kernel/linux.git/drivers/firewire/core-card.c, branch v5.19

Merge branch 'for-linus' into for-next

2022-05-23T05:48:27+00:00

Merge for 5.18-rc1 Signed-off-by: Takashi Iwai

firewire: core: extend card->lock in fw_core_handle_bus_reset

2022-04-25T06:01:09+00:00

card->local_node and card->bm_retries are both always accessed under card->lock. fw_core_handle_bus_reset has a check whose condition depends on card->local_node and whose body writes to card->bm_retries. Both of these accesses are not under card->lock. Move the lock acquiring of card->lock to before this check such that these accesses do happen when card->lock is held. fw_destroy_nodes is called inside the check. Since fw_destroy_nodes already acquires card->lock inside its function body, move this out to the callsites of fw_destroy_nodes. Also add a comment to indicate which locking is necessary when calling fw_destroy_nodes. Cc: Signed-off-by: Niels Dossche Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220409041243.603210-4-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai

firewire: add kernel API to access CYCLE_TIME register

2022-04-05T16:23:04+00:00

1394 OHCI specification defined Isochronous Cycle Timer Register to get value of CYCLE_TIME register defined by IEEE 1394 for CSR architecture defined by ISO/IEC 13213. Unit driver can calculate packet time by compute with the value of CYCLE_TIME and timeStamp field in descriptor of each isochronous and asynchronous context. The resolution of CYCLE_TIME is 49.576 MHz, while the one of timeStamp is 8,000 Hz. Current implementation of Linux FireWire subsystem allows the driver to get the value of CYCLE_TIMER CSR register by transaction service. The transaction service has overhead in regard of access to MMIO register. This commit adds kernel API for unit driver to access the register directly. Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220405072221.226217-3-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai

firewire: Add dummy read_csr/write_csr functions

2022-04-05T16:23:03+00:00

(Hector Martin wrote) This fixes segfaults when a card gets yanked off of the PCIe bus while busy, e.g. with a userspace app trying to get the cycle time: [8638860.994310] Call Trace: [8638860.994313] ioctl_get_cycle_timer2+0x4f/0xd0 [firewire_core] [8638860.994323] fw_device_op_ioctl+0xae/0x150 [firewire_core] [8638860.994328] __x64_sys_ioctl+0x7d/0xb0 [8638860.994332] do_syscall_64+0x45/0x80 [8638860.994337] entry_SYSCALL_64_after_hwframe+0x44/0xae (Takashi Sakamoto wrote) As long as reading commit 20802224298c ("firewire: core: add forgotten dummy driver methods, remove unused ones"), three functions are not implemeted in dummy driver for reason; .read_csr, .write_csr, and .set_config_rom. In core of Linux FireWire subsystem, the callback of .set_config_rom is under acquisition of mutual exclusive for local list of card. The acquision is also done in process for removal of card, therefore it's safe for missing implementation of .set_config_rom. On the other hand, no lock primitive accompanies any call of .read_csr and .write_csr. For userspace client, check of node shutdown is done in the beginning of dispatch of ioctl request, while node shifts to shutdown state in workqueue context enough after card shifts to dummy driver. It's probable that these two functions are called for the dummy driver by the code of userspace client. In-kernel unit driver has similar situation. It's better to add implementation of the two functions for dummy driver. Signed-off-by: Hector Martin Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20220405072221.226217-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

2012-05-24T19:57:47+00:00

Pull IEEE 1394 (FireWire) subsystem updates from Stefan Richter: - Fix mismatch between DMA mapping direction (was wrong) and DMA synchronization direction (was correct) of isochronous reception buffers of userspace drivers if vma-mapped for R/W access. For example, libdc1394 was affected. - more consistent retry stategy in device discovery/ rediscovery, and improved failure diagnostics - various small cleanups, e.g. use SCSI layer's DMA mapping API in firewire-sbp2 * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: document the absence of alignment requirements firewire: sbp2: remove superfluous blk_queue_max_segment_size() call firewire: sbp2: use scsi_dma_(un)map firewire: sbp2: give correct DMA device to scsi framework firewire: core: fw_device_refresh(): clean up error handling firewire: core: log config rom reading errors firewire: core: log error in case of failed bus manager lock firewire: move rcode_string() to core firewire: core: improve reread_config_rom() interface firewire: core: wait for inaccessible devices after bus reset firewire: ohci: omit spinlock IRQ flags where possible firewire: ohci: correct signedness of a local variable firewire: core: fix DMA mapping direction firewire: use module_pci_driver

firewire: Move fw_card kref functions into linux/firewire.h

2012-05-09T22:25:17+00:00

When writing a firewire driver that doesn't deal with struct fw_device objects (e.g. it only publishes FireWire units and doesn't subscribe to them), you likely need to keep referenced to struct fw_card objects so that you can send messages to other nodes. This patch moves fw_card_put(), fw_card_get() and fw_card_release() into the public include/linux/firewire.h header instead of drivers/firewire/core.h, and adds EXPORT_SYMBOL_GPL(fw_card_release). The firewire-sbp-target module requires these so it can keep a reference to the fw_card object in order that it can fetch ORBs to execute and read/write related data and status information. Signed-off-by: Chris Boot Acked-by: Stefan Richter Cc: Clemens Ladisch Signed-off-by: Nicholas Bellinger

firewire: core: log error in case of failed bus manager lock

2012-04-17T20:56:53+00:00

If the lock access to the bus manager register fails, also log the actual error that caused it to fail. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: allow explicit flushing of iso packet completions

2012-03-18T21:15:39+00:00

Extend the kernel and userspace APIs to allow reporting all currently completed isochronous packets, even if the next interrupt packet has not yet been reached. This is required to determine the status of the packets at the end of a paused or stopped stream, and useful for more precise synchronization of audio streams. Signed-off-by: Clemens Ladisch Signed-off-by: Stefan Richter

firewire: core: prefix log messages with card name

2012-02-22T21:36:00+00:00

Associate all log messages from firewire-core with the respective card because some people have more than one card. E.g. firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core: created device fw0: GUID 0814438400000389, S800 firewire_core: phy config: new root=ffc1, gap_count=5 firewire_core: created device fw1: GUID 0814438400000388, S800 firewire_core: created device fw2: GUID 0001d202e06800d1, S800 turns into firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0 firewire_core 0000:04:00.0: created device fw0: GUID 0814438400000389, S800 firewire_core 0000:04:00.0: phy config: new root=ffc1, gap_count=5 firewire_core 0000:05:00.0: created device fw1: GUID 0814438400000388, S800 firewire_core 0000:04:00.0: created device fw2: GUID 0001d202e06800d1, S800 This increases the module size slightly; to keep this in check, turn the former printk wrapper macros into functions. Their implementation is largely copied from driver core's dev_printk counterparts. Signed-off-by: Stefan Richter