kernel/linux.git/drivers/extcon/extcon-usb-gpio.c, branch v6.19.11

Get rid of 'remove_new' relic from platform driver struct

2024-12-01T23:12:43+00:00

The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds

extcon: usb-gpio: Convert to platform remove callback returning void

2024-05-08T16:03:38+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Link: https://lore.kernel.org/lkml/8914cd71b32e1f6298e65b84fb84370c73b4fe37.1708876186.git.u.kleine-koenig@pengutronix.de/ Signed-off-by: Uwe Kleine-König Signed-off-by: Chanwoo Choi

extcon: usb-gpio: Remove disable irq operation in system sleep

2022-05-13T08:03:40+00:00

If disable vbus/id irq, it will lead to wakeup system fail in unisoc platform. In unisoc platform, Irq enable and irq wakeup are the same interrupt line. So remove disable vbus/id irq operation is a way to solve the issue. Signed-off-by: Bruce Chen Acked-by: Roger Quadros Signed-off-by: Chanwoo Choi

extcon: usb-gpio: fix a non-kernel-doc comment

2021-12-24T06:27:52+00:00

Do not use "/**" to begin a non-kernel-doc comment. Fixes this build warning: drivers/extcon/extcon-usb-gpio.c:23: warning: expecting prototype for drivers/extcon/extcon-usb-gpio.c(). Signed-off-by: Randy Dunlap Reported-by: kernel test robot Signed-off-by: Chanwoo Choi

extcon: usb-gpio: Use the right includes

2021-10-27T05:13:36+00:00

The USB GPIO extcon driver does not use any of the legacy includes or but exploits the fact that this brings in . Fix this up by using the right includes. Signed-off-by: Linus Walleij Signed-off-by: Chanwoo Choi

extcon: Replace HTTP links with HTTPS ones

2020-09-24T10:20:48+00:00

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Chanwoo Choi

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174

2019-05-30T18:26:41+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman

extcon: Split out extcon header file for consumer and provider device

2017-10-23T05:07:58+00:00

The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi Acked-by: Sebastian Reichel Acked-by: Chen-Yu Tsai Acked-by: Charles Keepax Acked-by: Lee Jones Acked-by: Felipe Balbi Acked-by: Yoshihiro Shimoda Acked-by: Kishon Vijay Abraham I

extcon: usb-gpio: Don't miss event during suspend/resume

2017-04-06T01:55:21+00:00

We must check for ID/VBUS changes during resume irrespective of whether our device wakeup is enabled or not. Without this we seem to be missing ID/VBUS events after system suspend/resume. Signed-off-by: Roger Quadros Signed-off-by: Chanwoo Choi

extcon: usb-gpio: Do not enable USB as wakeup source by default

2017-04-06T01:55:20+00:00

Whether the USB port as a wakeup source should be determined by user, but not enabled by default. Signed-off-by: Peter Chen Signed-off-by: Chanwoo Choi