kernel/linux.git/drivers/extcon, branch v5.4.151

extcon: intel-mrfld: Sync hardware and software state on init

2021-07-19T06:53:16+00:00

commit ecb5bdff901139850fb3ca3ae2d0cccac045bc52 upstream. extcon driver for Basin Cove PMIC shadows the switch status used for dwc3 DRD to detect a change in the switch position. This change initializes the status at probe time. Cc: stable@vger.kernel.org Fixes: 492929c54791 ("extcon: mrfld: Introduce extcon driver for Basin Cove PMIC") Reviewed-by: Andy Shevchenko Signed-off-by: Ferry Toth Signed-off-by: Chanwoo Choi Signed-off-by: Greg Kroah-Hartman

extcon: max8997: Add missing modalias string

2021-07-14T14:53:46+00:00

[ Upstream commit dc11fc2991e9efbceef93912b83e333d2835fb19 ] The platform device driver name is "max8997-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: b76668ba8a77 ("Extcon: add MAX8997 extcon driver") Signed-off-by: Marek Szyprowski Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin

extcon: sm5502: Drop invalid register write in sm5502_reg_data

2021-07-14T14:53:46+00:00

[ Upstream commit d25b224f8e5507879b36a769a6d1324cf163466c ] When sm5502_init_dev_type() iterates over sm5502_reg_data to initialize the registers it is limited by ARRAY_SIZE(sm5502_reg_data). There is no need to add another empty element to sm5502_reg_data. Having the additional empty element in sm5502_reg_data will just result in writing 0xff to register 0x00, which does not really make sense. Fixes: 914b881f9452 ("extcon: sm5502: Add support new SM5502 extcon device driver") Signed-off-by: Stephan Gerhold Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin

extcon: extcon-max8997: Fix IRQ freeing at error path

2021-07-14T14:53:24+00:00

[ Upstream commit 610bdc04830a864115e6928fc944f1171dfff6f3 ] If reading MAX8997_MUIC_REG_STATUS1 fails at probe the driver exits without freeing the requested IRQs. Free the IRQs prior returning if reading the status fails. Fixes: 3e34c8198960 ("extcon: max8997: Avoid forcing UART path on drive probe") Signed-off-by: Matti Vaittinen Reviewed-by: Hans de Goede Acked-by: Chanwoo Choi Link: https://lore.kernel.org/r/27ee4a48ee775c3f8c9d90459c18b6f2b15edc76.1623146580.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Hans de Goede Signed-off-by: Sasha Levin

extcon: arizona: Fix various races on driver unbind

2021-05-11T12:04:09+00:00

[ Upstream commit e5b499f6fb17bc95a813e85d0796522280203806 ] We must free/disable all interrupts and cancel all pending works before doing further cleanup. Before this commit arizona_extcon_remove() was doing several register writes to shut things down before disabling the IRQs and it was cancelling only 1 of the 3 different works used. Move all the register-writes shutting things down to after the disabling of the IRQs and add the 2 missing cancel_delayed_work_sync() calls. This fixes various possible races on driver unbind. One of which would always trigger on devices using the mic-clamp feature for jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was done before disabling the IRQs, causing: 1. arizona_jackdet() to run 2. detect a jack being inserted (clamp disabled means jack inserted) 3. call arizona_start_mic() which: 3.1 Enables the MICVDD regulator 3.2 takes a pm_runtime_reference And this was all happening after the ARIZONA_MICD_ENA bit clearing, which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK update was being done after the ARIZONA_MICD_ENA bit clearing. So this means that arizona_extcon_remove() would exit with 1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced. MICVDD still being enabled caused the following oops when the regulator is released by the devm framework: [ 2850.745757] ------------[ cut here ]------------ [ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0 [ 2850.745835] Modules linked in: extcon_arizona ... ... [ 2850.746909] Call Trace: [ 2850.746932] regulator_put+0x2d/0x40 [ 2850.746946] release_nodes+0x22a/0x260 [ 2850.746984] __device_release_driver+0x190/0x240 [ 2850.747002] driver_detach+0xd4/0x120 ... [ 2850.747337] ---[ end trace f455dfd7abd9781f ]--- Note this oops is just one of various theoretically possible races caused by the wrong ordering inside arizona_extcon_remove(), this fixes the ordering fixing all possible races, including the reported oops. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Charles Keepax Tested-by: Charles Keepax Acked-by: Chanwoo Choi Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged

2021-05-11T12:04:09+00:00

[ Upstream commit c309a3e8793f7e01c4a4ec7960658380572cb576 ] When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Charles Keepax Tested-by: Charles Keepax Acked-by: Chanwoo Choi Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

extcon: Fix error handling in extcon_dev_register

2021-04-07T12:47:43+00:00

[ Upstream commit d3bdd1c3140724967ca4136755538fa7c05c2b4e ] When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by: Dinghao Liu Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin

extcon: max77693: Fix modalias string

2020-12-30T10:51:24+00:00

[ Upstream commit e1efdb604f5c9903a5d92ef42244009d3c04880f ] The platform device driver name is "max77693-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device") Signed-off-by: Marek Szyprowski Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin

extcon: ptn5150: Fix usage of atomic GPIO with sleeping GPIO chips

2020-11-05T10:43:24+00:00

commit 6aaad58c872db062f7ea2761421ca748bd0931cc upstream. The driver uses atomic version of gpiod_set_value() without any real reason. It is called in a workqueue under mutex so it could sleep there. Changing it to "can_sleep" flavor allows to use the driver with all GPIO chips. Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver") Cc: Signed-off-by: Krzysztof Kozlowski Reviewed-by: Vijai Kumar K Signed-off-by: Chanwoo Choi Signed-off-by: Greg Kroah-Hartman

extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'

2020-06-24T15:50:36+00:00

[ Upstream commit bc84cff2c92ae5ccb2c37da73756e7174b1b430f ] In some error handling paths, a call to 'iio_channel_get()' is not balanced by a corresponding call to 'iio_channel_release()'. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function. Fixes: 19939860dcae ("extcon: adc_jack: adc-jack driver to support 3.5 pi or simliar devices") Signed-off-by: Christophe JAILLET Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin