kernel/linux.git/drivers/dma, branch v5.10.78

dmaengine: xilinx_dma: Set DMA mask for coherent APIs

2021-09-26T12:09:00+00:00

[ Upstream commit aac6c0f90799d66b8989be1e056408f33fd99fe6 ] The xilinx dma driver uses the consistent allocations, so for correct operation also set the DMA mask for coherent APIs. It fixes the below kernel crash with dmatest client when DMA IP is configured with 64-bit address width and linux is booted from high (>4GB) memory. Call trace: [ 489.531257] dma_alloc_from_pool+0x8c/0x1c0 [ 489.535431] dma_direct_alloc+0x284/0x330 [ 489.539432] dma_alloc_attrs+0x80/0xf0 [ 489.543174] dma_pool_alloc+0x160/0x2c0 [ 489.547003] xilinx_cdma_prep_memcpy+0xa4/0x180 [ 489.551524] dmatest_func+0x3cc/0x114c [ 489.555266] kthread+0x124/0x130 [ 489.558486] ret_from_fork+0x10/0x3c [ 489.562051] ---[ end trace 248625b2d596a90a ]--- Signed-off-by: Radhey Shyam Pandey Reviewed-by: Harini Katakam Link: https://lore.kernel.org/r/1629363528-30347-1-git-send-email-radhey.shyam.pandey@xilinx.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: ioat: depends on !UML

2021-09-26T12:09:00+00:00

[ Upstream commit bbac7a92a46f0876e588722ebe552ddfe6fd790f ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: Geert Uytterhoeven Signed-off-by: Johannes Berg Acked-by: Dave Jiang Link: https://lore.kernel.org/r/20210809112409.a3a0974874d2.I2ffe3d11ed37f735da2f39884a74c953b258b995@changeid Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: sprd: Add missing MODULE_DEVICE_TABLE

2021-09-26T12:08:59+00:00

[ Upstream commit 4faee8b65ec32346f8096e64c5fa1d5a73121742 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot Signed-off-by: Zou Wei Reviewed-by: Baolin Wang Link: https://lore.kernel.org/r/1620094977-70146-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: idxd: depends on !UML

2021-09-26T12:08:59+00:00

[ Upstream commit b2296eeac91555bd13f774efa7ab7d4b12fb71ef ] Now that UML has PCI support, this driver must depend also on !UML since it pokes at X86_64 architecture internals that don't exist on ARCH=um. Reported-by: kernel test robot Signed-off-by: Johannes Berg Acked-by: Dave Jiang Acked-By: Anton Ivanov Link: https://lore.kernel.org/r/20210625103810.fe877ae0aef4.If240438e3f50ae226f3f755fc46ea498c6858393@changeid Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: idxd: fix wq slot allocation index check

2021-09-26T12:08:58+00:00

[ Upstream commit 673d812d30be67942762bb9e8548abb26a3ba4a7 ] The sbitmap wait and allocate routine checks the index that is returned from sbitmap_queue_get(). It should be idxd >= 0 as 0 is also a valid index. This fixes issue where submission path hangs when WQ size is 1. Fixes: 0705107fcc80 ("dmaengine: idxd: move submission to sbitmap_queue") Signed-off-by: Dave Jiang Link: https://lore.kernel.org/r/162697645067.3478714.506720687816951762.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: acpi: Avoid comparison GSI with Linux vIRQ

2021-09-26T12:08:57+00:00

commit 67db87dc8284070adb15b3c02c1c31d5cf51c5d6 upstream. Currently the CRST parsing relies on the fact that on most of x86 devices the IRQ mapping is 1:1 with Linux vIRQ. However, it may be not true for some. Fix this by converting GSI to Linux vIRQ before checking it. Fixes: ee8209fd026b ("dma: acpi-dma: parse CSRT to extract additional resources") Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210730202715.24375-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: imx-sdma: remove duplicated sdma_load_context

2021-09-18T11:40:09+00:00

commit e555a03b112838883fdd8185d613c35d043732f2 upstream. Since sdma_transfer_init() will do sdma_load_context before any sdma transfer, no need once more in sdma_config_channel(). Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") Cc: Signed-off-by: Robin Gong Acked-by: Vinod Koul Tested-by: Richard Leitner Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

Revert "dmaengine: imx-sdma: refine to load context only once"

2021-09-18T11:40:09+00:00

commit 8592f02464d52776c5cfae4627c6413b0ae7602d upstream. This reverts commit ad0d92d7ba6aecbe2705907c38ff8d8be4da1e9c, because in spi-imx case, burst length may be changed dynamically. Fixes: ad0d92d7ba6a ("dmaengine: imx-sdma: refine to load context only once") Cc: Signed-off-by: Robin Gong Acked-by: Sascha Hauer Tested-by: Richard Leitner Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available

2021-08-26T12:35:36+00:00

[ Upstream commit eda97cb095f2958bbad55684a6ca3e7d7af0176a ] If the router_xlate can not find the controller in the available DMA devices then it should return with -EPORBE_DEFER in a same way as the of_dma_request_slave_channel() does. The issue can be reproduced if the event router is registered before the DMA controller itself and a driver would request for a channel before the controller is registered. In of_dma_request_slave_channel(): 1. of_dma_find_controller() would find the dma_router 2. ofdma->of_dma_xlate() would fail and returned NULL 3. -ENODEV is returned as error code with this patch we would return in this case the correct -EPROBE_DEFER and the client can try to request the channel later. Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe()

2021-08-26T12:35:35+00:00

[ Upstream commit 1da569fa7ec8cb0591c74aa3050d4ea1397778b4 ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path. Reported-by: Hulk Robot Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin