kernel/linux.git/drivers/extcon, branch linux-5.11.y

extcon: arizona: Fix various races on driver unbind

2021-05-12T06:37:22+00:00

[ Upstream commit e5b499f6fb17bc95a813e85d0796522280203806 ] We must free/disable all interrupts and cancel all pending works before doing further cleanup. Before this commit arizona_extcon_remove() was doing several register writes to shut things down before disabling the IRQs and it was cancelling only 1 of the 3 different works used. Move all the register-writes shutting things down to after the disabling of the IRQs and add the 2 missing cancel_delayed_work_sync() calls. This fixes various possible races on driver unbind. One of which would always trigger on devices using the mic-clamp feature for jack detection. The ARIZONA_MICD_CLAMP_MODE_MASK update was done before disabling the IRQs, causing: 1. arizona_jackdet() to run 2. detect a jack being inserted (clamp disabled means jack inserted) 3. call arizona_start_mic() which: 3.1 Enables the MICVDD regulator 3.2 takes a pm_runtime_reference And this was all happening after the ARIZONA_MICD_ENA bit clearing, which would undo 3.1 and 3.2 because the ARIZONA_MICD_CLAMP_MODE_MASK update was being done after the ARIZONA_MICD_ENA bit clearing. So this means that arizona_extcon_remove() would exit with 1. MICVDD enabled and 2. The pm_runtime_reference being unbalanced. MICVDD still being enabled caused the following oops when the regulator is released by the devm framework: [ 2850.745757] ------------[ cut here ]------------ [ 2850.745827] WARNING: CPU: 2 PID: 2098 at drivers/regulator/core.c:2123 _regulator_put.part.0+0x19f/0x1b0 [ 2850.745835] Modules linked in: extcon_arizona ... ... [ 2850.746909] Call Trace: [ 2850.746932] regulator_put+0x2d/0x40 [ 2850.746946] release_nodes+0x22a/0x260 [ 2850.746984] __device_release_driver+0x190/0x240 [ 2850.747002] driver_detach+0xd4/0x120 ... [ 2850.747337] ---[ end trace f455dfd7abd9781f ]--- Note this oops is just one of various theoretically possible races caused by the wrong ordering inside arizona_extcon_remove(), this fixes the ordering fixing all possible races, including the reported oops. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Charles Keepax Tested-by: Charles Keepax Acked-by: Chanwoo Choi Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

extcon: arizona: Fix some issues when HPDET IRQ fires after the jack has been unplugged

2021-05-12T06:37:22+00:00

[ Upstream commit c309a3e8793f7e01c4a4ec7960658380572cb576 ] When the jack is partially inserted and then removed again it may be removed while the hpdet code is running. In this case the following may happen: 1. The "JACKDET rise" or ""JACKDET fall" IRQ triggers 2. arizona_jackdet runs and takes info->lock 3. The "HPDET" IRQ triggers 4. arizona_hpdet_irq runs, blocks on info->lock 5. arizona_jackdet calls arizona_stop_mic() and clears info->hpdet_done 6. arizona_jackdet releases info->lock 7. arizona_hpdet_irq now can continue running and: 7.1 Calls arizona_start_mic() (if a mic was detected) 7.2 sets info->hpdet_done Step 7 is undesirable / a bug: 7.1 causes the device to stay in a high power-state (with MICVDD enabled) 7.2 causes hpdet to not run on the next jack insertion, which in turn causes the EXTCON_JACK_HEADPHONE state to never get set This fixes both issues by skipping these 2 steps when arizona_hpdet_irq runs after the jack has been unplugged. Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Charles Keepax Tested-by: Charles Keepax Acked-by: Chanwoo Choi Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

extcon: Fix error handling in extcon_dev_register

2021-04-07T13:02:33+00:00

[ Upstream commit d3bdd1c3140724967ca4136755538fa7c05c2b4e ] When devm_kcalloc() fails, we should execute device_unregister() to unregister edev->dev from system. Fixes: 046050f6e623e ("extcon: Update the prototype of extcon_register_notifier() with enum extcon") Signed-off-by: Dinghao Liu Signed-off-by: Chanwoo Choi Signed-off-by: Sasha Levin

extcon: max77693: Fix modalias string

2020-12-11T08:18:10+00:00

The platform device driver name is "max77693-muic", so advertise it properly in the modalias string. This fixes automated module loading when this driver is compiled as a module. Fixes: db1b9037424b ("extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device") Signed-off-by: Marek Szyprowski Signed-off-by: Chanwoo Choi

extcon: fsa9480: Support TI TSU6111 variant

2020-12-11T08:01:09+00:00

The Texas Instruments TSU6111 is compatible to the FSA880/FSA9480. Signed-off-by: Linus Walleij Signed-off-by: Chanwoo Choi

extcon: Add driver for TI TUSB320

2020-12-11T08:01:09+00:00

This patch adds an extcon driver for the TI TUSB320 USB Type-C device. This can be used to detect whether the port is configured as a downstream or upstream facing port. Signed-off-by: Michael Auchter Signed-off-by: Chanwoo Choi

extcon: axp288: Use module_platform_driver to simplify the code

2020-09-29T15:40:06+00:00

module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Liu Shixin Reviewed-by: Hans de Goede Signed-off-by: Chanwoo Choi

extcon: ptn5150: Do not print error during probe if nothing is attached

2020-09-29T15:38:54+00:00

The commit 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") reused code for checking CC status register in the probe path to determine what is initially connected. However if nothing is connected, the CC status register will have 0x0 value and print an error message: ptn5150 1-003d: Unknown Port status : 0 This is not an error. Also any other unknown port status values are not really errors but unhandled cases. Fixes: 85256f611f66 ("extcon: ptn5150: Check current USB mode when probing") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: ptn5150: Use defines for registers

2020-09-24T10:20:49+00:00

The register addresses are not continuous, so use simple defines for them. This also makes it easier to find the address for register. No functional change. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: palmas: Simplify with dev_err_probe()

2020-09-24T10:20:49+00:00

Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi