Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=v6.6.131 2022-06-03T20:39:30+00:00 2022-06-03T20:39:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2022-06-03T20:39:30+00:00 urn:sha1:93ce7948e38ffe6f9b4fd403c94c098bd892a5ff Pull more EFI updates from Ard Biesheuvel: "Follow-up tweaks for EFI changes - they mostly address issues introduced this merge window, except for Heinrich's patch: - fix new DXE service invocations for mixed mode - use correct Kconfig symbol when setting PE header flag - clean up the drivers/firmware/efi Kconfig dependencies so that features that depend on CONFIG_EFI are hidden from the UI when the symbol is not enabled. Also included is a RISC-V bugfix from Heinrich to avoid read-write mappings of read-only firmware regions in the EFI page tables" * tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: clean up Kconfig dependencies on CONFIG_EFI efi/x86: libstub: Make DXE calls mixed mode safe efi: x86: Fix config name for setting the NX-compatibility flag in the PE header riscv: read-only pages should not be writable 2022-06-01T12:08:13+00:00 Ard Biesheuvel ardb@kernel.org 2022-05-28T09:49:54+00:00 urn:sha1:75ed63d919400b803691a0c757ee23c6f767a625 Geert reports that the new option CONFIG_EFI_DISABLE_RUNTIME is user visible even when EFI support is disabled, which is unnecessary and clutters the Kconfig interface. So let's move this option into the existing Kconfig submenu that already depends on CONFIG_EFI, and while at it, give some other options the same treatment. Also clean up a small wart where the efi/ subdirectory is listed twice. Let's just list it unconditionally so that both EFI and UEFI_CPER based pieces will be built independently (the latter only depends on the former on !X86) Signed-off-by: Ard Biesheuvel <ardb@kernel.org> 2022-05-16T11:58:11+00:00 TingHan Shen tinghan.shen@mediatek.com 2022-05-12T08:22:13+00:00 urn:sha1:9db69df4bdd37eb1f65b6931ee067fb15b9a4d5c Some of mediatek processors contain the Tensilica HiFix DSP for audio processing. The communication between Host CPU and DSP firmware is taking place using a shared memory area for message passing. ADSP IPC protocol offers (send/recv) interfaces using mediatek-mailbox APIs. We use two mbox channels to implement a request-reply protocol. Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Signed-off-by: TingHan Shen <tinghan.shen@mediatek.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Tzung-Bi Shih <tzungbi@google.com> Reviewed-by: YC Hung <yc.hung@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220512082215.3018-2-tinghan.shen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> 2021-09-27T12:00:42+00:00 Simon Trimmer simont@opensource.cirrus.com 2021-09-13T16:00:57+00:00 urn:sha1:f6bc909e7673c30abcbdb329e7d0aa2e83c103d7 wm_adsp originally provided firmware loading on some audio DSP and was implemented as an ASoC codec driver. However, the firmware loading now covers a wider range of DSP cores and peripherals containing them, beyond just audio. So it needs to be available to non-audio drivers. All the core firmware loading support has been moved into a new driver cs_dsp, leaving only the ASoC-specific parts in wm_adsp. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210913160057.103842-17-simont@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> 2021-09-01T22:25:28+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-09-01T22:25:28+00:00 urn:sha1:866147b8fa59530812fc769027a94468d89401e7 Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ... 2021-07-23T01:32:43+00:00 Dave Airlie airlied@redhat.com 2021-07-23T01:31:50+00:00 urn:sha1:8da49a33dda7294c1af508f8aa81cd638d0afd62 drm-misc-next for v5.15-rc1: UAPI Changes: - Remove sysfs stats for dma-buf attachments, as it causes a performance regression. Previous merge is not in a rc kernel yet, so no userspace regression possible. Cross-subsystem Changes: - Sanitize user input in kyro's viewport ioctl. - Use refcount_t in fb_info->count - Assorted fixes to dma-buf. - Extend x86 efifb handling to all archs. - Fix neofb divide by 0. - Document corpro,gm7123 bridge dt bindings. Core Changes: - Slightly rework drm master handling. - Cleanup vgaarb handling. - Assorted fixes. Driver Changes: - Add support for ws2401 panel. - Assorted fixes to stm, ast, bochs. - Demidlayer ingenic irq. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com 2021-07-21T10:04:56+00:00 Javier Martinez Canillas javierm@redhat.com 2021-06-25T13:13:59+00:00 urn:sha1:8633ef82f101c040427b57d4df7b706261420b94 The register_gop_device() function registers an "efi-framebuffer" platform device to match against the efifb driver, to have an early framebuffer for EFI platforms. But there is already support to do exactly the same by the Generic System Framebuffers (sysfb) driver. This used to be only for X86 but it has been moved to drivers/firmware and could be reused by other architectures. Also, besides supporting registering an "efi-framebuffer", this driver can register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers on non-X86 EFI platforms. For example, on aarch64 these drivers can only be used with DT and doesn't have code to register a "simple-frambuffer" platform device when booting with EFI. For these reasons, let's remove the register_gop_device() duplicated code and instead move the platform specific logic that's there to sysfb driver. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com 2021-07-21T10:04:56+00:00 Javier Martinez Canillas javierm@redhat.com 2021-06-25T13:09:46+00:00 urn:sha1:d391c58271072d0b0fad93c82018d495b2633448 The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625130947.1803678-2-javierm@redhat.com 2021-07-19T20:20:55+00:00 John Stultz john.stultz@linaro.org 2021-07-07T04:53:20+00:00 urn:sha1:b42000e4b8741bf6591fcbbbefff6aa745f8eb29 Allow the qcom_scm driver to be loadable as a permenent module. This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit to ensure that drivers that call into the qcom_scm driver are also built as modules. While not ideal in some cases its the only safe way I can find to avoid build errors without having those drivers select QCOM_SCM and have to force it on (as QCOM_SCM=n can be valid for those drivers). Reviving this now that Saravana's fw_devlink defaults to on, which should avoid loading troubles seen before. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Link: https://lore.kernel.org/r/20210707045320.529186-1-john.stultz@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> 2021-05-26T21:36:46+00:00 Sudeep Holla sudeep.holla@arm.com 2021-05-21T15:10:29+00:00 urn:sha1:e781858488b918e30a6ff28e9eab6058b787e3b3 The Arm FF for Armv8-A specification has concept of endpoints or partitions. In the Normal world, a partition could be a VM when the Virtualization extension is enabled or the kernel itself. In order to handle multiple partitions, we can create a FFA device for each such partition on a dedicated FFA bus. Similarly, different drivers requiring FFA transport can be registered on the same bus. We can match the device and drivers using UUID. This is mostly for the in-kernel users with FFA drivers. Link: https://lore.kernel.org/r/20210521151033.181846-2-sudeep.holla@arm.com Tested-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>