kernel/linux.git/drivers/firmware/arm_scmi, branch v7.1

Merge tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2026-04-17T03:34:34+00:00

Pull SoC driver updates from Arnd Bergmann: "The driver updates again are all over the place with many minor fixes going into platform specific code. The most notable changes are: - Support for Microchip pic64gx system controllers - Work on cleaning up devicetree bindings for SoC drivers, and converting them into the new format - Lots of smaller changes for Qualcomm SoC drivers, including support for a number of newly supported chips - reset controller API cleanups and a new driver for Cix Sky1 - Reworks of the Tegra PMC and CBB drivers, along with a change to how individual Tegra SoCs get selected in Kconfig and BPMP firmware driver updates including a refresh of the ABI header to match the version used by firmware - STM32 updates to the firewall bus driver and support for the debug bus through OP-TEE - SCMI firmware driver improvements for reliability, in particular for dealing with broken firmware interrupts - Memory driver updates for Tegra, and a patch to remove the unused Baikal T1 driver" * tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits) firmware: arm_ffa: Use the correct buffer size during RXTX_MAP firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X clk: spear: fix resource leak in clk_register_vco_pll() reset: rzv2h-usb2phy: Add support for VBUS mux controller registration reset: rzv2h-usb2phy: Convert to regmap API dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property soc: microchip: add mpfs gpio interrupt mux driver dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux gpio: mpfs: Add interrupt support soc: qcom: ubwc: add helpers to get programmable values soc: qcom: ubwc: add helper to get min_acc length firmware: qcom: scm: Register gunyah watchdog device soc: qcom: socinfo: Add SoC ID for SA8650P dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P firmware: qcom: scm: Allow QSEECOM on Mahua CRD soc: qcom: wcnss: simplify allocation of req soc: qcom: pd-mapper: Add support for Eliza soc: qcom: aoss: compare against normalized cooling state soc: qcom: llcc: fix v1 SB syndrome register offset ...

Merge tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2026-04-14T03:10:58+00:00

Pull gpio updates from Bartosz Golaszewski: "For this merge window we have two new drivers: support for GPIO-signalled ACPI events on Intel platforms and a generic GPIO-over-pinctrl driver using the ARM SCMI protocol for controlling pins. Several things have been reworked in GPIO core: we unduplicated GPIO hog handling, reduced the number of SRCU locks and dereferences, improved support for software-node-based lookup and removed more legacy code after converting remaining users to modern alternatives. There's also a number of driver reworks and refactoring, documentation updates, some bug-fixes and new tests. GPIO core: - defer probe on software node lookups when the remote software node exists but has not been registered as a firmware node yet - unify GPIO hog handling by moving code duplicated in OF and ACPI modules into GPIO core and allow setting up hogs with software nodes - allow matching GPIO controllers by secondary firmware node if matching by primary does not succeed - demote deferral warnings to debug level as they are quite normal when using software nodes which don't support fw_devlink yet - disable the legacy GPIO character device uAPI v1 supprt in Kconfig by default - rework several core functions in preparation for the upcoming Revocable helper library for protecting resources against sudden removal, this reduces the number of SRCU dereferences in GPIO core - simplify file descriptor logic in GPIO character device code by using FD_PREPARE() - introduce a header defining symbols used by both GPIO consumers and providers to avoid having to include provider-specific headers from drivers which only consume GPIOs - replace snprintf() with strscpy() where formatting is not required New drivers: - add the gpio-by-pinctrl generic driver using the ARM SCMI protocol to control GPIOs (along with SCMI changes pulled from the pinctrl tree) - add a driver providing support for handling of platform events via GPIO-signalled ACPI events (used on Intel Nova Lake and later platforms) Driver changes: - extend the gpio-kempld driver with support for more recent models, interrupts and setting/getting multiple values at once - improve interrupt handling in gpio-brcmstb - add support for multi-SoC systems in gpio-tegra186 - make sure we return correct values from the .get() callbacks in several GPIO drivers by normalizing any values other than 0, 1 or negative error numbers - use flexible arrays in several drivers to reduce the number of required memory allocations - simplify synchronous waiting for virtual drivers to probe and remove the dedicated, a bit overengineered helper library dev-sync-probe - remove unneeded Kconfig dependencies on OF_GPIO in several drivers and subsystems - convert the two remaining users of of_get_named_gpio() to using GPIO descriptors and remove the (no longer used) function along with the header that declares it - add missing includes in gpio-mmio - shrink and simplify code in gpio-max732x by using guard(mutex) - remove duplicated code handling the 'ngpios' property from gpio-ts4800, it's already handled in GPIO core - use correct variable type in gpio-aspeed - add support for a new model in gpio-realtek-otto - allow to specify the active-low setting of simulated hogs over the configfs interface (in addition to existing devicetree support) in gpio-sim Bug fixes: - clear the OF_POPULATED flag on hog nodes in GPIO chip remove path on OF systems - fix resource leaks in error path in gpiochip_add_data_with_key() - drop redundant device reference in gpio-mpsse Tests: - add selftests for use-after-free cases in GPIO character device code DT bindings: - add a DT binding document for SCMI based, gpio-over-pinctrl devices - fix interrupt description in microchip,mpfs-gpio - add new compatible for gpio-realtek-otto - describe the resets of the mpfs-gpio controller - fix maintainer's email in gpio-delay bindings - remove the binding document for cavium,thunder-8890 as the corresponding device is bound over PCI and not firmware nodes Documentation: - update the recommended way of converting legacy boards to using software nodes for GPIO description - describe GPIO line value semantics - misc updates to kerneldocs Misc: - convert OMAP1 ams-delta board to using GPIO hogs described with software nodes" * tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits) gpio: swnode: defer probe on references to unregistered software nodes dt-bindings: gpio: cavium,thunder-8890: Remove DT binding Documentation: gpio: update the preferred method for using software node lookup gpio: gpio-by-pinctrl: s/used to do/is used to do/ gpio: aspeed: fix unsigned long int declaration gpio: rockchip: convert to dynamic GPIO base allocation gpio: remove dev-sync-probe gpio: virtuser: stop using dev-sync-probe gpio: aggregator: stop using dev-sync-probe gpio: sim: stop using dev-sync-probe gpio: Add Intel Nova Lake ACPI GPIO events driver gpiolib: Make deferral warnings debug messages gpiolib: fix hogs with multiple lines gpio: fix up CONFIG_OF dependencies gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver gpio: dt-bindings: Add GPIO on top of generic pin control firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE ...

firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP

2026-03-24T12:50:30+00:00

The SCMI protocol specification says that the PINCTRL_REQUEST and PINCTRL_RELEASE commands are optional. So if the SCMI server returns -EOPNOTSUPP, then treat that as success and continue. Signed-off-by: Dan Carpenter Reviewed-by: Linus Walleij Reviewed-by: Sudeep Holla Signed-off-by: Linus Walleij

firmware: arm_scmi: Support loop control in quirk code snippets

2026-03-17T07:30:22+00:00

Each SCMI firmware quirk contains a code snippet, which handles the quirk, and has full access to the surrounding context. When this context is (part of) a loop body, the code snippet may want to use loop control statements like "break" and "continue". Unfortunately the SCMI_QUIRK() macro implementation contains a dummy loop, taking precedence over any outer loops. Hence quirk code cannot use loop control statements, but has to resort to polluting the surrounding context with a label, and use goto. Fix this by replacing the "do { ... } while (0)" construct in the SCMI_QUIRK() implementation by "({ ... })". Signed-off-by: Geert Uytterhoeven Reviewed-by: Cristian Marussi Reviewed-by: Peng Fan Message-Id: <51de914cddef8fa86c2e7dd5397e5df759c45464.1773675224.git.geert+renesas@glider.be> Signed-off-by: Sudeep Holla

firmware: arm_scmi: Use round_up() for base protocol list size calculation

2026-03-08T13:12:00+00:00

Replace the open-coded size rounding logic with the kernel's round_up() helper to improve readability and align with common kernel practices. The original expression: (1 + (loop_num_ret - 1) / sizeof(u32)) * sizeof(u32) is equivalent to rounding up loop_num_ret to the nearest multiple of sizeof(u32), which is exactly what round_up() does. No functional change. Signed-off-by: Peng Fan Reviewed-by: Cristian Marussi Message-Id: <20260228-scmi-check-v1-1-4935b58bb2db@nxp.com> Signed-off-by: Sudeep Holla

firmware: arm_scmi: Spelling s/mulit/multi/, s/currenly/currently/

2026-03-08T13:00:15+00:00

Fix misspellings of "multi" and "currently". Signed-off-by: Geert Uytterhoeven Message-Id: <6735401861e0c2f3e5e680533cd6f71c4d6fd5eb.1771581270.git.geert+renesas@glider.be> Signed-off-by: Sudeep Holla

firmware: arm_scmi: Implement arm,no-completion-irq property

2026-03-08T12:59:33+00:00

Implement new property arm,no-completion-irq, which sets all SCMI operation into poll mode. This is meant to work around uncooperative SCP implementations, which do not generate completion interrupts. This applies to mbox/shmem based implementations. With this property set, such implementations which do not generate interrupts can be interacted with, until they are fixed to generate interrupts properly. Signed-off-by: Marek Vasut Reviewed-by: Cristian Marussi Message-Id: <20260117010241.186685-2-marek.vasut+renesas@mailbox.org> Signed-off-by: Sudeep Holla

firmware: arm_scmi: Fix NULL dereference on notify error path

2026-03-07T19:49:52+00:00

Since commit b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier registration for unsupported events") the call chains leading to the helper __scmi_event_handler_get_ops expect an ERR_PTR to be returned on failure to get an handler for the requested event key, while the current helper can still return a NULL when no handler could be found or created. Fix by forcing an ERR_PTR return value when the handler reference is NULL. Fixes: b5daf93b809d1 ("firmware: arm_scmi: Avoid notifier registration for unsupported events") Signed-off-by: Cristian Marussi Reviewed-by: Dan Carpenter Message-Id: <20260305131011.541444-1-cristian.marussi@arm.com> Signed-off-by: Sudeep Holla

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook