kernel/linux.git/drivers/firmware/arm_ffa, branch v5.15.208

firmware: arm_ffa: Set dma_mask for ffa devices

2025-06-04T12:37:59+00:00

[ Upstream commit cc0aac7ca17e0ea3ca84b552fc79f3e86fd07f53 ] Set dma_mask for FFA devices, otherwise DMA allocation using the device pointer lead to following warning: WARNING: CPU: 1 PID: 1 at kernel/dma/mapping.c:597 dma_alloc_attrs+0xe0/0x124 Signed-off-by: Viresh Kumar Message-Id: Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_ffa: Assign the missing IDR allocation ID to the FFA device

2023-11-20T10:08:21+00:00

[ Upstream commit 7d0bc6360f17ea323ab25939a34857123d7d87e5 ] Commit 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical partitions") added an ID to the FFA device using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. However it missed to stash the id value in ffa_dev to help freeing the ID later when the device is destroyed. Due to the missing/unassigned ID in FFA device, we get the following warning when the FF-A device is unregistered. | ida_free called for id=0 which is not allocated. | WARNING: CPU: 7 PID: 1 at lib/idr.c:525 ida_free+0x114/0x164 | CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc4 #209 | pstate: 61400009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) | pc : ida_free+0x114/0x164 | lr : ida_free+0x114/0x164 | Call trace: | ida_free+0x114/0x164 | ffa_release_device+0x24/0x3c | device_release+0x34/0x8c | kobject_put+0x94/0xf8 | put_device+0x18/0x24 | klist_devices_put+0x14/0x20 | klist_next+0xc8/0x114 | bus_for_each_dev+0xd8/0x144 | arm_ffa_bus_exit+0x30/0x54 | ffa_init+0x68/0x330 | do_one_initcall+0xdc/0x250 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x104/0x170 | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 Fix the same by actually assigning the ID in the FFA device this time for real. Fixes: 19b8766459c4 ("firmware: arm_ffa: Fix FFA device names for logical partitions") Link: https://lore.kernel.org/r/20231003085932.3553985-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_ffa: Set handle field to zero in memory descriptor

2023-06-14T09:13:08+00:00

[ Upstream commit 3aa0519a4780f1b8e11966bd879d4a2934ba455f ] As described in the commit 111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors") some fields in the memory descriptor have to be zeroed explicitly. The handle field is one of these, but it was left out from that change, fix this now. Fixes: 111a833dc5cb ("firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors") Reported-by: Imre Kis Signed-off-by: Balint Dobszay Link: https://lore.kernel.org/r/20230601140749.93812-1-balint.dobszay@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors

2023-05-30T12:55:33+00:00

commit 111a833dc5cbef3d05b2a796a7e23cb7f6ff2192 upstream. The transmit buffers allocated by the driver can be used to transmit data by any messages/commands needing the buffer. However, it is not guaranteed to have been zero-ed before every new transmission and hence it will just contain residual value from the previous transmission. There are several reserved fields in the memory descriptors that must be zero(MBZ). The receiver can reject the transmission if any such MBZ fields are non-zero. While we can set the whole page to zero, it is not optimal as most of the fields get initialised to the value required for the current transmission. So, just set the reserved/MBZ fields to zero in the memory descriptors explicitly to honour the requirement and keep the receiver happy. Fixes: cc2195fe536c ("firmware: arm_ffa: Add support for MEM_* interfaces") Reported-by: Marc Bonnici Link: https://lore.kernel.org/r/20230503131252.12585-1-sudeep.holla@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

firmware: arm_ffa: Fix FFA device names for logical partitions

2023-05-30T12:55:32+00:00

commit 19b8766459c41c6f318f8a548cc1c66dffd18363 upstream. Each physical partition can provide multiple services each with UUID. Each such service can be presented as logical partition with a unique combination of VM ID and UUID. The number of distinct UUID in a system will be less than or equal to the number of logical partitions. However, currently it fails to register more than one logical partition or service within a physical partition as the device name contains only VM ID while both VM ID and UUID are maintained in the partition information. The kernel complains with the below message: | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001' | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8 | Hardware name: FVP Base RevC (DT) | Call trace: | dump_backtrace+0xf8/0x118 | show_stack+0x18/0x24 | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | sysfs_create_dir_ns+0xe0/0x13c | kobject_add_internal+0x220/0x3d4 | kobject_add+0x94/0x100 | device_add+0x144/0x5d8 | device_register+0x20/0x30 | ffa_device_register+0x88/0xd8 | ffa_setup_partitions+0x108/0x1b8 | ffa_init+0x2ec/0x3a4 | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to | register things with the same name in the same directory. | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17 | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001 By virtue of being random enough to avoid collisions when generated in a distributed system, there is no way to compress UUID keys to the number of bits required to identify each. We can eliminate '-' in the name but it is not worth eliminating 4 bytes and add unnecessary logic for doing that. Also v1.0 doesn't provide the UUID of the partitions which makes it hard to use the same for the device name. So to keep it simple, let us alloc an ID using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. Also stash the id value in ffa_dev to help freeing the ID later when the device is destroyed. Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Reported-by: Lucian Paul-Trifu Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-3-d9108e43a176@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

firmware: arm_ffa: Check if ffa_driver remove is present before executing

2023-05-30T12:55:32+00:00

commit b71b55248a580e9c9befc4ae060539f1f8e477da upstream. Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d597e1e ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com Signed-off-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

firmware: arm_ffa: Remove incorrect assignment of driver_data

2022-06-09T08:23:09+00:00

[ Upstream commit 00512d2930b338fdd42bd90bbd1793fe212c2d31 ] The ffa core driver currently assigns its own driver information to individual ffa device driver_data which is wrong. Firstly, it leaks this core driver information to individual ffa_device and hence to ffa_driver. Secondly the ffa_device driver_data is for use by individual ffa_driver and not for this core driver managing all those devices. Link: https://lore.kernel.org/r/20220429113946.2087145-2-sudeep.holla@arm.com Fixes: d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions") Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_ffa: Fix uuid parameter to ffa_partition_probe

2022-06-09T08:23:09+00:00

[ Upstream commit f3c45c045e25ed52461829d2ce07954f72b6ad15 ] While we pass uuid_null intentionally to ffa_partition_probe in ffa_setup_partitions to get the count of the partitions, it must not be uuid_null in ffa_partition_info_get which is used by the ffa_drivers to fetch the specific partition info passing the UUID of the partition. Fix ffa_partition_info_get by passing the received uuid down to ffa_partition_probe so that the correct partition information is fetched. Link: https://lore.kernel.org/r/20220429113946.2087145-1-sudeep.holla@arm.com Fixes: d0c0bce83122 ("firmware: arm_ffa: Setup in-kernel users of FFA partitions") Reported-by: Arunachalam Ganapathy Signed-off-by: Sudeep Holla Signed-off-by: Sasha Levin

firmware: arm_ffa: Fix __ffa_devices_unregister

2021-10-05T09:39:47+00:00

When arm_ffa firmware driver module is unloaded or removed we call __ffa_devices_unregister on all the devices on the ffa bus. It must unregister all the devices instead it is currently just releasing the devices without unregistering. That is pure wrong as when we try to load the module back again, it will result in the kernel crash something like below. -->8 CPU: 2 PID: 232 Comm: modprobe Not tainted 5.15.0-rc2+ #169 Hardware name: FVP Base RevC (DT) Call trace: dump_backtrace+0x0/0x1cc show_stack+0x18/0x64 dump_stack_lvl+0x64/0x7c dump_stack+0x18/0x38 sysfs_create_dir_ns+0xe4/0x140 kobject_add_internal+0x170/0x358 kobject_add+0x94/0x100 device_add+0x178/0x5f0 device_register+0x20/0x30 ffa_device_register+0x80/0xcc [ffa_module] ffa_setup_partitions+0x7c/0x108 [ffa_module] init_module+0x290/0x2dc [ffa_module] do_one_initcall+0xbc/0x230 do_init_module+0x58/0x304 load_module+0x15e0/0x1f68 __arm64_sys_finit_module+0xb8/0xf4 invoke_syscall+0x44/0x140 el0_svc_common+0xb4/0xf0 do_el0_svc+0x24/0x80 el0_svc+0x20/0x50 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1a0/0x1a4 kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to register things with the same name in the same directory. ---- Fix the issue by calling device_unregister in __ffa_devices_unregister which will also take care of calling device_release(which is mapped to ffa_release_device) Link: https://lore.kernel.org/r/20210924092859.3057562-2-sudeep.holla@arm.com Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla

firmware: arm_ffa: Add missing remove callback to ffa_bus_type

2021-10-05T09:39:46+00:00

Currently the arm_ffa firmware driver can be built as module and hence all the users of FFA driver. If any driver on the ffa bus is removed or unregistered, the remove callback on all the device bound to the driver being removed should be callback. For that to happen, we must register a remove callback on the ffa_bus which is currently missing. This results in the probe getting called again without the previous remove callback on a device which may result in kernel crash. Fix the issue by registering the remove callback on the FFA bus. Link: https://lore.kernel.org/r/20210924092859.3057562-1-sudeep.holla@arm.com Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Reported-by: Jens Wiklander Tested-by: Jens Wiklander Signed-off-by: Sudeep Holla