kernel/linux.git/drivers/extcon/Kconfig, branch v6.19.11

extcon: max14526: depends on I2C to prevent build warning/errors

2025-09-08T06:13:06+00:00

Make EXTCON_MAX14526 depend on I2C to address a kconfig warning and subsequent build errors: WARNING: unmet direct dependencies detected for REGMAP_I2C Depends on [m]: I2C [=m] Selected by [y]: - EXTCON_MAX14526 [=y] && EXTCON [=y] ld: vmlinux.o: in function `max14526_driver_init': extcon-max14526.c:(.init.text+0x77b0e): undefined reference to `i2c_register_driver' ld: vmlinux.o: in function `max14526_driver_exit': extcon-max14526.c:(.exit.text+0x467c): undefined reference to `i2c_del_driver' Fixes: 145af3ddd1cd ("extcon: Add basic support for Maxim MAX14526 MUIC") Signed-off-by: Randy Dunlap Signed-off-by: Chanwoo Choi Link: https://lore.kernel.org/lkml/20250515234803.1385375-1-rdunlap@infradead.org/

extcon: Add basic support for Maxim MAX14526 MUIC

2025-09-08T05:43:00+00:00

The MAX14526 is designed to simplify interface requirements on portable devices by multiplexing common inputs (USB, UART, Microphone, Stereo Audio and Composite Video) on a single micro/mini USB connector. The USB input supports Hi-Speed USB and the audio/video inputs feature negative rail signal operation allowing simple DC coupled accessories. These device allow a single micro/mini USB port to support all the common interfaces on Cellular phones and portable media players over the same external lines. Link: https://lore.kernel.org/lkml/20250506073216.43059-3-clamor95@gmail.com/ Signed-off-by: Svyatoslav Ryhel Signed-off-by: Chanwoo Choi

extcon: Add LC824206XA microUSB switch driver

2024-09-04T15:43:08+00:00

Add a new driver for the ON Semiconductor LC824206XA microUSB switch and accessory detector chip. ON Semiconductor has an "Advance Information" datasheet available (ENA2222-D.PDF), but no full datasheet. So there is no documentation available for the registers. This driver is based on the register info from the extcon-fsa9285.c driver, from the Lollipop Android sources for the Lenovo Yoga Tablet 2 (Pro) 830 / 1050 / 1380 models. Note despite the name this is actually a driver for the LC824206XA not the FSA9285. This has only been tested on a Lenovo Yoga Tablet 2 Pro 1380 and using the driver on other setups may require additional work. So far this driver is only used on x86/ACPI (non devicetree) devs. Therefor there is no devicetree bindings documentation for this driver's "onnn,enable-miclr-for-dcp" property since this is not used in actual devicetree files and the dt bindings maintainers have requested properties with no actual dt users to _not_ be added to the dt bindings. Link: https://lore.kernel.org/lkml/20240512204019.58121-1-hdegoede@redhat.com/ Signed-off-by: Hans de Goede Signed-off-by: Chanwoo Choi

extcon: max8997: select IRQ_DOMAIN instead of depending on it

2024-05-08T16:03:38+00:00

IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Relying on it being set for a dependency is risky. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change EXTCON_MAX8997's use of "depends on" for IRQ_DOMAIN to "select". Link: https://lore.kernel.org/lkml/20240213060028.9744-1-rdunlap@infradead.org/ Fixes: dca1a71e4108 ("extcon: Add support irq domain for MAX8997 muic") Signed-off-by: Randy Dunlap Acked-by: Arnd Bergmann Signed-off-by: Chanwoo Choi

extcon: add Realtek DHC RTD SoC Type-C driver

2023-10-06T02:25:11+00:00

This patch adds the extcon driver for Realtek DHC (digital home center) RTD SoCs type-c module. This can be used to detect whether the port is configured as a downstream or upstream facing port. And notify the status of extcon to listeners. Link: https://lore.kernel.org/lkml/20230904051253.23208-2-stanley_chang@realtek.com/ Signed-off-by: Stanley Chang Signed-off-by: Chanwoo Choi

extcon: cht_wc: add POWER_SUPPLY dependency

2023-08-05T06:42:15+00:00

The driver fails to link when CONFIG_POWER_SUPPLY is disabled: x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop': extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata' x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event': extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed' x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe': extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register' It should be possible to change the driver to not require this at compile time and still provide other functions, but adding a hard Kconfig dependency does not seem to have any practical downsides and is simpler since the option is normally enabled anyway. Fixes: 66e31186cd2aa ("extcon: intel-cht-wc: Add support for registering a power_supply class-device") Signed-off-by: Arnd Bergmann Reviewed-by: Hans de Goede Signed-off-by: Chanwoo Choi

extcon: usbc-tusb320: add USB_ROLE_SWITCH dependency

2023-05-29T14:41:07+00:00

When CONFIG_USB_ROLE_SWITCH=m, tusb320 cannot be built-in: ld.lld: error: undefined symbol: fwnode_usb_role_switch_get >>> referenced by extcon-usbc-tusb320.c >>> drivers/extcon/extcon-usbc-tusb320.o:(tusb320_probe) in archive vmlinux.a ld.lld: error: undefined symbol: usb_role_switch_set_role >>> referenced by extcon-usbc-tusb320.c >>> drivers/extcon/extcon-usbc-tusb320.o:(tusb320_state_update_handler) in archive vmlinux.a Add the appropriate Kconfig dependency to prevent this configuration but still allow the driver to be built-in when USB_ROLE_SWITCH is disabled. Fixes: df101446a402 ("extcon: usbc-tusb320: add usb_role_switch support") Signed-off-by: Arnd Bergmann Reviewed-by: Alvin Šipraga Signed-off-by: Chanwoo Choi

extcon: usbc-tusb320: Add USB TYPE-C support

2022-09-25T19:40:13+00:00

The TI TUSB320 seems like a better fit for USB TYPE-C subsystem, which can expose details collected by the TUSB320 in a far more precise way than extcon. Since there are existing users in the kernel and in DT which depend on the extcon interface, keep it for now. Add TYPE-C interface and expose the supported supply current, direction and connector polarity via the TYPE-C interface. Signed-off-by: Marek Vasut Acked-by: Heikki Krogerus Reviewed-by: Alvin Šipraga Signed-off-by: Chanwoo Choi

extcon: ptn5150: Add usb role class support

2022-05-13T08:03:41+00:00

Some usb controller drivers may not support extcon but use usb role class as it's the preferred approach, so to support usb dual role switch with usb role class, add usb role class consumer support. Signed-off-by: Li Jun Reviewed-by: Krzysztof Kozlowski Signed-off-by: Chanwoo Choi

extcon: sm5502: Add support for SM5703

2022-05-13T08:03:40+00:00

SM5703 is another MFD from Silicon Mitus which has a very similar MUIC unit to the one in SM5502. The only difference I've noticed is slightly different configuration only enables the interrupts which are exactly the same as on SM5502. If we make use of different interrupts in the future, this can be improved by having a separate struct for SM5703, but the main functionality (detecting cable or OTG adapter) is working properly. Signed-off-by: Markuss Broks Signed-off-by: Chanwoo Choi