kernel/linux.git/drivers/edac/synopsys_edac.c, branch v7.1

EDAC/synopsys: Clear the ECC counters on init

2025-07-14T10:15:37+00:00

Clear the ECC error and counter registers during initialization/probe to avoid reporting stale errors that may have occurred before EDAC registration. For that, unify the Zynq and ZynqMP ECC state reading paths and simplify the code. [ bp: Massage commit message. Fix an -Wsometimes-uninitialized warning as reported by Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202507141048.obUv3ZUm-lkp@intel.com ] Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/20250713050753.7042-1-shubhrajyoti.datta@amd.com

Get rid of 'remove_new' relic from platform driver struct

2024-12-01T23:12:43+00:00

The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds

EDAC/synopsys: Fix error injection on Zynq UltraScale+

2024-08-01T14:27:46+00:00

The Zynq UltraScale+ MPSoC DDR has a disjoint memory from 2GB to 32GB. The DDR host interface has a contiguous memory so while injecting errors, the driver should remove the hole else the injection fails as the address translation is incorrect. Introduce a get_mem_info() function pointer and set it for Zynq UltraScale+ platform to return host address. Fixes: 1a81361f75d8 ("EDAC, synopsys: Add Error Injection support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240711100656.31376-1-shubhrajyoti.datta@amd.com

EDAC/synopsys: Fix ECC status and IRQ control race condition

2024-05-06T12:19:07+00:00

The race condition around the ECCCLR register access happens in the IRQ disable method called in the device remove() procedure and in the ECC IRQ handler: 1. Enable IRQ: a. ECCCLR = EN_CE | EN_UE 2. Disable IRQ: a. ECCCLR = 0 3. IRQ handler: a. ECCCLR = CLR_CE | CLR_CE_CNT | CLR_CE | CLR_CE_CNT b. ECCCLR = 0 c. ECCCLR = EN_CE | EN_UE So if the IRQ disabling procedure is called concurrently with the IRQ handler method the IRQ might be actually left enabled due to the statement 3c. The root cause of the problem is that ECCCLR register (which since v3.10a has been called as ECCCTL) has intermixed ECC status data clear flags and the IRQ enable/disable flags. Thus the IRQ disabling (clear EN flags) and handling (write 1 to clear ECC status data) procedures must be serialised around the ECCCTL register modification to prevent the race. So fix the problem described above by adding the spin-lock around the ECCCLR modifications and preventing the IRQ-handler from modifying the IRQs enable flags (there is no point in disabling the IRQ and then re-enabling it again within a single IRQ handler call, see the statements 3a/3b and 3c above). Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Serge Semin Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20240222181324.28242-2-fancer.lancer@gmail.com

EDAC/synopsys: Convert to devm_platform_ioremap_resource()

2024-01-23T13:32:41+00:00

Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Michal Simek Link: https://lore.kernel.org/r/20230704101811.49637-3-frank.li@vivo.com

EDAC/synopsys: Convert to platform remove callback returning void

2023-11-20T22:29:21+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20231004131254.2673842-19-u.kleine-koenig@pengutronix.de

EDAC: Explicitly include correct DT includes

2023-08-28T18:31:01+00:00

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Link: https://lore.kernel.org/r/20230714174434.4054728-1-robh@kernel.org Signed-off-by: Rob Herring

EDAC/synopsys: Re-enable the error interrupts on v3 hw

2022-07-22T12:31:38+00:00

zynqmp_get_error_info() writes 0 to the ECC_CLR_OFST register after an interrupt for a {un-,}correctable error is raised, which disables the error interrupts. Then the interrupt handler will be called only once. Therefore, re-enable the error interrupt line at the end of intr_handler() for v3.x Synopsys EDAC DDR. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun Signed-off-by: Borislav Petkov Reviewed-by: Shubhrajyoti Datta Acked-by: Michal Simek Cc: Link: https://lore.kernel.org/r/20220427015137.8406-3-sherry.sun@nxp.com

EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hw

2022-07-22T12:31:30+00:00

v3.x Synopsys EDAC DDR doesn't have the QOS Interrupt register. Use the ECC Clear Register to disable the error interrupts instead. Fixes: f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys EDAC DDR") Signed-off-by: Sherry Sun Signed-off-by: Borislav Petkov Reviewed-by: Shubhrajyoti Datta Acked-by: Michal Simek Cc: Link: https://lore.kernel.org/r/20220427015137.8406-2-sherry.sun@nxp.com

Merge tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras

2022-05-24T00:34:20+00:00

Pull EDAC updates from Borislav Petkov: - Switch ghes_edac to use the CPER error reporting routines and simplify the code considerably this way - Rip out the silly edac_align_ptr() contraption which was computing the size of the private structures of each driver and thus allowing for a one-shot memory allocation. This was clearly unnecessary and confusing so switch to simple and boring kmalloc* calls. - Last but not least, the usual garden variety of fixes, cleanups and improvements all over EDAC land * tag 'edac_updates_for_v5.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/xgene: Fix typo processsors -> processors EDAC/i5100: Remove unused inline function i5100_nrecmema_dm_buf_id() EDAC: Use kcalloc() EDAC/ghes: Change ghes_hw from global to static EDAC/armada_xp: Use devm_platform_ioremap_resource() EDAC/synopsys: Add a SPDX identifier EDAC/synopsys: Add driver support for i.MX platforms EDAC/dmc520: Don't print an error for each unconfigured interrupt line EDAC/mc: Get rid of edac_align_ptr() EDAC/device: Sanitize edac_device_alloc_ctl_info() definition EDAC/device: Get rid of the silly one-shot memory allocation in edac_device_alloc_ctl_info() EDAC/pci: Get rid of the silly one-shot memory allocation in edac_pci_alloc_ctl_info() EDAC/mc: Get rid of silly one-shot struct allocation in edac_mc_alloc() efi/cper: Reformat CPER memory error location to more readable EDAC/ghes: Unify CPER memory error location reporting efi/cper: Add a cper_mem_err_status_str() to decode error description powerpc/85xx: Remove fsl,85... bindings