arm_ffa: Ensure drivers provide a probe function") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-1-8595ae450034@kernel.org Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

efi/capsule-loader: fix incorrect sizeof in phys array reallocation

2026-06-01T15:39:14+00:00

[ Upstream commit 48a428215782321b56956974f23593e40ce84b7a ] The krealloc() call for cap_info->phys in __efi_capsule_setup_info() uses sizeof(phys_addr_t *) instead of sizeof(phys_addr_t), which might be causing an undersized allocation. The allocation is also inconsistent with the initial array allocation in efi_capsule_open() that allocates one entry with sizeof(phys_addr_t), and the efi_capsule_write() function that stores phys_addr_t values (not pointers) via page_to_phys(). On 64-bit systems where sizeof(phys_addr_t) == sizeof(phys_addr_t *), this goes unnoticed. On 32-bit systems with PAE where phys_addr_t is 64-bit but pointers are 32-bit, this allocates half the required space, which might lead to a heap buffer overflow when storing physical addresses. This is similar to the bug fixed in commit fccfa646ef36 ("efi/capsule-loader: fix incorrect allocation size") which fixed the same issue at the initial allocation site. Fixes: f24c4d478013 ("efi/capsule-loader: Reinstate virtual capsule mapping") Assisted-by: Claude:claude-sonnet-4-5 Signed-off-by: Thomas Huth Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin

pmdomain: imx: scu-pd: Fix device_node reference leak during ->probe()

2026-06-01T15:39:11+00:00

[ Upstream commit c8e9b6a55702be6c6d034e973d519c52c3848415 ] When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In imx_sc_pd_get_console_rsrc(), it does not release the reference. Fixes: 893cfb99734f ("firmware: imx: scu-pd: do not power off console domain") Signed-off-by: Felix Gu Reviewed-by: Peng Fan Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

firmware: google: framebuffer: Do not mark framebuffer as busy

2026-06-01T15:38:44+00:00

commit f3850d399de3b6142b02315227ef9e772ed0c302 upstream. Remove the flag IORESOURCE_BUSY flag from coreboot's framebuffer resource. It prevents simpledrm from successfully requesting the range for its own use; resulting in errors such as [ 2.775430] simple-framebuffer simple-framebuffer.0: [drm] could not acquire memory region [mem 0x80000000-0x80407fff flags 0x80000200] As with other uses of simple-framebuffer, the simple-framebuffer device should only declare it's I/O resources, but not actively use them. Signed-off-by: Thomas Zimmermann Fixes: 851b4c14532d ("firmware: coreboot: Add coreboot framebuffer driver") Acked-by: Tzung-Bi Shih Acked-by: Julius Werner Cc: Samuel Holland Cc: Greg Kroah-Hartman Cc: Tzung-Bi Shih Cc: Brian Norris Cc: Julius Werner Cc: chrome-platform@lists.linux.dev Cc: # v4.18+ Link: https://patch.msgid.link/20260217155836.96267-3-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman

firmware: arm_scpi: Fix device_node reference leak in probe path

2026-03-25T10:03:20+00:00

[ Upstream commit 879c001afbac3df94160334fe5117c0c83b2cf48 ] A device_node reference obtained from the device tree is not released on all error paths in the arm_scpi probe path. Specifically, a node returned by of_parse_phandle() could be leaked when the probe failed after the node was acquired. The probe function returns early and the shmem reference is not released. Use __free(device_node) scope-based cleanup to automatically release the reference when the variable goes out of scope. Fixes: ed7ecb883901 ("firmware: arm_scpi: Add compatibility checks for shmem node") Signed-off-by: Felix Gu Message-Id: <20260121-arm_scpi_2-v2-1-702d7fa84acb@gmail.com> Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

x86/efi: defer freeing of boot services memory

2026-03-25T10:02:58+00:00

commit a4b0bf6a40f3c107c67a24fbc614510ef5719980 upstream. efi_free_boot_services() frees memory occupied by EFI_BOOT_SERVICES_CODE and EFI_BOOT_SERVICES_DATA using memblock_free_late(). There are two issue with that: memblock_free_late() should be used for memory allocated with memblock_alloc() while the memory reserved with memblock_reserve() should be freed with free_reserved_area(). More acutely, with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y efi_free_boot_services() is called before deferred initialization of the memory map is complete. Benjamin Herrenschmidt reports that this causes a leak of ~140MB of RAM on EC2 t3a.nano instances which only have 512MB or RAM. If the freed memory resides in the areas that memory map for them is still uninitialized, they won't be actually freed because memblock_free_late() calls memblock_free_pages() and the latter skips uninitialized pages. Using free_reserved_area() at this point is also problematic because __free_page() accesses the buddy of the freed page and that again might end up in uninitialized part of the memory map. Delaying the entire efi_free_boot_services() could be problematic because in addition to freeing boot services memory it updates efi.memmap without any synchronization and that's undesirable late in boot when there is concurrency. More robust approach is to only defer freeing of the EFI boot services memory. Split efi_free_boot_services() in two. First efi_unmap_boot_services() collects ranges that should be freed into an array then efi_free_boot_services() later frees them after deferred init is complete. Link: https://lore.kernel.org/all/ec2aaef14783869b3be6e3c253b2dcbf67dbc12a.camel@kernel.crashing.org Fixes: 916f676f8dc0 ("x86, efi: Retain boot service code until after switching to virtual mode") Cc: Signed-off-by: Mike Rapoport (Microsoft) Reviewed-by: Benjamin Herrenschmidt Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman

EFI/CPER: don't go past the ARM processor CPER record buffer

2026-03-04T12:20:14+00:00

[ Upstream commit eae21beecb95a3b69ee5c38a659f774e171d730e ] There's a logic inside GHES/CPER to detect if the section_length is too small, but it doesn't detect if it is too big. Currently, if the firmware receives an ARM processor CPER record stating that a section length is big, kernel will blindly trust section_length, producing a very long dump. For instance, a 67 bytes record with ERR_INFO_NUM set 46198 and section length set to 854918320 would dump a lot of data going a way past the firmware memory-mapped area. Fix it by adding a logic to prevent it to go past the buffer if ERR_INFO_NUM is too big, making it report instead: [Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1 [Hardware Error]: event severity: recoverable [Hardware Error]: Error 0, type: recoverable [Hardware Error]: section_type: ARM processor error [Hardware Error]: MIDR: 0xff304b2f8476870a [Hardware Error]: section length: 854918320, CPER size: 67 [Hardware Error]: section length is too big [Hardware Error]: firmware-generated error record is incorrect [Hardware Error]: ERR_INFO_NUM is 46198 Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Jonathan Cameron Acked-by: Ard Biesheuvel Reviewed-by: Hanjun Guo [ rjw: Subject and changelog tweaks ] Link: https://patch.msgid.link/41cd9f6b3ace3cdff7a5e864890849e4b1c58b63.1767871950.git.mchehab+huawei@kernel.org Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

EFI/CPER: don't dump the entire memory region

2026-03-04T12:20:14+00:00

[ Upstream commit 55cc6fe5716f678f06bcb95140882dfa684464ec ] The current logic at cper_print_fw_err() doesn't check if the error record length is big enough to handle offset. On a bad firmware, if the ofset is above the actual record, length -= offset will underflow, making it dump the entire memory. The end result can be: - the logic taking a lot of time dumping large regions of memory; - data disclosure due to the memory dumps; - an OOPS, if it tries to dump an unmapped memory region. Fix it by checking if the section length is too small before doing a hex dump. Signed-off-by: Mauro Carvalho Chehab Reviewed-by: Jonathan Cameron Acked-by: Ard Biesheuvel Reviewed-by: Hanjun Guo [ rjw: Subject tweaks ] Link: https://patch.msgid.link/1752b5ba63a3e2f148ddee813b36c996cc617e86.1767871950.git.mchehab+huawei@kernel.org Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

efi/cper: Fix cper_bits_to_str buffer handling and return value

2026-02-06T15:43:53+00:00

commit d7f1b4bdc7108be1b178e1617b5f45c8918e88d7 upstream. The return value calculation was incorrect: `return len - buf_size;` Initially `len = buf_size`, then `len` decreases with each operation. This results in a negative return value on success. Fix by returning `buf_size - len` which correctly calculates the actual number of bytes written. Fixes: a976d790f494 ("efi/cper: Add a new helper function to print bitmasks") Signed-off-by: Morduan Zang Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman