kernel/linux.git/drivers/edac, branch v4.14.263

EDAC/sb_edac: Fix top-of-high-memory value for Broadwell/Haswell

2021-11-26T10:40:23+00:00

commit 537bddd069c743759addf422d0b8f028ff0f8dbc upstream. The computation of TOHM is off by one bit. This missed bit results in too low a value for TOHM, which can cause errors in regular memory to incorrectly report: EDAC MC0: 1 CE Error at MMIOH area, on addr 0x000000207fffa680 on any memory Fixes: 50d1bb93672f ("sb_edac: add support for Haswell based systems") Cc: stable@vger.kernel.org Reported-by: Meeta Saggi Signed-off-by: Eric Badger Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20211010170127.848113-1-ebadger@purestorage.com Signed-off-by: Greg Kroah-Hartman

EDAC/synopsys: Fix wrong value type assignment for edac_mode

2021-10-06T13:05:09+00:00

commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream. dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman

EDAC/amd64: Fix PCI component registration

2020-12-29T12:47:06+00:00

commit 706657b1febf446a9ba37dc51b89f46604f57ee9 upstream. In order to setup its PCI component, the driver needs any node private instance in order to get a reference to the PCI device and hand that into edac_pci_create_generic_ctl(). For convenience, it uses the 0th memory controller descriptor under the assumption that if any, the 0th will be always present. However, this assumption goes wrong when the 0th node doesn't have memory and the driver doesn't initialize an instance for it: EDAC amd64: F17h detected (node 0). ... EDAC amd64: Node 0: No DIMMs detected. But looking up node instances is not really needed - all one needs is the pointer to the proper device which gets discovered during instance init. So stash that pointer into a variable and use it when setting up the EDAC PCI component. Clear that variable when the driver needs to unwind due to some instances failing init to avoid any registration imbalance. Cc: Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20201122150815.13808-1-bp@alien8.de Signed-off-by: Greg Kroah-Hartman

EDAC/i5100: Fix error handling order in i5100_init_one()

2020-10-29T08:07:00+00:00

[ Upstream commit 857a3139bd8be4f702c030c8ca06f3fd69c1741a ] When pci_get_device_func() fails, the driver doesn't need to execute pci_dev_put(). mci should still be freed, though, to prevent a memory leak. When pci_enable_device() fails, the error injection PCI device "einj" doesn't need to be disabled either. [ bp: Massage commit message, rename label to "bail_mc_free". ] Fixes: 52608ba205461 ("i5100_edac: probe for device 19 function 0") Signed-off-by: Dinghao Liu Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200826121437.31606-1-dinghao.liu@zju.edu.cn Signed-off-by: Sasha Levin

EDAC/ie31200: Fallback if host bridge device is already initialized

2020-09-03T09:22:27+00:00

[ Upstream commit 709ed1bcef12398ac1a35c149f3e582db04456c2 ] The Intel uncore driver may claim some of the pci ids from ie31200 which means that the ie31200 edac driver will not initialize them as part of pci_register_driver(). Let's add a fallback for this case to 'pci_get_device()' to get a reference on the device such that it can still be configured. This is similar in approach to other edac drivers. Signed-off-by: Jason Baron Cc: Borislav Petkov Cc: Mauro Carvalho Chehab Cc: linux-edac Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/1594923911-10885-1-git-send-email-jbaron@akamai.com Signed-off-by: Sasha Levin

EDAC: Fix reference count leaks

2020-08-21T07:48:03+00:00

[ Upstream commit 17ed808ad243192fb923e4e653c1338d3ba06207 ] When kobject_init_and_add() returns an error, it should be handled because kobject_init_and_add() takes a reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Therefore, replace calling kfree() and call kobject_put() and add a missing kobject_put() in the edac_device_register_sysfs_main_kobj() error path. [ bp: Massage and merge into a single patch. ] Fixes: b2ed215a3338 ("Kobject: change drivers/edac to use kobject_init_and_add") Signed-off-by: Qiushi Wu Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20200528202238.18078-1-wu000273@umn.edu Link: https://lkml.kernel.org/r/20200528203526.20908-1-wu000273@umn.edu Signed-off-by: Sasha Levin

EDAC/amd64: Read back the scrub rate PCI register on F15h

2020-07-09T07:36:30+00:00

[ Upstream commit ee470bb25d0dcdf126f586ec0ae6dca66cb340a4 ] Commit: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") added support for F15h, model 0x60 CPUs but in doing so, missed to read back SCRCTRL PCI config register on F15h CPUs which are *not* model 0x60. Add that read so that doing $ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate can show the previously set DRAM scrub rate. Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") Reported-by: Anders Andersson Signed-off-by: Borislav Petkov Cc: #v4.4.. Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.com Signed-off-by: Sasha Levin

EDAC/amd64: Set grain per DIMM

2020-03-11T17:02:56+00:00

[ Upstream commit 466503d6b1b33be46ab87c6090f0ade6c6011cbc ] The following commit introduced a warning on error reports without a non-zero grain value. 3724ace582d9 ("EDAC/mc: Fix grain_bits calculation") The amd64_edac_mod module does not provide a value, so the warning will be given on the first reported memory error. Set the grain per DIMM to cacheline size (64 bytes). This is the current recommendation. Fixes: 3724ace582d9 ("EDAC/mc: Fix grain_bits calculation") Signed-off-by: Yazen Ghannam Signed-off-by: Borislav Petkov Cc: "linux-edac@vger.kernel.org" Cc: James Morse Cc: Mauro Carvalho Chehab Cc: Robert Richter Cc: Tony Luck Link: https://lkml.kernel.org/r/20191022203448.13962-7-Yazen.Ghannam@amd.com [jwang: backport to 4.14 for fix warning during memory error. ] Signed-off-by: Jack Wang Signed-off-by: Sasha Levin

EDAC/mc: Fix edac_mc_find() in case no device is found

2020-01-27T13:46:34+00:00

[ Upstream commit 29a0c843973bc385918158c6976e4dbe891df969 ] The function should return NULL in case no device is found, but it always returns the last checked mc device from the list even if the index did not match. Fix that. I did some analysis why this did not raise any issues for about 3 years and the reason is that edac_mc_find() is mostly used to search for existing devices. Thus, the bug is not triggered. [ bp: Drop the if (mci->mc_idx > idx) test in favor of readability. ] Fixes: c73e8833bec5 ("EDAC, mc: Fix locking around mc_devices list") Signed-off-by: Robert Richter Signed-off-by: Borislav Petkov Cc: "linux-edac@vger.kernel.org" Cc: James Morse Cc: Mauro Carvalho Chehab Link: https://lkml.kernel.org/r/20190514104838.15065-1-rrichter@marvell.com Signed-off-by: Sasha Levin

EDAC/ghes: Fix grain calculation

2019-12-31T11:37:36+00:00

[ Upstream commit 7088e29e0423d3195e09079b4f849ec4837e5a75 ] The current code to convert a physical address mask to a grain (defined as granularity in bytes) is: e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); This is broken in several ways: 1) It calculates to wrong grain values. E.g., a physical address mask of ~0xfff should give a grain of 0x1000. Without considering PAGE_MASK, there is an off-by-one. Things are worse when also filtering it with ~PAGE_MASK. This will calculate to a grain with the upper bits set. In the example it even calculates to ~0. 2) The grain does not depend on and is unrelated to the kernel's page-size. The page-size only matters when unmapping memory in memory_failure(). Smaller grains are wrongly rounded up to the page-size, on architectures with a configurable page-size (e.g. arm64) this could round up to the even bigger page-size of the hypervisor. Fix this with: e->grain = ~mem_err->physical_addr_mask + 1; The grain_bits are defined as: grain = 1 << grain_bits; Change also the grain_bits calculation accordingly, it is the same formula as in edac_mc.c now and the code can be unified. The value in ->physical_addr_mask coming from firmware is assumed to be contiguous, but this is not sanity-checked. However, in case the mask is non-contiguous, a conversion to grain_bits effectively converts the grain bit mask to a power of 2 by rounding it up. Suggested-by: James Morse Signed-off-by: Robert Richter Signed-off-by: Borislav Petkov Reviewed-by: Mauro Carvalho Chehab Cc: "linux-edac@vger.kernel.org" Cc: Tony Luck Link: https://lkml.kernel.org/r/20191106093239.25517-11-rrichter@marvell.com Signed-off-by: Sasha Levin