kernel/linux.git/drivers/firmware, branch v4.19.77

firmware: arm_scmi: Check if platform has released shmem before using

2019-10-05T11:09:39+00:00

[ Upstream commit 9dc34d635c67e57051853855c43249408641a5ab ] Sometimes platfom may take too long to respond to the command and OS might timeout before platform transfer the ownership of the shared memory region to the OS with the response. Since the mailbox channel associated with the channel is freed and new commands are dispatch on the same channel, OS needs to wait until it gets back the ownership. If not, either OS may end up overwriting the platform response for the last command(which is fine as OS timed out that command) or platform might overwrite the payload for the next command with the response for the old. The latter is problematic as platform may end up interpretting the response as the payload. In order to avoid such race, let's wait until the OS gets back the ownership before we prepare the shared memory with the payload for the next command. Reported-by: Jim Quinlan Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

efi: cper: print AER info of PCIe fatal error

2019-10-05T11:09:39+00:00

[ Upstream commit b194a77fcc4001dc40aecdd15d249648e8a436d1 ] AER info of PCIe fatal error is not printed in the current driver. Because APEI driver will panic directly for fatal error, and can't run to the place of printing AER info. An example log is as following: {763}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 11 {763}[Hardware Error]: event severity: fatal {763}[Hardware Error]: Error 0, type: fatal {763}[Hardware Error]: section_type: PCIe error {763}[Hardware Error]: port_type: 0, PCIe end point {763}[Hardware Error]: version: 4.0 {763}[Hardware Error]: command: 0x0000, status: 0x0010 {763}[Hardware Error]: device_id: 0000:82:00.0 {763}[Hardware Error]: slot: 0 {763}[Hardware Error]: secondary_bus: 0x00 {763}[Hardware Error]: vendor_id: 0x8086, device_id: 0x10fb {763}[Hardware Error]: class_code: 000002 Kernel panic - not syncing: Fatal hardware error! This issue was imported by the patch, '37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context")'. To fix this issue, this patch adds print of AER info in cper_print_pcie() for fatal error. Here is the example log after this patch applied: {24}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 10 {24}[Hardware Error]: event severity: fatal {24}[Hardware Error]: Error 0, type: fatal {24}[Hardware Error]: section_type: PCIe error {24}[Hardware Error]: port_type: 0, PCIe end point {24}[Hardware Error]: version: 4.0 {24}[Hardware Error]: command: 0x0546, status: 0x4010 {24}[Hardware Error]: device_id: 0000:01:00.0 {24}[Hardware Error]: slot: 0 {24}[Hardware Error]: secondary_bus: 0x00 {24}[Hardware Error]: vendor_id: 0x15b3, device_id: 0x1019 {24}[Hardware Error]: class_code: 000002 {24}[Hardware Error]: aer_uncor_status: 0x00040000, aer_uncor_mask: 0x00000000 {24}[Hardware Error]: aer_uncor_severity: 0x00062010 {24}[Hardware Error]: TLP Header: 000000c0 01010000 00000001 00000000 Kernel panic - not syncing: Fatal hardware error! Fixes: 37448adfc7ce ("aerdrv: Move cper_print_aer() call out of interrupt context") Signed-off-by: Xiaofei Tan Reviewed-by: James Morse [ardb: put parens around terms of && operator] Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin

firmware: qcom_scm: Use proper types for dma mappings

2019-10-05T11:09:34+00:00

[ Upstream commit 6e37ccf78a53296c6c7bf426065762c27829eb84 ] We need to use the proper types and convert between physical addresses and dma addresses here to avoid mismatch warnings. This is especially important on systems with a different size for dma addresses and physical addresses. Otherwise, we get the following warning: drivers/firmware/qcom_scm.c: In function "qcom_scm_assign_mem": drivers/firmware/qcom_scm.c:469:47: error: passing argument 3 of "dma_alloc_coherent" from incompatible pointer type [-Werror=incompatible-pointer-types] We also fix the size argument to dma_free_coherent() because that size doesn't need to be aligned after it's already aligned on the allocation size. In fact, dma debugging expects the same arguments to be passed to both the allocation and freeing sides of the functions so changing the size is incorrect regardless. Reported-by: Ian Jackson Cc: Ian Jackson Cc: Julien Grall Cc: Bjorn Andersson Cc: Avaneesh Kumar Dwivedi Tested-by: Bjorn Andersson Signed-off-by: Stephen Boyd Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

firmware: google: check if size is valid when decoding VPD data

2019-09-21T05:16:44+00:00

commit 4b708b7b1a2c09fbdfff6b942ebe3a160213aacd upstream. The VPD implementation from Chromium Vital Product Data project used to parse data from untrusted input without checking if the meta data is invalid or corrupted. For example, the size from decoded content may be negative value, or larger than whole input buffer. Such invalid data may cause buffer overflow. To fix that, the size parameters passed to vpd_decode functions should be changed to unsigned integer (u32) type, and the parsing of entry header should be refactored so every size field is correctly verified before starting to decode. Fixes: ad2ac9d5c5e0 ("firmware: Google VPD: import lib_vpd source files") Signed-off-by: Hung-Te Lin Cc: stable Reviewed-by: Guenter Roeck Reviewed-by: Stephen Boyd Link: https://lore.kernel.org/r/20190830022402.214442-1-hungte@chromium.org Signed-off-by: Greg Kroah-Hartman

firmware: ti_sci: Always request response from firmware

2019-09-19T07:09:39+00:00

commit 66f030eac257a572fbedab3d9646d87d647351fd upstream. TI-SCI firmware will only respond to messages when the TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do this, set this for the ones that do not. This will be enforced in future firmware that better match the TI-SCI specifications, this patch will not break users of existing firmware. Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Signed-off-by: Andrew F. Davis Acked-by: Nishanth Menon Tested-by: Alejandro Hernandez Signed-off-by: Tero Kristo Signed-off-by: Santosh Shilimkar Signed-off-by: Greg Kroah-Hartman

iscsi_ibft: make ISCSI_IBFT dependson ACPI instead of ISCSI_IBFT_FIND

2019-08-16T08:12:45+00:00

[ Upstream commit 94bccc34071094c165c79b515d21b63c78f7e968 ] iscsi_ibft can use ACPI to find the iBFT entry during bootup, currently, ISCSI_IBFT depends on ISCSI_IBFT_FIND which is a X86 legacy way to find the iBFT by searching through the low memory. This patch changes the dependency so that other arch like ARM64 can use ISCSI_IBFT as long as the arch supports ACPI. ibft_init() needs to use the global variable ibft_addr declared in iscsi_ibft_find.c. A #ifndef CONFIG_ISCSI_IBFT_FIND is needed to declare the variable if CONFIG_ISCSI_IBFT_FIND is not selected. Moving ibft_addr into the iscsi_ibft.c does not work because if ISCSI_IBFT is selected as a module, the arch/x86/kernel/setup.c won't be able to find the variable at compile time. Signed-off-by: Thomas Tai Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Sasha Levin

firmware/psci: psci_checker: Park kthreads before stopping them

2019-08-06T17:06:48+00:00

[ Upstream commit 92e074acf6f7694e96204265eb18ac113f546e80 ] Since commit 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue"), kthreads that are bound to a CPU must be parked before being stopped. At the moment the PSCI checker calls kthread_stop() directly on the suspend kthread, which triggers the following warning: [ 6.068288] WARNING: CPU: 1 PID: 1 at kernel/kthread.c:398 __kthread_bind_mask+0x20/0x78 ... [ 6.190151] Call trace: [ 6.192566] __kthread_bind_mask+0x20/0x78 [ 6.196615] kthread_unpark+0x74/0x80 [ 6.200235] kthread_stop+0x44/0x1d8 [ 6.203769] psci_checker+0x3bc/0x484 [ 6.207389] do_one_initcall+0x48/0x260 [ 6.211180] kernel_init_freeable+0x2c8/0x368 [ 6.215488] kernel_init+0x10/0x100 [ 6.218935] ret_from_fork+0x10/0x1c [ 6.222467] ---[ end trace e05e22863d043cd3 ]--- kthread_unpark() tries to bind the thread to its CPU and aborts with a WARN() if the thread wasn't in TASK_PARKED state. Park the kthreads before stopping them. Fixes: 85f1abe0019f ("kthread, sched/wait: Fix kthread_parkme() completion issue") Signed-off-by: Jean-Philippe Brucker Reviewed-by: Sudeep Holla Acked-by: Lorenzo Pieralisi Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin

efi/bgrt: Drop BGRT status field reserved bits check

2019-07-21T07:03:04+00:00

[ Upstream commit a483fcab38b43fb34a7f12ab1daadd3907f150e2 ] Starting with ACPI 6.2 bits 1 and 2 of the BGRT status field are no longer reserved. These bits are now used to indicate if the image needs to be rotated before being displayed. The first device using these bits has now shown up (the GPD MicroPC) and the reserved bits check causes us to reject the valid BGRT table on this device. Rather then changing the reserved bits check, allowing only the 2 new bits, instead just completely remove it so that we do not end up with a similar problem when more bits are added in the future. Signed-off-by: Hans de Goede Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin

pstore: Convert buf_lock to semaphore

2019-06-11T10:20:52+00:00

commit ea84b580b95521644429cc6748b6c2bf27c8b0f3 upstream. Instead of running with interrupts disabled, use a semaphore. This should make it easier for backends that may need to sleep (e.g. EFI) when performing a write: |BUG: sleeping function called from invalid context at kernel/sched/completion.c:99 |in_atomic(): 1, irqs_disabled(): 1, pid: 2236, name: sig-xstate-bum |Preemption disabled at: |[] pstore_dump+0x72/0x330 |CPU: 26 PID: 2236 Comm: sig-xstate-bum Tainted: G D 4.20.0-rc3 #45 |Call Trace: | dump_stack+0x4f/0x6a | ___might_sleep.cold.91+0xd3/0xe4 | __might_sleep+0x50/0x90 | wait_for_completion+0x32/0x130 | virt_efi_query_variable_info+0x14e/0x160 | efi_query_variable_store+0x51/0x1a0 | efivar_entry_set_safe+0xa3/0x1b0 | efi_pstore_write+0x109/0x140 | pstore_dump+0x11c/0x330 | kmsg_dump+0xa4/0xd0 | oops_exit+0x22/0x30 ... Reported-by: Sebastian Andrzej Siewior Fixes: 21b3ddd39fee ("efi: Don't use spinlocks for efi vars") Signed-off-by: Kees Cook Signed-off-by: Greg Kroah-Hartman

efi: Fix debugobjects warning on 'efi_rts_work'

2019-05-08T05:21:44+00:00

[ Upstream commit ef1491e791308317bb9851a0ad380c4a68b58d54 ] The following commit: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") converted 'efi_rts_work' from an auto variable to a global variable. However, when submitting the work, INIT_WORK_ONSTACK() was still used, causing the following complaint from debugobjects: ODEBUG: object 00000000ed27b500 is NOT on stack 00000000c7d38760, but annotated. Change the macro to just INIT_WORK() to eliminate the warning. Signed-off-by: Waiman Long Signed-off-by: Ard Biesheuvel Acked-by: Sai Praneeth Prakhya Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Fixes: 9dbbedaa6171 ("efi: Make efi_rts_work accessible to efi page fault handler") Link: http://lkml.kernel.org/r/20181114175544.12860-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin