kernel/linux.git/drivers/firmware/tegra, branch linux-4.20.y

firmware: tegra: bpmp: Implement suspend/resume support

2018-10-10T14:47:22+00:00

When returning from a system sleep state, the BPMP driver needs to reinitialize the IVC channels used to communicate with the BPMP to restore proper functionality. Signed-off-by: Thierry Reding

firmware: tegra: adjust tested variable

2018-03-08T13:43:13+00:00

Check the variable that was most recently initialized. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression x, y, f, g, e, m; statement S1,S2,S3,S4; @@ x = f(...); if (\(<+...x...+>\&e\)) S1 else S2 ( x = g(...); | m = g(...,&x,...); | y = g(...); *if (e) S3 else S4 ) // Signed-off-by: Julia Lawall Reviewed-by: Mikko Perttunen Signed-off-by: Thierry Reding

firmware: tegra: Simplify channel management

2018-03-08T13:20:58+00:00

The Tegra194 BPMP only implements 5 channels (4 to BPMP, 1 to CCPLEX), and they are not placed contiguously in memory. The current channel management in the BPMP driver does not support this. Simplify and refactor the channel management such that only one atomic transmit channel and one receive channel are supported, and channels are not required to be placed contiguously in memory. The same configuration also works on T186 so we end up with less code. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-11-17T00:05:01+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..

locking/atomics, firmware/ivc: Convert ACCESS_ONCE() to READ_ONCE()/WRITE_ONCE()

2017-10-25T09:00:57+00:00

workqueue: kill off ACCESS_ONCE() For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't currently harmful. However, for some features it is necessary to instrument reads and writes separately, which is not possible with ACCESS_ONCE(). This distinction is critical to correct operation. It's possible to transform the bulk of kernel code using the Coccinelle script below. However, this doesn't handle comments, leaving references to ACCESS_ONCE() instances which have been removed. As a preparatory step, this patch converts the Tegra IVC code and comments to use {READ,WRITE}_ONCE() consistently. ---- virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland Signed-off-by: Paul E. McKenney Cc: Jonathan Hunter Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thierry Reding Cc: Thomas Gleixner Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-3-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar

firmware: tegra: Add BPMP debugfs support

2017-10-19T14:27:56+00:00

Tegra power management firmware running on the co-processor (BPMP) implements a simple pseudo file system akin to debugfs. The file system can be used for debugging purposes to examine and change the status of selected resources controlled by the firmware (such as clocks, resets, voltages, powergates, ...). Add support to "mirror" the firmware's file system to debugfs. At boot, query firmware for a list of all possible files and create corresponding debugfs entries. Read/write of individual files is implemented by sending a Message ReQuest (MRQ) that passes the full file path name and data to firmware via DRAM. Signed-off-by: Timo Alho Reviewed-by: Jon Hunter Signed-off-by: Thierry Reding

firmware: tegra: Expose tegra_bpmp_mrq_return()

2017-10-19T14:27:55+00:00

Expose and export the tegra_bpmp_mrq_return() function for use by drivers outside the core BPMP driver. This function is used to reply to messages originating from the BPMP, which is required in the thermal driver. Signed-off-by: Mikko Perttunen Signed-off-by: Thierry Reding

firmware: tegra: Propagate error code to caller

2017-10-17T10:22:00+00:00

Response messages from Tegra BPMP firmware contain an error return code as the first word of payload. The error code is used to indicate incorrectly formatted request message or use of non-existing resource (clk, reset, powergate) identifier. Current implementation of tegra_bpmp_transfer() ignores this code and does not pass it to caller. Fix this by adding an extra struct member to tegra_bpmp_message and populate that with return code. Signed-off-by: Timo Alho Acked-by: Jon Hunter Signed-off-by: Thierry Reding

firmware: tegra: set drvdata earlier

2017-08-17T11:08:08+00:00

Subdevices of bpmp, such as bpmp-i2c, require the bpmp device's drvdata to be set during their probe. Currently this is not always the case. Fix this by calling platform_set_drvdata() earlier during bpmp's probe. Signed-off-by: Timo Alho Signed-off-by: Thierry Reding

Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping

2017-07-07T02:20:54+00:00

Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ...