kernel/linux.git/drivers/firewire, branch v6.6.132

firewire: nosy: Fix dma_free_coherent() size

2026-01-11T14:22:07+00:00

[ Upstream commit c48c0fd0e19684b6ecdb4108a429e3a4e73f5e21 ] It looks like the buffer allocated and mapped in add_card() is done with size RCV_BUFFER_SIZE which is 16 KB and 4KB. Fixes: 286468210d83 ("firewire: new driver: nosy - IEEE 1394 traffic sniffer") Co-developed-by: Thomas Fourier Signed-off-by: Thomas Fourier Co-developed-by: Christophe JAILLET Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/20251216165420.38355-2-fourier.thomas@gmail.com Signed-off-by: Takashi Sakamoto Signed-off-by: Sasha Levin

firewire: core: fix overlooked update of subsystem ABI version

2025-10-02T11:42:47+00:00

[ Upstream commit 853a57ba263adfecf4430b936d6862bc475b4bb5 ] In kernel v6.5, several functions were added to the cdev layer. This required updating the default version of subsystem ABI up to 6, but this requirement was overlooked. This commit updates the version accordingly. Fixes: 6add87e9764d ("firewire: cdev: add new version of ABI to notify time stamp at request/response subaction of transaction#") Link: https://lore.kernel.org/r/20250920025148.163402-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto Signed-off-by: Sasha Levin

firewire: core: correct range of block for case of switch statement

2024-10-04T14:29:28+00:00

[ Upstream commit ebb9d3ca8f7efc1b6a2f1750d1058eda444883d0 ] A commit d8527cab6c31 ("firewire: cdev: implement new event to notify response subaction with time stamp") adds an additional case, FW_CDEV_EVENT_RESPONSE2, into switch statement in complete_transaction(). However, the range of block is beyond to the case label and reaches neibour default label. This commit corrects the range of block. Fortunately, it has few impacts in practice since the local variable in the scope under the label is not used in codes under default label. Fixes: d8527cab6c31 ("firewire: cdev: implement new event to notify response subaction with time stamp") Link: https://lore.kernel.org/r/20240810070403.36801-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto Signed-off-by: Sasha Levin

firewire: ohci: fulfill timestamp for some local asynchronous transaction

2024-05-17T10:02:30+00:00

commit 09773bf55aeabe3fd61745d900798dc1272c778a upstream. 1394 OHCI driver generates packet data for the response subaction to the request subaction to some local registers. In the case, the driver should assign timestamp to them by itself. This commit fulfills the timestamp for the subaction. Cc: stable@vger.kernel.org Fixes: dcadfd7f7c74 ("firewire: core: use union for callback of transaction completion") Link: https://lore.kernel.org/r/20240429084709.707473-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto Signed-off-by: Greg Kroah-Hartman

firewire: nosy: ensure user_length is taken into account when fetching packet contents

2024-05-17T10:02:27+00:00

commit 38762a0763c10c24a4915feee722d7aa6e73eb98 upstream. Ensure that packet_buffer_get respects the user_length provided. If the length of the head packet exceeds the user_length, packet_buffer_get will now return 0 to signify to the user that no data were read and a larger buffer size is required. Helps prevent user space overflows. Signed-off-by: Thanassis Avgerinos Signed-off-by: Takashi Sakamoto Signed-off-by: Greg Kroah-Hartman

firewire: ohci: mask bus reset interrupts between ISR and bottom half

2024-05-17T10:02:13+00:00

[ Upstream commit 752e3c53de0fa3b7d817a83050b6699b8e9c6ec9 ] In the FireWire OHCI interrupt handler, if a bus reset interrupt has occurred, mask bus reset interrupts until bus_reset_work has serviced and cleared the interrupt. Normally, we always leave bus reset interrupts masked. We infer the bus reset from the self-ID interrupt that happens shortly thereafter. A scenario where we unmask bus reset interrupts was introduced in 2008 in a007bb857e0b26f5d8b73c2ff90782d9c0972620: If OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we will unmask bus reset interrupts so we can log them. irq_handler logs the bus reset interrupt. However, we can't clear the bus reset event flag in irq_handler, because we won't service the event until later. irq_handler exits with the event flag still set. If the corresponding interrupt is still unmasked, the first bus reset will usually freeze the system due to irq_handler being called again each time it exits. This freeze can be reproduced by loading firewire_ohci with "modprobe firewire_ohci debug=-1" (to enable all debugging output). Apparently there are also some cases where bus_reset_work will get called soon enough to clear the event, and operation will continue normally. This freeze was first reported a few months after a007bb85 was committed, but until now it was never fixed. The debug level could safely be set to -1 through sysfs after the module was loaded, but this would be ineffectual in logging bus reset interrupts since they were only unmasked during initialization. irq_handler will now leave the event flag set but mask bus reset interrupts, so irq_handler won't be called again and there will be no freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will unmask the interrupt after servicing the event, so future interrupts will be caught as desired. As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be enabled through sysfs in addition to during initial module loading. However, when enabled through sysfs, logging of bus reset interrupts will be effective only starting with the second bus reset, after bus_reset_work has executed. Signed-off-by: Adam Goldman Signed-off-by: Takashi Sakamoto Signed-off-by: Sasha Levin

firewire: ohci: prevent leak of left-over IRQ on unbind

2024-04-03T13:28:41+00:00

commit 575801663c7dc38f826212b39e3b91a4a8661c33 upstream. Commit 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ") also removed the call to free_irq() in pci_remove(), leading to a leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove() when unbinding the driver from the device remove_proc_entry: removing non-empty directory 'irq/136', leaking at least 'firewire_ohci' Call Trace: ? remove_proc_entry+0x19c/0x1c0 ? __warn+0x81/0x130 ? remove_proc_entry+0x19c/0x1c0 ? report_bug+0x171/0x1a0 ? console_unlock+0x78/0x120 ? handle_bug+0x3c/0x80 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? remove_proc_entry+0x19c/0x1c0 unregister_irq_proc+0xf4/0x120 free_desc+0x3d/0xe0 ? kfree+0x29f/0x2f0 irq_free_descs+0x47/0x70 msi_domain_free_locked.part.0+0x19d/0x1d0 msi_domain_free_irqs_all_locked+0x81/0xc0 pci_free_msi_irqs+0x12/0x40 pci_disable_msi+0x4c/0x60 pci_remove+0x9d/0xc0 [firewire_ohci 01b483699bebf9cb07a3d69df0aa2bee71db1b26] pci_device_remove+0x37/0xa0 device_release_driver_internal+0x19f/0x200 unbind_store+0xa1/0xb0 remove irq with devm_free_irq() before pci_disable_msi() also remove it in fail_msi: of pci_probe() as this would lead to an identical leak Cc: stable@vger.kernel.org Fixes: 5a95f1ded28691e6 ("firewire: ohci: use devres for requested IRQ") Signed-off-by: Edmund Raile Link: https://lore.kernel.org/r/20240229144723.13047-2-edmund.raile@proton.me Signed-off-by: Takashi Sakamoto Signed-off-by: Greg Kroah-Hartman

firewire: core: use long bus reset on gap count error

2024-03-26T22:19:14+00:00

[ Upstream commit d0b06dc48fb15902d7da09c5c0861e7f042a9381 ] When resetting the bus after a gap count error, use a long rather than short bus reset. IEEE 1394-1995 uses only long bus resets. IEEE 1394a adds the option of short bus resets. When video or audio transmission is in progress and a device is hot-plugged elsewhere on the bus, the resulting bus reset can cause video frame drops or audio dropouts. Short bus resets reduce or eliminate this problem. Accordingly, short bus resets are almost always preferred. However, on a mixed 1394/1394a bus, a short bus reset can trigger an immediate additional bus reset. This double bus reset can be interpreted differently by different nodes on the bus, resulting in an inconsistent gap count after the bus reset. An inconsistent gap count will cause another bus reset, leading to a neverending bus reset loop. This only happens for some bus topologies, not for all mixed 1394/1394a buses. By instead sending a long bus reset after a gap count inconsistency, we avoid the doubled bus reset, restoring the bus to normal operation. Signed-off-by: Adam Goldman Link: https://sourceforge.net/p/linux1394/mailman/message/58741624/ Signed-off-by: Takashi Sakamoto Signed-off-by: Sasha Levin

firewire: core: send bus reset promptly on gap count error

2024-03-01T12:34:56+00:00

[ Upstream commit 7ed4380009e96d9e9c605e12822e987b35b05648 ] If we are bus manager and the bus has inconsistent gap counts, send a bus reset immediately instead of trying to read the root node's config ROM first. Otherwise, we could spend a lot of time trying to read the config ROM but never succeeding. This eliminates a 50+ second delay before the FireWire bus is usable after a newly connected device is powered on in certain circumstances. The delay occurs if a gap count inconsistency occurs, we are not the root node, and we become bus manager. One scenario that causes this is with a TI XIO2213B OHCI, the first time a Sony DSR-25 is powered on after being connected to the FireWire cable. In this configuration, the Linux box will not receive the initial PHY configuration packet sent by the DSR-25 as IRM, resulting in the DSR-25 having a gap count of 44 while the Linux box has a gap count of 63. FireWire devices have a gap count parameter, which is set to 63 on power-up and can be changed with a PHY configuration packet. This determines the duration of the subaction and arbitration gaps. For reliable communication, all nodes on a FireWire bus must have the same gap count. A node may have zero or more of the following roles: root node, bus manager (BM), isochronous resource manager (IRM), and cycle master. Unless a root node was forced with a PHY configuration packet, any node might become root node after a bus reset. Only the root node can become cycle master. If the root node is not cycle master capable, the BM or IRM should force a change of root node. After a bus reset, each node sends a self-ID packet, which contains its current gap count. A single bus reset does not change the gap count, but two bus resets in a row will set the gap count to 63. Because a consistent gap count is required for reliable communication, IEEE 1394a-2000 requires that the bus manager generate a bus reset if it detects that the gap count is inconsistent. When the gap count is inconsistent, build_tree() will notice this after the self identification process. It will set card->gap_count to the invalid value 0. If we become bus master, this will force bm_work() to send a bus reset when it performs gap count optimization. After a bus reset, there is no bus manager. We will almost always try to become bus manager. Once we become bus manager, we will first determine whether the root node is cycle master capable. Then, we will determine if the gap count should be changed. If either the root node or the gap count should be changed, we will generate a bus reset. To determine if the root node is cycle master capable, we read its configuration ROM. bm_work() will wait until we have finished trying to read the configuration ROM. However, an inconsistent gap count can make this take a long time. read_config_rom() will read the first few quadlets from the config ROM. Due to the gap count inconsistency, eventually one of the reads will time out. When read_config_rom() fails, fw_device_init() calls it again until MAX_RETRIES is reached. This takes 50+ seconds. Once we give up trying to read the configuration ROM, bm_work() will wake up, assume that the root node is not cycle master capable, and do a bus reset. Hopefully, this will resolve the gap count inconsistency. This change makes bm_work() check for an inconsistent gap count before waiting for the root node's configuration ROM. If the gap count is inconsistent, bm_work() will immediately do a bus reset. This eliminates the 50+ second delay and rapidly brings the bus to a working state. I considered that if the gap count is inconsistent, a PHY configuration packet might not be successful, so it could be desirable to skip the PHY configuration packet before the bus reset in this case. However, IEEE 1394a-2000 and IEEE 1394-2008 say that the bus manager may transmit a PHY configuration packet before a bus reset when correcting a gap count error. Since the standard endorses this, I decided it's safe to retain the PHY configuration packet transmission. Normally, after a topology change, we will reset the bus a maximum of 5 times to change the root node and perform gap count optimization. However, if there is a gap count inconsistency, we must always generate a bus reset. Otherwise the gap count inconsistency will persist and communication will be unreliable. For that reason, if there is a gap count inconstency, we generate a bus reset even if we already reached the 5 reset limit. Signed-off-by: Adam Goldman Reference: https://sourceforge.net/p/linux1394/mailman/message/58727806/ Signed-off-by: Takashi Sakamoto Signed-off-by: Sasha Levin

firewire: core: correct documentation of fw_csr_string() kernel API

2024-02-23T08:25:02+00:00

commit 5f9ab17394f831cb7986ec50900fa37507a127f1 upstream. Against its current description, the kernel API can accepts all types of directory entries. This commit corrects the documentation. Cc: stable@vger.kernel.org Fixes: 3c2c58cb33b3 ("firewire: core: fw_csr_string addendum") Link: https://lore.kernel.org/r/20240130100409.30128-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto Signed-off-by: Greg Kroah-Hartman