kernel/linux.git/drivers/dma, branch v5.15.7

dmaengine: remove debugfs #ifdef

2021-11-25T08:48:41+00:00

commit b3b180e735409ca0c76642014304b59482e0e653 upstream. The ptdma driver has added debugfs support, but this fails to build when debugfs is disabled: drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup': drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root' 93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root' 96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt, | ^ drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root' 102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root); | ^ Remove the #ifdef in the header, as this only saves a few bytes, but would require ugly #ifdefs in each driver using it. Simplify the other user while we're at it. Fixes: e2fb2e2a33fa ("dmaengine: ptdma: Add debugfs entries for PTDMA") Fixes: 26cf132de6f7 ("dmaengine: Create debug directories for DMA devices") Signed-off-by: Arnd Bergmann Reviewed-by: Laurent Pinchart Link: https://lore.kernel.org/r/20210920122017.205975-1-arnd@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: bestcomm: fix system boot lockups

2021-11-18T18:17:16+00:00

commit adec566b05288f2787a1f88dbaf77ed8b0c644fa upstream. memset() and memcpy() on an MMIO region like here results in a lockup at startup on mpc5200 platform (since this first happens during probing of the ATA and Ethernet drivers). Use memset_io() and memcpy_toio() instead. Fixes: 2f9ea1bde0d1 ("bestcomm: core bestcomm support for Freescale MPC5200") Cc: stable@vger.kernel.org # v5.14+ Signed-off-by: Anatolij Gustschin Link: https://lore.kernel.org/r/20211014094012.21286-1-agust@denx.de Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: ti: k3-udma: Set r/tchan or rflow to NULL if request fail

2021-11-18T18:17:16+00:00

commit eb91224e47ec33a0a32c9be0ec0fcb3433e555fd upstream. udma_get_*() checks if rchan/tchan/rflow is already allocated by checking if it has a NON NULL value. For the error cases, rchan/tchan/rflow will have error value and udma_get_*() considers this as already allocated (PASS) since the error values are NON NULL. This results in NULL pointer dereference error while de-referencing rchan/tchan/rflow. Reset the value of rchan/tchan/rflow to NULL if a channel request fails. CC: stable@vger.kernel.org Acked-by: Peter Ujfalusi Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20211031032411.27235-3-kishon@ti.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: ti: k3-udma: Set bchan to NULL if a channel request fail

2021-11-18T18:17:16+00:00

commit 5c6c6d60e4b489308ae4da8424c869f7cc53cd12 upstream. bcdma_get_*() checks if bchan is already allocated by checking if it has a NON NULL value. For the error cases, bchan will have error value and bcdma_get_*() considers this as already allocated (PASS) since the error values are NON NULL. This results in NULL pointer dereference error while de-referencing bchan. Reset the value of bchan to NULL if a channel request fails. CC: stable@vger.kernel.org Acked-by: Peter Ujfalusi Signed-off-by: Kishon Vijay Abraham I Link: https://lore.kernel.org/r/20211031032411.27235-2-kishon@ti.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: stm32-dma: avoid 64-bit division in stm32_dma_get_max_width

2021-11-18T18:17:11+00:00

[ Upstream commit 2498363310e9b5e5de0e104709adc35c9f3ff7d9 ] Using the % operator on a 64-bit variable is expensive and can cause a link failure: arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_get_max_width': stm32-dma.c:(.text+0x170): undefined reference to `__aeabi_uldivmod' arm-linux-gnueabi-ld: drivers/dma/stm32-dma.o: in function `stm32_dma_set_xfer_param': stm32-dma.c:(.text+0x1cd4): undefined reference to `__aeabi_uldivmod' As we know that we just want to check the alignment in stm32_dma_get_max_width(), there is no need for a full division, and using a simple mask is a faster replacement. Same in stm32_dma_set_xfer_param(), change this to only allow burst transfers if the address is a multiple of the length. stm32_dma_get_best_burst just after will take buf_len into account to fix burst in case of misalignment. Fixes: b20fd5fa310c ("dmaengine: stm32-dma: fix stm32_dma_get_max_width") Reported-by: kernel test robot Signed-off-by: Arnd Bergmann Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20211103153312.41483-1-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: stm32-dma: fix burst in case of unaligned memory address

2021-11-18T18:17:11+00:00

[ Upstream commit af229d2c2557b5cf2a3b1eb39847ec1de7446873 ] Theorically, address pointers used by STM32 DMA must be chosen so as to ensure that all transfers within a burst block are aligned on the address boundary equal to the size of the transfer. If this is always the case for peripheral addresses on STM32, it is not for memory addresses if the user doesn't respect this alignment constraint. To avoid a weird behavior of the DMA controller in this case (no error triggered but data are not transferred as expected), force no burst. Signed-off-by: Amelie Delaunay Link: https://lore.kernel.org/r/20211011094259.315023-4-amelie.delaunay@foss.st.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: idxd: fix resource leak on dmaengine driver disable

2021-11-18T18:17:04+00:00

[ Upstream commit a3e340c1574b6679f5b333221284d0959095da52 ] The wq resources needs to be released before the kernel type is reset by __drv_disable_wq(). With dma channels unregistered and wq quiesced, all the wq resources for dmaengine can be freed. There is no need to wait until wq is disabled. With the wq->type being reset to "unknown", the driver is skipping the freeing of the resources. Fixes: 0cda4f6986a3 ("dmaengine: idxd: create dmaengine driver for wq 'device'") Reported-by: Jacob Pan Tested-by: Jacob Pan Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/163517405099.3484556.12521975053711345244.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: idxd: reconfig device after device reset command

2021-11-18T18:17:03+00:00

[ Upstream commit e530a9f3db4188d1f4e3704b0948ef69c04d5ca6 ] Device reset clears the MSIXPERM table and the device registers. Re-program the MSIXPERM table and re-enable the error interrupts post reset. Fixes: 745e92a6d816 ("dmaengine: idxd: idxd: move remove() bits for idxd 'struct device' to device.c") Reported-by: Sanjay Kumar Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/163054188513.2853562.12077053294595278181.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmanegine: idxd: fix resource free ordering on driver removal

2021-11-18T18:17:03+00:00

[ Upstream commit 98da0106aac0d3c5d4a3c95d238f1ff88957bbfc ] Fault triggers on ioread32() when pci driver unbind is envoked. The placement of idxd sub-driver removal causes the probing of the device mmio region after the mmio mapping being torn down. The driver needs the sub-drivers to be unbound but not release the idxd context until all shutdown activities has been done. Move the sub-driver unregistering up before the remove() calls shutdown(). But take a device ref on the idxd->conf_dev so that the memory does not get freed in ->release(). When all cleanup activities has been done, release the ref to allow the idxd memory to be freed. [57159.542766] RIP: 0010:ioread32+0x27/0x60 [57159.547097] Code: 00 66 90 48 81 ff ff ff 03 00 77 1e 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3 8b 15 03 50 41 01 b8 ff ff ff ff 85 d2 75 04 c3 <8b> 07 c3 55 83 ea 01 48 89 fe 48 c7 c7 00 70 5f 82 48 89 e5 48 83 [57159.566647] RSP: 0018:ffffc900011abb60 EFLAGS: 00010292 [57159.572295] RAX: ffffc900011e0000 RBX: ffff888107d39800 RCX: 0000000000000000 [57159.579842] RDX: 0000000000000000 RSI: ffffffff82b1e448 RDI: ffffc900011e0090 [57159.587421] RBP: ffffc900011abb88 R08: 0000000000000000 R09: 0000000000000001 [57159.594972] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8881019840d0 [57159.602533] R13: ffff8881097e9000 R14: ffffffffa08542a0 R15: 00000000000003a8 [57159.610093] FS: 00007f991e0a8740(0000) GS:ffff888459900000(0000) knlGS:00000000000 00000 [57159.618614] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [57159.624814] CR2: ffffc900011e0090 CR3: 000000010862a002 CR4: 00000000003706e0 [57159.632397] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [57159.639973] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [57159.647601] Call Trace: [57159.650502] ? idxd_device_disable+0x41/0x110 [idxd] [57159.655948] idxd_device_drv_remove+0x2b/0x80 [idxd] [57159.661374] idxd_config_bus_remove+0x16/0x20 [57159.666191] __device_release_driver+0x163/0x240 [57159.671320] device_release_driver+0x2b/0x40 [57159.676052] bus_remove_device+0xf5/0x160 [57159.680524] device_del+0x19c/0x400 [57159.684440] device_unregister+0x18/0x60 [57159.688792] idxd_remove+0x140/0x1c0 [idxd] [57159.693406] pci_device_remove+0x3e/0xb0 [57159.697758] __device_release_driver+0x163/0x240 [57159.702788] device_driver_detach+0x43/0xb0 [57159.707424] unbind_store+0x11e/0x130 [57159.711537] drv_attr_store+0x24/0x30 [57159.715646] sysfs_kf_write+0x4b/0x60 [57159.719710] kernfs_fop_write_iter+0x153/0x1e0 [57159.724563] new_sync_write+0x120/0x1b0 [57159.728812] vfs_write+0x23e/0x350 [57159.732624] ksys_write+0x70/0xf0 [57159.736335] __x64_sys_write+0x1a/0x20 [57159.740492] do_syscall_64+0x3b/0x90 [57159.744465] entry_SYSCALL_64_after_hwframe+0x44/0xae [57159.749908] RIP: 0033:0x7f991e19c387 [57159.753898] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [57159.773564] RSP: 002b:00007ffc2ce2d6a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [57159.781550] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f991e19c387 [57159.789133] RDX: 000000000000000c RSI: 000055ee2630e140 RDI: 0000000000000001 [57159.796695] RBP: 000055ee2630e140 R08: 0000000000000000 R09: 00007f991e2324e0 [57159.804246] R10: 00007f991e2323e0 R11: 0000000000000246 R12: 000000000000000c [57159.811800] R13: 00007f991e26f520 R14: 000000000000000c R15: 00007f991e26f700 [57159.819373] Modules linked in: idxd bridge stp llc bnep sunrpc nls_iso8859_1 intel_ rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_code c_realtek iTCO_wdt 8250_dw snd_hda_codec_generic kvm_intel ledtrig_audio iTCO_vendor_s upport snd_hda_intel snd_intel_dspcfg ppdev kvm snd_hda_codec intel_wmi_thunderbolt sn d_hwdep irqbypass iwlwifi btusb snd_hda_core rapl btrtl intel_cstate snd_seq btbcm snd _seq_device btintel snd_pcm cfg80211 bluetooth pcspkr psmouse input_leds snd_timer int el_lpss_pci mei_me intel_lpss snd ecdh_generic ecc mei ucsi_acpi i2c_i801 idma64 i2c_s mbus virt_dma soundcore typec_ucsi typec wmi parport_pc parport video mac_hid acpi_pad sch_fq_codel drm ip_tables x_tables crct10dif_pclmul crc32_pclmul ghash_clmulni_intel usbkbd hid_generic usbmouse aesni_intel usbhid crypto_simd cryptd e1000e hid serio_ra w ahci libahci pinctrl_sunrisepoint fuse msr autofs4 [last unloaded: idxd] [57159.904082] CR2: ffffc900011e0090 [57159.907877] ---[ end trace b4e32f49ce9176a4 ]--- Fixes: 49c4959f04b5 ("dmaengine: idxd: fix sequence for pci driver remove() and shutdown()") Reported-by: Ziye Yang Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/163225535868.4152687.9318737776682088722.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: tegra210-adma: fix pm runtime unbalance

2021-11-18T18:17:03+00:00

[ Upstream commit c5a51fc89c0103c03b8a54cf12dac7d014b3a2bf ] The previous commit 059e969c2a7d ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding") forgets to replace the pm_runtime_get_sync in the tegra_adma_probe, but removes the pm_runtime_put_noidle. Fix this by continuing to replace pm_runtime_get_sync with pm_runtime_resume_and_get in tegra_adma_probe. Fixes: 059e969c2a7d ("dmaengine: tegra210-adma: Using pm_runtime_resume_and_get to replace open coding") Signed-off-by: Dongliang Mu Reviewed-by: Jon Hunter Link: https://lore.kernel.org/r/20211021030538.3465287-1-mudongliangabcd@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin