kernel/linux.git/drivers/firmware/imx, branch v6.12.80

firmware: imx: scu-irq: Set mu_resource_id before get handle

2026-01-23T10:18:35+00:00

commit ff3f9913bc0749364fbfd86ea62ba2d31c6136c8 upstream. mu_resource_id is referenced in imx_scu_irq_get_status() and imx_scu_irq_group_enable() which could be used by other modules, so need to set correct value before using imx_sc_irq_ipc_handle in SCU API call. Reviewed-by: Frank Li Signed-off-by: Peng Fan Signed-off-by: Shawn Guo Fixes: 81fb53feb66a ("firmware: imx: scu-irq: Init workqueue before request mbox channel") Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

firmware: imx: scu-irq: Init workqueue before request mbox channel

2026-01-08T09:14:09+00:00

[ Upstream commit 81fb53feb66a3aefbf6fcab73bb8d06f5b0c54ad ] With mailbox channel requested, there is possibility that interrupts may come in, so need to make sure the workqueue is initialized before the queue is scheduled by mailbox rx callback. Reviewed-by: Frank Li Signed-off-by: Peng Fan Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

firmware: imx: scu-irq: fix OF node leak in

2025-12-18T12:54:48+00:00

[ Upstream commit ee67247843a2b62d1473cfa4df300e69b5190ccf ] imx_scu_enable_general_irq_channel() calls of_parse_phandle_with_args(), but does not release the OF node reference. Add a of_node_put() call to release the reference. Fixes: 851826c7566e ("firmware: imx: enable imx scu general irq function") Reviewed-by: Frank Li Signed-off-by: Peng Fan Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

firmware: imx-scu: fix OF node leak in .probe()

2025-03-28T21:03:24+00:00

[ Upstream commit fbf10b86f6057cf79300720da4ea4b77e6708b0d ] imx_scu_probe() calls of_parse_phandle_with_args(), but does not release the OF node reference obtained by it. Add a of_node_put() call after done with the node. Fixes: f25a066d1a07 ("firmware: imx-scu: Support one TX and one RX") Signed-off-by: Joe Hattori Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC

2025-02-27T12:30:20+00:00

[ Upstream commit be6686b823b30a69b1f71bde228ce042c78a1941 ] The i.MX System Controller Management Interface firmware is only present on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without Freescale i.MX platform support. Fixes: 514b2262ade48a05 ("firmware: arm_scmi: Fix i.MX build dependency") Signed-off-by: Geert Uytterhoeven Reviewed-by: Fabio Estevam Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

firmware: arm_scmi: Fix i.MX build dependency

2024-12-27T13:01:57+00:00

[ Upstream commit 514b2262ade48a0503ac6aa03c3bfb8c5be69b21 ] The newly added SCMI vendor driver references functions in the protocol driver but needs a Kconfig dependency to ensure it can link, essentially the Kconfig dependency needs to be reversed to match the link time dependency: | arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_write': | fsl_mqs.c:(.text+0x1aa): undefined reference to `scmi_imx_misc_ctrl_set' | arm-linux-gnueabi-ld: sound/soc/fsl/fsl_mqs.o: in function `fsl_mqs_sm_read': | fsl_mqs.c:(.text+0x1ee): undefined reference to `scmi_imx_misc_ctrl_get' This however only works after changing the dependency in the SND_SOC_FSL_MQS driver as well, which uses 'select IMX_SCMI_MISC_DRV' to turn on a driver it depends on. This is generally a bad idea, so the best solution is to change that into a dependency. To allow the ASoC driver to keep building with the SCMI support, this needs to be an optional dependency that enforces the link-time dependency if IMX_SCMI_MISC_DRV is a loadable module but not depend on it if that is disabled. Fixes: 61c9f03e22fc ("firmware: arm_scmi: Add initial support for i.MX MISC protocol") Fixes: 101c9023594a ("ASoC: fsl_mqs: Support accessing registers by scmi interface") Signed-off-by: Arnd Bergmann Acked-by: Mark Brown Acked-by: Shengjiu Wang Message-Id: <20241115230555.2435004-1-arnd@kernel.org> Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: imx: Add i.MX95 MISC driver

2024-08-28T20:54:21+00:00

The i.MX95 System manager exports SCMI MISC protocol for linux to do various settings, such as set board gpio expander as wakeup source. The driver is to add the support. Reviewed-by: Cristian Marussi Signed-off-by: Peng Fan Message-Id: <20240823-imx95-bbm-misc-v2-v8-5-e600ed9e9271@nxp.com> Signed-off-by: Sudeep Holla

firmware: imx-dsp: Convert to platform remove callback returning void

2024-01-04T16:01:14+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/f4cc1ffe30b837d5eab96f2924f51999dfa9f671.1703693980.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

2023-11-01T23:09:46+00:00

Pull pmdomain updates from Ulf Hansson: - Move Kconfig files into the pmdomain subsystem - Drop use of genpd's redundant ->opp_to_performance_state() callback - amlogic: - Add support for the T7 power-domains controller - Fix mask for the second NNA mem power-domain - bcm: Fixup ASB register read and comparison for bcm2835-power - imx: Fix device link problem for consumers of the pgc power-domain - mediatek: Add support for the MT8365 power domains - qcom: - Add support for the rpmhpds for SC8380XP power-domains - Add support for the rpmhpds for SM8650 power-domains - Add support for the rpmhpd clocks for SM7150 - Add support for the rpmpds for MSM8917 (families) power-domains - starfive: Add support for the JH7110 AON PMU * tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits) pmdomain: amlogic: Fix mask for the second NNA mem PD domain pmdomain: qcom: rpmhpd: Add SC8380XP power domains pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains dt-bindings: power: rpmpd: Add SC8380XP support dt-bindings: power: qcom,rpmhpd: Add GMXC PD index dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains pmdomain: imx: Make imx pgc power domain also set the fwnode pmdomain: qcom: rpmpd: Add QM215 power domains pmdomain: qcom: rpmpd: Add MSM8917 power domains dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215 pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback pmdomain: Use device_get_match_data() pmdomain: ti: add missing of_node_put pmdomain: mediatek: Add support for MT8365 pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap pmdomain: mediatek: Add support for WAY_EN operations pmdomain: mediatek: Unify configuration for infracfg and smi ...

firmware/imx-dsp: Fix use_after_free in imx_dsp_setup_channels()

2023-10-10T02:30:29+00:00

dsp_chan->name and chan_name points to same block of memory, because dev_err still needs to be used it,so we need free it's memory after use to avoid use_after_free. Fixes: e527adfb9b7d ("firmware: imx-dsp: Fix an error handling path in imx_dsp_setup_channels()") Signed-off-by: Hao Ge Reviewed-by: Daniel Baluta Signed-off-by: Shawn Guo